ORIGINAL_ARTICLE
ارزیابی استحکام چسبندگی پوشش و ویژگیهای لایههای سطحی تختههای سبک وزن هسته فوم
هدف از تحقیق حاضر ارزیابی استحکام چسبندگی پوشش تختههای سبکوزن هسته فوم میباشد. تختههای سبکوزن با روش پیوسته یک مرحلهای و لایههای سطحی با ضخامتهای 3، 4 و 5 میلیمتر و با دمای پرس در دو سطح 130 و 160 درجه سانتیگراد تولید شدند. ویژگیهای لایههای سطحی و همچنین استحکام چسبندگی پوششهای آکریلیک پایه آب و پلییورتان پایه حلال اعمالی روی تختههای سبک وزن مورد بررسی قرار گرفت. نتایج حاصل از این مطالعه نشان داد که با افزایش ضخامت لایههای سطحی در تختههای تولیدی با دمای 130 درجه سانتیگراد، استحکام سطحی، زبری و ترشوندگی سطح افزایش قابل توجهی یافته است. در حالی که در تختههای تولیدی با دمای 160 درجه سانتیگراد با افزایش ضخامت لایههای سطحی، استحکام سطحی، زبری و ترشوندگی سطح کاهش قابل توجهی یافت. همچنین نتایج بیانگر بالاتر بودن میزان چسبندگی پوششهای پلییورتان در اکثر تیمارها نسبت به پوششهای آکریلیک پایه آب بود. بیشترین میزان چسبندگی پوشش نیز در تختههای تولیدی با دمای 130 درجه سانتیگراد، لایههای سطحی 5 میلیمتر و با پوشش پلییورتان به دست آمد.
https://jcst.icrc.ac.ir/article_81592_b76e1cead2cb0f539f10be93837302c1.pdf
2020-05-21
1
11
تختههای سبکوزن
پانل ساندویچی
آکریلیک
پلییورتان
پروفیل چگالی
ترشوندگی
قدرت چسبندگی پوشش
سعید
خجسته خسرو
saiedkhojasteh@ymail.com
1
گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تربیت مدرس نور، مازندران، ایران
AUTHOR
علی
شالبافان
ali.shalbafan@modares.ac.ir
2
گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تربیت مدرس نور، مازندران، ایران
LEAD_AUTHOR
هایکو
تومن
a_sh1674@yahoo.com
3
گروه مهندسی کشاورزی، چوب و عمران، دانشگاه علوم کاربردی برن، سوئیس
AUTHOR
Ü. Büyüksarı, Surface characteristics and hardness of MDF panels laminated with thermally compressed veneer. Composites Part B. 44(2013), 675-678.
1
A. Falahatnezhad, H. R. Mansouri, F. Heydari, Investigation of characteristics of green particleboard made with natural adhesive corn flour/soybean meal flour. J. For. Wood Prod. 71(2018), 61-70.
2
T. Dilik, S. Erdinler, E. Hazır, H. Koç, S. Hiziroglu, Adhesion strength of wood based composites coated with cellulosic and polyurethane paints. Adv. Mater. Sci. Eng. (2015), 1-5.
3
N. Ayrilmis, Z. Candan, T. Akbulut, O. Balkiz, Effect of sanding on surface properties of medium density fiberboard. Drvna industrija: Znanstveni časopis za pitanja drvne tehnologije. 61(2010), 175-181.
4
M. Akgül, S. Korkut, O. Çamlibel, Z. Candan, T. Akbulut, Wettability and surface roughness characteristics of medium density fiberboard panels from rhododendron (Rhododendron ponticum) biomass. Maderas. Cienc. Tecnol. 14(2012), 185-193.
5
P. H. G. de Cademartori, A. R. de Carvalho, P. R. D. Marangoni, M. A. C. Berton, P. Blanchet, G. I. B. de Muniz, W. L. E. Magalhães, Adhesion performance and film formation of acrylic emulsion coating on medium density fiberboard treated with Ar plasma. Int. Adhes. Adhes. 70(2016), 322-328.
6
N. Ayrilmis, J. T. Benthien, H. Thoemen, Effects of formulation variables on surface properties of wood plastic composites. Composites part B. 43(2012), 325-331.
7
S. C. Moldoveanu, V. David,. Selection of the HPLC method in chemical analysis. Elsevier. (2016).
8
G. Nemli, I. Ozturk, I. Aydin, Some of the parameters influencing surface roughness of particleboard. Build. Environ. 40(2005), 1337-1340.
9
G. Nemli, I. Aydin, E. Zekoviç, Evaluation of some of the properties of particleboard as function of manufacturing parameters. Mater Des, 28(2007),1169–76.
