Investigation of the Effect of Heat Stress on the Surface Properties of Wood Coatings

Document Type : Original Article

Authors

Department of Wood and Paper Science and Technology, Faculty of Natural Resources, University of Tehran, P. O. Box: 4111, Karaj, Iran

Abstract

This study investigates the effects of the thermal cycles on changes in impact resistance and hardness of some coatings used in the wood and furniture industries. Platanus wood species and three types of acrylic, polyurethane, and alkyd coatings made by the Reef factory were used. Also, scratch hardness, pendulum hardness, impact, and roughness tests were used to evaluate the surface properties of the samples before and after coating and thermal stresses. The results showed that the highest resistance to scratch hardness and pendulum hardness among the coatings were related to alkyd coatings. However, in the impact and surface roughness tests, it was found that Acrylic coating has more resistance than other polyurethane and alkyd coatings. Due to thermal stresses, the resistance generally decreased in all coatings, and the best performance was obtained with Acrylic coating. Also, the statistical analysis results showed a significant difference between Acrylic and alkyd coatings.

Keywords

References

  1. J. Chin, E. Byrd, J. Martin, T. Nguyen, Validation of the Reciprocity law for coating photo degradation, J. Coat. Technol. Res. 2 (2005), 499–508.
  2. S. Khojasteh Khosro, M. Ghofrani, M. Ganjaee Sari, The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface. Iranian J. Wood Paper Sci. Res. 4(2015), 690-704.
  3. P. Ahola, Adhesion between paint and wood substrate. Surf. Coat. Int. 74(1991), 173-176.
  4. L. F. de Moura, R. E. Hernandez, Effects of abrasive mineral, grit size and feed speed on the quality of sanded surfaces of sugar maple wood. Wood Sci Technol 40(2006), 517-530.
  5. T. Ramananantoandro, F. Eyma, C. Belloncle, S. Rince, M. Irle, Effect of machining parameters on raised grain occurring after the application of water-based finishes. Eur. J. Wood Wood Products. 76(2018), 1323-1333.
  6. E. A. Salca, T. Krystofiak, B. Lis, Evaluation of selected properties of Alder wood as functions of sanding and coating. Coat. 7(2017), 176-186.
  7. M. N. Acda, E. E. Devera, R. J. Cabangon, H. J. Ramos, Effects of plasma modification on adhesion properties of wood. Int. J. Adhes.Adhes. 32(2012), 70-75.
  8. T. Dilik, S. Erdinler, E. Hazir, H. Koç, S. Hiziroglu, Adhesion strength of wood based composites coated with cellulosic and polyurethane paints. Adv. Mater. Sci. Eng. (2015), 1-5.
  9. L. Gurleyen, U. Ayata, N. Cakıcıer, Effect of heat treatment on the adhesion strength, pendulum hardness, surface roughness, color and glossiness of Scot pine laminated parquet with two different types of varnish application. Maderas-Cienc Tecnol. 19(2017), 213-224.
  10. M. Nejad, T. Ung, P. Cooper, Effect of coatings on ACQ preservative component distribution and solubility after natural weathering exposure. Wood Sci Technol. 46(2012):1169-1180.
  11. E. A. Salca, T. Krystofiak, B. Lis, B. Mazela, S. Proszyk, Some coating properties of Black Alder wood as a function of varnish type and application method. Bioresources. 11(2016), 7580-7594.
  12. M. Nejad, P. Cooper, Exterior wood coatings. Part-2: modeling correlation between coating properties and their weathering performance. J. Coat. Technol. Res. 8(2011), 459-467.
  13. W. Darmawan, D. Nandika, E. Noviyanti, I. Alipraja, D. Lumongga, D. Gardnes, P. Gerardin, Wettability and bonding quality of exterior coatings on jabon and sengon wood surfaces. J. Coat. Technol Res. 15(2018), 95-104.
