1
Department of Color Physics, Institute for Color Science and Technology
2
Textile Engineering Department, Amirkabir University of Technology
3
Textile Engineering Department, Isfahan University of Technology
Abstract
In this study, the characterization of a four-color halftone printer was carried out by original Neugebauer and n-modified Neugebauer models. According to the results, the modified Neugebauer method was led to a better outcome. Although the relation between target dot area and real dot area for a color inks were linear, the nonlinearity of target and real dot area for black ink caused some error especially in dark samples. In the n-modified Neugebauer model the nonlinearity between real and target dot area was considered. Therefore, this model was led to a better color reproduction accuracy as comparison with the original Neugebauer model. The results showed that the modified Neugebuer method is led to better outcome.
M. Abed, F., Amirshahi, S., & Mortazavi, S. M. (2007). Comparison of Neugebauer and n-Modified Neugebauer Models for the Characterization of a Four-color Halftone Printer. Journal of Color Science and Technology, 1(2), 97-110.
MLA
F. M. Abed; S.H. Amirshahi; S. M. Mortazavi. "Comparison of Neugebauer and n-Modified Neugebauer Models for the Characterization of a Four-color Halftone Printer", Journal of Color Science and Technology, 1, 2, 2007, 97-110.
HARVARD
M. Abed, F., Amirshahi, S., Mortazavi, S. M. (2007). 'Comparison of Neugebauer and n-Modified Neugebauer Models for the Characterization of a Four-color Halftone Printer', Journal of Color Science and Technology, 1(2), pp. 97-110.
VANCOUVER
M. Abed, F., Amirshahi, S., Mortazavi, S. M. Comparison of Neugebauer and n-Modified Neugebauer Models for the Characterization of a Four-color Halftone Printer. Journal of Color Science and Technology, 2007; 1(2): 97-110.
)