10
م. غفرانی، س. خجسته خسرو، اثر کیفیت پرداخت سطح چوب بر مقاومت چسبندگی در شفاف پوشهها. نشریه علمی علوم و فناوری رنگ. (1392)4، 345-339.
11
A. Miszczyk, T. Schauer, Electrochemical approach to evaluate the interlayer adhesion of organic coatings. Prog. Org. Coat. 52(2005), 298-305.
12
P. Bekhta, T. Krystofiak, S. Proszyk, B. Lis, Adhesion strength of thermally compressed and varnished wood (TCW) substrate. Prog. Org. Coat. 125(2018), 331-338.
13
E. S. Erdinler, K. H. Koc, T.Dilik, E. Hazir, Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints. Maderas. Cienc. Tecnol. 21(2019).
14
H. R. Taghiyari, A. Samadarpour, Effects of nanosilver-impregnation and heat treatment on coating pull-off adhesion strength on solid wood. Wood Industry/Drvna Industrija, 66(2015), 321–327.
15
T.Ozdemir, S.Hiziroglu, A. Malkocoglu, Influence of relative humidity on surface quality and adhesion strength of coated medium density fiberboard (MDF) panels. Mater. Design. 30(2009), 2543-2546.
16
S.Danu, D. Darsono, Electron beam curing of epoxy acrylate coatings on medium-density fiberboard. Indonesian J. Chem. 8(2008), 207-214.
17
A. Shalbafan, J. Welling, J. Luedtke, Effect of processing parameters on mechanical properties of lightweight foam core sandwich panels. Wood Mater. Sci. Eng. 7(2012), 69-75.
18
BS EN 311, Wood-based panels. Surface soundness. Test method. European Standardization Committee, Brussels; (2002).
19
J. G. Boon, R. Hashim, O. Sulaiman, T. Sugimoto, M. Sato, N. Salim, M. S. Fatimah, Importance of lignin on the properties of binderless particleboard made from oil palm trunk. ARPN J. Eng. Appl. Sci. 12(2006), 33–40.
20
S., Saadati, H. R, Mansouri, B. Nosrati, Manufacturing of adhesive free wood-based panels by using sanding dust. J. For. Wood Products. 70(2017), 325-331. (in Persian)
21
Z. W. Zhong, S.Hiziroglu, C. T. M. Chan, Measurement of the surface roughness of wood based materials used in furniture manufacture. Meas. 46(2013), 1482-1487.
22
T. Tabarsa, A. Ashori, M. Gholamzadeh, Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse. Composites Part B. 42(2011), 1330-1335.
23
A. Jahan Latibari, Science and technology of adhesion for lignocellulosic substances, Islamic Azad university, Karaj. (2007).
24
E. Csanády, E. Magoss, L. Tolvaj, Quality of machined wood surfaces, Springer. (2015).
25
A. Pizzi, K. L. Mittal, Wood adhesives. CRC Press, (2011).
26
K. Yaghoobi, Influence of hydrothermal treatment on physical, mechanical and acoustic properties of mulberry (Morus alba L.) Wood. Master's thesis, Noshahr and Chalous Islamic Azad University (2007).
27
G. Mirzaei, B. Mohebby, M.Tasooji, The effect of hydrothermal treatment on bond shear strength of beech wood. European J. Wood Wood Prod. 70(2012a), 705-709.
28
J. J. Weiland, R. Guyonnet, Study of chemical modification and fungi degradation of thermally modified wood using DRIFT spectroscopy. Holz als Roh- und Werkstoff. 61(2003), 216-220.
29
M. J. Boonstra, B. Tjeerdsma, Chemical analysis of heat treated softwoods. Holz als Roh-und Werkstoff. 64(2006), 204-211.
30
Gh. Mirzaei1, B. Mohebby, T. Tabarsa, Collapsibility and wettability of hydrothermally treated wood. Iranian J. Wood Paper Industries. 3(2012b), 1-11.
31
M. Ghofrani, E. Samadi, S. khojasteh khosro, Heat treatment of wood and the investigation of its effect on surface wettability and adhesion strength of coating. Iranian J. Wood Paper Sci. Res. 31(2016), 362-373. (in Persian)
32
W. Chelak, WH. Newman, MDI high moisture content bonding mechanism, parameters, and benefits using MDI in composite wood products. Proc. the. Washingt. State Univ. Int. Part. Mater. Ser. Symp. 1991.
33
K. Choupani, A. Shalbafan, J. Welling, Effect of ingredient ratios of rigid polyurethane foam on foam core panels properties. J. Appl. Polym. Sci. 134(2017), 44722-44729.