  14. C. Sogutlu, P. Nzokou, I. Koc, R. Tutgun, N. Döngeş, The effect of surface roughness on varnish adhesion strength of wood materials. J. Coat. Technol. Res. 13(2016), 863-870.
  15. P. Hayoz, W. Peter, D. Roges, A new innovative stabilization method for the protection of natural wood. Prog. Org. Coat. 48(2003), 297–309.
  16. E. Chwa, L. Wu, Z. Chen, Factors towards pencil scratch resistance of protective sol-gel coatings on polycarbonate substrate. Key Eng. Mater. 312(2006), 339-344.
  17. B. Kaygın, E. Akgün, A nano-technological product: An innovative varnish type for wooden surfaces. Sci. Res. Essay. 4(2008), 1-7.
  18. M. Sangermano, G. Malucelli, E. Amerio, A. Priola, E. Billi, G. Rizza, Photo polymerization of epoxy coatings containing silica nano-particles, Prog. Org. Coat. 54 (2005), 134–138.
  19. A. Dashtizadeh, M. Abdouss, H. Mahdavi, M. Khorassani, Acrylic coatings exhibiting improved hardness, solvent resistance and glossiness by using silica nano-composites. Appl.Surf. Sci. 257(2011), 2118-2125.
  20. E. S. Erdinler, K. H. Koc, T. Dilik, E. Hazir, Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints. Maderas. Ciencia y tecnología. 21(2019), 317-326.
  21. A. Hermann, D. Burr, V. Landry, Comparative study of the impact of additives against oxygen inhibition additives pendulum hardness and abrasion resistance for UV-curable wood finishes. Prog. Org. Coat. 148, (2020), 105879.
  22. L. Gurleyen, U. Ayata, B. Esteves, N. Cakicier, Effects of heat treatment on the adhesion strength, pendulum hardness, surface roughness, color and glossiness of Scots pine laminated parquet with two different types of UV varnish application. Maderas. Cienc. y Tecnol. 19(2017), 213-224.
  23. M. Pavlič, J. Žigon, M. Petrič, Wood Surface Finishing of Selected Invasive Tree Species. Wood industry/drvna industrija, 71(2020).
  24. A. Aghajani, M. Kalaee, S. Mazinani, Physical, mechanical and thermal properties of epoxy coatings modified with nitrile-butadiene nano-rubber. Adv. Mater. New Coat. 7(2019), 2036-2047
  25. A. Nowrouzi, B. Mohebby, The effects of different coatings on some surface properties of beech wood. For. Wood Prod. 69(2016), 173-184.
  26. Z. W. Zhong, S.Hiziroglu, C. T. M. Chan, Measurement of the surface roughness of wood based materials used in furniture manufacture. Meas. 46(2013), 1482-1487.
  27. Z. Nowrouzi, B. Mohebby, M. Ebrahimi, M. Petrič, The role of olive leaf extract and nanoparticles incorporation in polyacrylate coating structure on surface properties of heat treated wood during natural weathering. Forest and Wood Products, 73(2020), 1-12.
  28. N. Çakicier, S. Korkut, F. D. Güler, Effects of heating treatment on some of the physical properties of varnish layers applied on various wood species. African J. Biotechnol. 10(2011), 1578-1585.
  29. H. Gholamiyan, A. Tarmina, The effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture. Iranian J. Wood Paper Ind. 9(2019), 561-574.
  30. ASTM C1104 / C1104M-19, Standard Test Method for Determining the water vapor sorption of unfaced mineral fiber insulation, ASTM International, 2019.
  31. ASTM C411-19, Standard Test Method for hot-surface performance of high-temperature thermal insulation, ASTM International, West Conshohocken, PA, 2019.
  32. Standard Test Method for film hardness by pencil test, ASTM International, West Conshohocken, PA. ASTM Standard, D3363-05, 2005.
  33. A. Talae, A. Karimi, G. Ebrahimi, A. Mirshokrai, Comparative Study of Heat Treated Beech Wood in Hot Water and Steam Mediums. Iranian J. Wood Paper Ind. 2(2012), 27-38.
  34. M. Ghofrani, S. Khojasteh khosro, The effect of wood surface finishing quality on the adhesion strength of clear coats. J. Color Sci. Tech. 7(42013 339-345.

Files

Share

How to cite

Statistics