34
ORIGINAL_ARTICLE
مطالعه حذف مواد رنگزا از مخلوط دوتایی توسط پوست سبز فندق به عنوان پسماند کشاورزی با روش سطح پاسخ
جذب زیستی مواد رنگزای ایندیگوکارمین و متیل نارنجی در سیستمهای تک جزئی و دوجزئی به وسیله پوست سبز فندق با استفاده از روش سطح پاسخ بهینه شد.شرایط بهینه برای سیستمهای دو جزئی در pHبرابر 3 و غلظت جاذبg/l 0.1 و زمان تعادل برابر 60 دقیقه بهدست آمد. در این شرایط ظرفیت جذب کلmmol/g 0.12 بود. چهار مدل ایزوترم در سیستمهای تک جزئی و دو جزئی مقایسه شدند. ایزوترم فروندلیشو مدل سنتیک شبه درجه دوم به خوبی بر دادههای آزمایش برازش شدند. مطالعات ترمودینامیک نشان داد که فرآیند جذب زیستی خودبهخودی است. پوست سبز فندق به عنوان یک جاذب زیستی طبیعی، به علت ارزان بودن، در دسترس بودن و ظرفیت خوب جذب برای حذف مخلوط مواد رنگزا در ابعاد وسیع قابل استفاده است. مقایسه نتایج با دستاوردهای سایر جاذبها نشان داد کهپوست سبز فندق دارای ظرفیت جذب بالاتری برای این مواد رنگزا نسبت به کیتوسان، پوست جوز برزیلی، سبوس برنج، پوست موز و پوست پرتقال است.
https://jcst.icrc.ac.ir/article_81603_320f2986766268a8e0dc85d085084309.pdf
2020-05-21
13
23
جذب زیستی
ایندیگوکارمین
متیل نارنجی
سنتیک
ایزوترم
رضا
تبارکی
rezatabaraki@yahoo.com
1
گروه شیمی، دانشکده علوم پایه، دانشگاه ایلام، ایلام، ایران
LEAD_AUTHOR
نگار
صادقی نژاد
dr.negarsadeghi1366@gmail.com
2
دانشکده علوم پایه، دانشگاه ایلام، ایلام، ایران
AUTHOR
هایده
پورعجم
hayde_poorajam@yahoo.com
3
دانشکده علوم پایه، دانشگاه ایلام، ایلام، ایران
AUTHOR
V. Vimonses, B. Jin, C. W. K. Chow, Insight into removal kinetic and mechanisms of anionic dye by calcined clay materials and lime. J. Hazard. Mater.157(2010) 472-479.
1
T. Robinson, G. McMullan, R. Marchant, P. Nigam, Remediation of dyes in textile effluent: a critical review on current treatment technologies with a proposed alternative. Bioresour. Technol. 77(2001) 247-55.
2
B. Volesky, Z.R. Holan, Biosorption of heavy metals. Biotechnol. Prog.11(1999), 235–250.
3
س. احمدی اسبچین، ح. مرادی، ر. تبارکی، مطالعه تجزیه میکروبی ماده رنگزای ایندیگوکارمین توسط باکتری گرم منفی اسینتوباکتر لووفی. نشریه علمی علوم و فناوری رنگ. (1395)10، 70-65.
4
آ. اسفرم، م. ر. فتحی، حذف رنگزای آنیونی مستقیم قرمز B12 از محلولهای آبی با استفاده از جاذب کاه گندم: مطالعات ایزوترمی، سینتیکی و ترمودینامیکی. نشریه علمی علوم فناوری رنگ. (1392)7، 235-223.
5
ی. حمزه، ا. آزاده، س. ایزدیار، حذف رنگزای راکتیو Remazol Black B از آب آلوده با استفاده از پسماندهای لیگنوسلولزی ساقه کلزا. نشریه علمی علوم و فناوری رنگ. (1390)5، 85-77.
6
M. Dogan, H. Abak, M. Alkan, Adsorption of methylene blue onto hazelnut shell: Kinetics, mechanism and activation parameters. J. Hazard. Mater.164(2009), 172-181.
7
C. Ozer, M. Imamoglu, Y. Turhan, F. Boysan, Removal of methylene blue from aqueous solutions using phosphoric acid activated carbon produced from hazelnut husks. Toxicol. Environm. Sci. 94(2012), 1283-1293.
8
R. A. Carletto, F. Chimirri, F. Bosco, F. Ferrero, Adsorption of congo red dye on hazelnut shells and degradation with Phanerochaete chrysosporium. BioResources. 3(2009), 1146-1155.
9
R. H. Myers, D.C. Montgomery, Response surface methodology: process and product optimization using designed experiments. 2nd ed., John Wiley & Sons, USA, 2002.
10
K. Y. Foo, B. H. Hameed, Insights into the modeling of adsorption isotherm systems. Chem. Eng. J. 156(2010), 2-10.
11
A. G. S. Prado, J. D. Torres, E. A. Faria, S. C. L. Dias, Comperative adsorption studies of indigo carmine dye on chitin and chitosan. J. Colloid Interf. Sci. 277(2004), 43-47.
12
U. Lakshmi, V.C. Srivastava, I.D. Mall, D.H. Lataye, Rice husk ash as an effective adsorbent: Evaluation of adsorptive characteristics for indigo carmine dye. J. Environ. Manage. 90(2009), 710-720.
13
S. M. Oliveira Brito, H. M. Carvalho Andrade, L. Frota Soares, R.P. Azevedo, Brazil nut shells as a new biosorbent to remove methylene blue and indigo carmine from aqueous solutions. J. Hazard. Mater. 174(2010), 84-92.
14
V. K. Gupta, Application of low-cost adsorbents for dye removal–a review. J. Environ. Manag. 90(2009), 2313–2342.
15
A. Aishah, S.T. Jalil, Adsorption of methyl orange from aqueous solution onto calcined Lapindo volcanic mud. J. Hazard. Mater. 181(2010), 755-762.
16
F. Deniz, S.D. Saygideger, Equilibrium, Kinetic and thermodynamic studies of Acid orange 52 dye biosorption by Paulownia tomentosa Steud leaf powder as a low cost biosorbent. Bioresour. Technol. 101(2010), 5137-5143.
17
L. Ayed, E. Khelifi, H. B. Jannet, H. Miladi, A. C. Cheref, S. Achour, A. Bakhrouf, Response surface methodology for decolorization of azo dye methyl orange by bacteria consortium: produced enzymes and metabolites characterization. Chem. Eng. J. 165(2010), 200-208.
18
H. Chen, J. Zhao, J. Wu, G. Dai, Isotherm, thermodynamic, kinetic and adsorption mechanism studies of methyl orange by surfactant modified silkworm exuviae. J. Hazard. Mater. 192(2010), 246-254.
19
M. Vinoth, H.Y. Lim, R. Xavier, Removal of methyl orange from solutions using Yam leaf fibers. Int. J. Chem. Technol. 2(2010), 1892-1900.
20
A. Srinivasan, T. Viraraghavan, Decolorization of dye wastewaters by biosorbents: a review J. Environ. Manag. 91(2010), 1915-1929
21
ORIGINAL_ARTICLE
اصلاح غشا پلیسولفون با استفاده از نانوذره صمغ دانه ریحان به منظور حذف ماده رنگزای متیلن آبی از پساب
غشاهای جدید نانوکامپوزیت بر پایه پلیسولفون (PSf)حاوی درصدهای وزنی مختلف از نانوذرههای صمغ دانه ریحان (BSG)، با استفاده از روش جدایی فازی ناشی از بخارآب (VIPS) تولید شد. برای تولید نانوذرههای BSG با قطر متوسط 42 نانومتر،از آسیاب سیارهای استفاده شد. به منظور توصیف ساختار و عملکرد غشاهای نانوکامپوزیت از تصویربرداری SEM و طیفسنجی FTIRو همچنین اندازهگیری میزان آبدوستی، محتوای آب، خواص مکانیکی، تخلخل کلی، میانگین اندازه حفرهها، شار آب خالص و پسزنی متیلن بلو (MB)بهره گرفته شد. با افزودن نانوذرههای BSG، آبدوستی، شار آب خالص، مدول یانگ و پسزنی MBدر غشای PSfبه میزان چشمگیری بهبود یافت. شار آب خالص غشا با افزودن مقدار بهینه نانوذره یعنی ۳ درصد وزنی، بیشترین افزایش در حدود 5933 درصد از 0.6 تا 36.2 لیتر بر (متر مربع. ساعت) را نشان داد. بیشترین مقدار پسزنی MB (۹۹ درصد) برای غشای PSfحاوی 5 درصد وزنی نانوذره اندازهگیری شد.
https://jcst.icrc.ac.ir/article_81604_798058fd055152f03c32992f9e5642ef.pdf
2020-05-21
25
39
غشا نانوکامپوزیت پلیسولفون
نانوذره صمغ دانه ریحان
ماده رنگزای متیلن آبی
شار آب خالص
جدایی فازی ناشی از بخارآب
جمانه
تفرشی
j.tafreshi@tx.iut.ac.ir
1
دانشکده مهندسی نساجی، دانشگاه صنعتی اصفهان، اصفهان، ایران
AUTHOR
حسین
فشندی
h.fashandi@cc.iut.ac.ir
2
دانشکده مهندسی نساجی، دانشگاه صنعتی اصفهان، اصفهان، ایران
LEAD_AUTHOR
غزاله
امینی ارشاد
ghazaleh.ae@gmail.com
3
دانشکده مهندسی شیمی، دانشگاه صنعتی اصفهان، اصفهان، ایران
AUTHOR
G. Han, Y. Feng, T.-S. Chung, M. Weber, C. Maletzko, Phase inversion directly induced tight ultrafiltration (UF) hollow fiber membranes for effective removal of textile dyes. Environ. Sci. Technol. 51(2017), 14254–14261.
1
X. Chen, Y. Zhao, J. Moutinho, J. Shao, A. L. Zydney, Y. He, Recovery of small dye molecules from aqueous solutions using charged ultrafiltration membranes. J. Hazard. Mater., 284(2015), 58–64.
2
J. Lin, C. Y. Tang, W. Ye, S. Sun, S. H. Hamdan, A. Volodin, C. Van Haesendonck, A. Sotto, P. Luis, B. Van der Bruggen, Unraveling flux behavior of superhydrophilic loose nanofiltration membranes during textile wastewater treatment. J. Memb. Sci. 493(2015), 690–702.
3
A. Bouazizi et al., Removal of dyes by a new nano–TiO2 ultrafiltration membrane deposited on low-cost support prepared from natural Moroccan bentonite. Appl. Clay Sci. 149(2017), 127–135.
4
A. Lee, J. W. Elam, S. B. Darling, Membrane materials for water purification: design, development, and application. Environ. Sci. Water Res. Technol. 2(2016), 17–42.
5
G. E. Chen, W. G. Sun, Y. F. Kong, Q. Wu, L. Sun, J. Yu, Z. L. Xu, Hydrophilic Modification of PVDF microfiltration membrane with poly (ethylene glycol) dimethacrylate through surface polymerization. Polym. Plast. Technol. Eng. 57(2018), 108–117.
6
A. Nabe, Surface modification of polysulfone ultrafiltration membranes and fouling by BSA solutions. J. Memb. Sci. 133(1997), 57–72.
7
L. Yang, Z. Wang, J. Zhang, Zeolite imidazolate framework hybrid nanofiltration (NF) membranes with enhanced permselectivity for dye removal. J. Memb. Sci. 532(2017), 76–86.
8
S. J. Park, W. Choi, S. E. Nam, S. Hong, J. S. Lee, J. H. Lee, Fabrication of polyamide thin film composite reverse osmosis membranes via support-free interfacial polymerization. J. Memb. Sci. 526(2017), 52–59.
9
E. Bet-Moushoul, Y. Mansourpanah, K. Farhadi, M. Tabatabaei, TiO2 nanocomposite based polymeric membranes: a review on performance improvement for various applications in chemical engineering processes. Chem. Eng. J. 283(2016), 29–46.
10
A. L. Ahmad, A. A. Abdulkarim, B. S. Ooi, S. Ismail, Recent development in additives modifications of polyethersulfone membrane for flux enhancement. Chem. Eng. J. 223(2013), 246–267.
11
W. Chen, T. Ye, H. Xu, T. Chen, N. Geng, X. Gao, An ultrafiltration membrane with enhanced photocatalytic performance from grafted N–TiO2/graphene oxide. RSC Adv. 7(2017), 9880–9887.
12
A. Khalid, A. Abdel-Karim, M. Ali Atieh, S. Javed, G. McKay, PEG-CNTs nanocomposite PSU membranes for wastewater treatment by membrane bioreactor. Sep. Purif. Technol. 190(2018), 165–176.
13
آ. قلیان، ع. مهریزاد، پ. غربانی، جذب سطحی رنگزای آبی متیلن از محلولهای آبی بر روی نانو TiO2 عامل دارشده. نشریه علمی علوم و فناوری رنگ. (1394) 9، 43-35
14
M. Daria, H. Fashandi, M. Zarrebini, Z. Mohamadi, Contribution of polysulfone membrane preparation parameters on performance of cellulose nanomaterials. Mater. Res. Express. 6(2018), 15306.
15
S. Zwane, A. T. Kuvarega, S. D. Mhlanga, D. S. Dlamini, Effect of lantana camara on the morphology of polysulfone membranes for water purification. Chem. Select. 4(2019), 559–564.
16
C. Lavanya, K. Soontarapa, M. S. Jyothi, R. Geetha Balakrishna, Environmental friendly and cost effective caramel for congo red removal, high flux, and fouling resistance of polysulfone membranes. Sep. Purif. Technol. 211(2019), 348–358.
17
ش. خرمفر، ن. محمودی، م. آرامی، ک. قرنجیگ، رنگبری پساب رنگی نساجی با جاذب طبیعی تمرهندی: بررسی ایزوترم و سینتیک جذب، نشریه علمی علوم و فناوری رنگ. (1388) 3، 81-88
18
آ. نظرزاده زارع، م. منصور لکورج، م. معصومی، یک نانوکامپوزیت ابرجاذب دوستدارمحیط زیست برپایه (N- وینیل پیرولیدون- کو- مالئیک انیدرید) و کاربرد آن برای حذف ماده رنگزای قرمز کنگو از محلولهای آبی، نشریه علمی علوم و فناوری رنگ. (1396) 11، 275-286
19
A. Rafe, S. M. A. Razavi, Dynamic viscoelastic study on the gelation of basil seed gum. Int. J. Food Sci. Technol. 48(2013), 556–563.
20
S. H. Hosseini-Parvar, L. Matia-Merino, K. K. T. Goh, S. M. A. Razavi, S. A. Mortazavi, Steady shear flow behavior of gum extracted from Ocimum basilicum L. seed: Effect of concentration and temperature. J. Food Eng. 101(2010), 236–243.
21
S. H. Hosseini-Parvar, L. Matia-Merino, M. Golding, Effect of basil seed gum (BSG) on textural, rheological and microstructural properties of model processed cheese. Food Hydrocoll. 43(2015), 557–567.
22
W. Piatkiewicz, S. Rosiński, D. Lewińska, J. Bukowski, W. Judycki, Determination of pore size distribution in hollow fibre membranes. J. Memb. Sci. 153(1999), 91–102.
23
S. Naji-tabasi, S. Mohammad, A. Razavi, M. Mohebbi, Food hydrocolloids new studies on basil ( Ocimum bacilicum L .) seed gum : Part I e Fractionation , physicochemical and surface activity characterization. Food Hydrocoll. 52(2016), 350–358.
24
S. P. Nunes and T. Inoue, Evidence for spinodal decomposition and nucleation and growth mechanisms during membrane formation. J. Memb. Sci. 111(1996), 93–103.
25
P. Menut et al., A top surface liquid layer during membrane formation using vapor-induced phase separation (VIPS)-Evidence and mechanism of formation. J. Memb. Sci. 310(2008), 278–288.
26
G. R. Guillen, G. Z. Ramon, H. P. Kavehpour, R. B. Kaner, E. M. V Hoek, Direct microscopic observation of membrane formation by nonsolvent induced phase separation. J. Memb. Sci. 431(2013), 212–220.
27
L. Zhu, B. Zhu, L. Xu, Y. Feng, F. Liu, Y. Xu, “Corona-induced graft polymerization for surface modification of porous polyethersulfone membranes. Appl. Surf. Sci. 253(2007), 6052–6059.
28
M. Hu, Q. Yang, Z. Xu, Enhancing the hydrophilicity of polypropylene microporous membranes by the grafting of 2-hydroxyethyl methacrylate via a synergistic effect of photoinitiators. J. Memb. Sci. 285(2006), 196–205.
29
M. Saxena, S. Sharma, A. Bhattacharya, Recycling of polysulfone : study properties of membranes. Int. J. Membr. Sci. Technol. 2(2015), 39–46.
30
J. F. Li, Z. L. Xu, H. Yang, L. Y. Yu M. Liu, Effect of TiO2 nanoparticles on the surface morphology and performance of microporous PES membrane. Appl. Surf. Sci. 255(2009), 4725–4732
31
ORIGINAL_ARTICLE
بهبود چسبندگی پوششهای رنگی به چوب با استفاده از آمایش سطحی پلاسما
در این تحقیق تاثیر استفاده از آمایش سطحی پلاسما در بهبود چسبندگی پوشش پایه آب و پایه حلال پلییورتان در چوب مورد ارزیابی قرار گرفت. به همین منظور نمونههای چوبی از گونه صنوبر با رطوبت 8 درصد به ابعاد(L×R×T) 2×10× 15 میلیمتر تهیه و سطوح آنها با استفاده از پلاسما به مدت 60، 120، 300 و 600 ثانیه آمایش گردید. سپس، سطوح نمونهها با پوشش پلییورتان پایه حلال و پایه آب پوشش داده شد و پس از خشک شدن آن توسط دستگاه چسبندگی کششی (Pull off) میزان مقاومت به چسبندگی آنها اندازهگیری گردید. نتایج آزمون زاویه تماس نشان داد که تیمار پلاسما باعث کاهش زاویه تماس و افزایش خواصیت ترشوندگی سطح چوب شده است. همچنین، نتایج مطالعات چسبندگی کششی نشان دهنده آن است که کمترین و بیشترین میزان چسبندگی پس از آمایش پلاسما به ترتیب مربوط به پوشش پایه حلال با نسبت میانگین 2.9 (Mpa) و پوشش پایه آب با نسبت میانگین 3.4(Mpa) بود، که میتوان یکی از عوامل موثر آن را آبدوستی سطح چوب در اثر تیمار پلاسما دانست. تیمار با پلاسما اثر قابل توجهی بر افزایش چسبندگی پوشش داشته، به طوری که با افزایش زمان تیمار میزان چسبندگی بهبود یافته استو همچنین، بیشترین میزان تغییرات تاثیر پلاسما در واحد زمان مربوط به نمونه 60 ثانیه پلاسما شده بود. بنابراین، میتوان گفت؛ توانایی تیمار پلاسما برای افزایش چسبندگی پوششها بستگی به نوع رزین پوشش و زمان تیمار پلاسما دارد.
https://jcst.icrc.ac.ir/article_81605_c01e0dc583aa556789daeafd6b1d70ea.pdf
2020-05-21
41
47
پلاسما
چوب
چسبندگی
پوشش پایه آب
پوشش پایه حلال
هادی
غلامیان
hadi_gholamiyan@ut.ac.ir
1
گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج، ایران
AUTHOR
L. Tolvaj, L. Persze, L. Albert, Thermal degradation of wood during photodegradation. J. Photochem. Photobiol. B. 105(2011), 90-93.
1
R. Herrera, J. Sandak, E. Robles, T. Krystofiak, J. Labidi, Weathering resistance of thermally modified wood finished with coatings of diverse formulations. Prog. Org. Coat. 119(2018), 145-154.
2
J. Profili, O. Levasseur, A. Koronai, L. Stafford, N. Gherardi, Deposition of nanocomposite coatings on wood using cold discharges at atmospheric pressure. Surf. Coat. Technol. 309 (2017), 729-737.
3
J. E. Custodio, M. I. Eusebio, Waterborne acrylic varnishes durability on wood surfaces for exterior exposure. Prog. Org. Coat. 56 (2006), 59-67.
4
N. Tuck, Waterborne and solvent based alkyds and their end user applications. John Wiley & Sons in Association with SITA Technology Ltd., London. 2000. 150.
5
B. Kaygin, E. Akgun, Comparison of conventional varnishes with nanolake UV varnish with respect to hardness and adhesion durability. Int. J. Mol. Sci. 9 (2008), 476-485.
6
J. Cool, R. E. Hernández, Improving the sanding process of black spruce wood for surface quality and water-based coating adhesion. Forest Products J. 61(2011), 372-380.
7
ه. غلامیان، ا. طارمیان، ک. پورطهماسی، بررسی میکروسکوپی اثرات اصلاح سطح چوب با فرایند سل ژل بر کیفیت پوشش دهی آن با پوشش های آلکیدی و پلی اورتان. مجله صنایع چوب و کاغذ ایران. 8 (1396)، 520-509.
8
م. غفرانی، س. خجسته، اثر کیفیت پرداخت سطح چوب بر مقاومت چسبندگی در شفاف پوشهها. نشریه علمی علوم و فناوری رنگ. 7 (1392)، 345-339.
9
10. غ. معنوی، م. غفرانی، س. میرشکرایی، بررسی تاثیر نوع، درصد رطوبت چوب و نوع رنگ بر روی مقاومت چسبندگی کششی رنگ های شفاف رایج در صنایع مبلمان. تحقیقات علوم چوب و کاغذ ایران، 27 (1391)، 753-743.
10
11.آ. طلایی، م. رضوانی، ه. دوست محمدی، بررسی مقاومت چسبندگی پوششهای شفاف آلکیدی و نیتروسلولزی در فرآیندهای مختلف اصلاح گرمایی چوب صنوبر. نشریه علمی علوم و فناوری رنگ. 12 (1397)،
11
12.H. Taghiyari, Nano-zycosil in MDF: Gas and liquid permeability. Eur J Wood Prod, 71(2013), 353-360.
12
13.S. Wang, C. Liu, G. Liu, M. Zhang, J. Li, C. Wang, Fabrication of superhydrophobic wood surface by a sol-gel process. Appl. Surf. Sci. 258 (2011), 806-810.
13
14.H. Ma, D. Li, Ch. Liua, Zh. Huang, D. He, Q. Yan, P. Liua, Ph. Nash, D. Shena, An investigation of (NaPO3)6 effects and mechanisms during micro-arc oxidation of AZ31 magnesium alloy. Surf. Coat. Tech. 266 (2015), 151-159.
14
15.A. Fahmy, J. Friedrich, F. Poncin-Epaillard, D. Debarnot, Plasma polymerized allyl alcohol/O2 thin films embedded with silver nanoparticles. Thin Solid Films. 616 (2016), 339-347.
15
16.A. Y. Nikiforov, X. Deng, I. Onyshchenko, D. Vujosevic, V. Vuksanovic, U. Cvelbar, N. De Geyter, R. Morent, C. Leys, Atmospheric pressure plasma deposition of antimicrobial coatings on non-woven textiles. Eur. Phys. J. Appl. Phys. 75 (2016), 24710.
16
17.A. Wolkenhauer, G. Avramidis, E. Hauswald, H. Militz, W. Viöl, Plasma treatment of wood-plastic composites to enhance their adhesion properties. J. Adhes. Sci. Technol. 22 (2008), 2025-2037.
17
18.P. Rehn, A. Wolkenhauer, M. Bente, S. Förster, W. Viöl, Wood surface modification in dielectric barrier discharges at atmospheric pressure. Surf. Coat. Technol. 174 (2003), 515-518.
18
19.B. Riedl, C. Angel, J. Prégent, P. Blanchet, L. Stafford, Effect of wood surface modification by atmospheric-pressure plasma on waterborne coating adhesion. BioResources. 9 (2014), 4908-4923.
19
20.V. Blanchard, P. Blanchet, B. Riedl, Surface energy modification by radiofrequency inductive and capacitive plasma at low pressures on sugar maple: An exploratory study. Wood Fiber Sci. 41 (2009), 245-254.
20
21.M. N. Acda, E. E. Devera, R. J. Cabangon, H. J. Ramos. Effect of plasma on adhesion properties of wood. Int. J. Adhes. Adhes. 32 (2012), 70-75.
21
22.D. Lukowsky, G. Hora, Pretreatments of wood to enhance the performance of outdoor coatings. Macromol. Symp. 187 (2002), 77-85.
22
23.M. D. Meijer, Review on the durability of exterior wood coatings with reduced VOC-content. Prog. Org. Coat. 43 (2001), 217-225.
23
24.P. D. Evans, S. Vollmer, J. D.W. Kim, G. Chan, S. Kraushaar Gibson, Improving the performance of clear coatings on wood through the aggregation of marginal gains. Coat. 6 (2016), 66-75.
24
25.V . Rijckaert, M. Stevens, J. Van Acker, Effect of some formulation parameters on the penetration and adhesion of water-borne primers into wood. Eur. J. Wood Wood Prod. 59 (2001), 344–350.
25
26.J. G. Haase, L. H. Leung, P. D. Evans, Plasma pre-treatments to improve the weather resistance of polyurethane coatings on black spruce wood. Coatings. 9 (2019), 1-14.
26
ORIGINAL_ARTICLE
شناسایی رنگدانههای سبز و قرمز دیوارنگارههای دوره زندیه در شیراز با روش دستگاهی
رنگدانههای به کار رفته در دیوارنگارههای دوره زندیه (حدود 1193-1175 ه.ق) کمتر مورد بررسی فنشناسی قرارگرفتهاند. در این تحقیق دو رنگدانه قرمز و سبز دیوارنگارههای سه بنای زندیه کاخ کریم خان، عمارت دیوانخانه و عمارت هفتتنان با روشهای دستگاهی XRF ،XRD، FT-IR و PLMمورد بررسی قرار گرفتهاست. با شناسایی عناصر و ترکیبهای به کار رفته در این رنگدانهها در روشهای XRF, XRDو همچنین مقایسه طیفهای دریافتی در روش FT-IR با طیفهای موجود در پایگاه اطلاعاتی IRUG و عکسهای گرفتهشده از رنگدانهها زیر میکروسکوپ نوری PLMو تطبیق آنها با کتاب اطلس مربوطه،نتایج نشان دادند که رنگدانههای قرمز و سبز استفاده شده در دیوارنگارههای این سه بنای دوره زندیه از رنگدانههای معدنی ساخته شده و با توجه به نتیجه آزمایشها رنگ قرمز، قرمز سرب و شنگرف و سبز به کار رفته سبز مالاکیت است. با توجه به بررسی پیشینه شناخت رنگدانههای هنری و تاریخی قبل و بعد از دوره زندیه و نتیجه به دست آمده مشخص میشود که ایرانیها از ترکیبات محدودی استفاده میکردهاند و همانطور که سبک نقاشی دوره زندیه ادامه دهنده دورههای قبل و بویژه دوره صفویه است. در دوره زندیه نیز از رنگدانههایی که در دوره صفویه در نقاشی به کار برده شدهاستفاده میشده و در دوره قاجار نیز استفاده از این رنگدانهها ادامه یافته است.
https://jcst.icrc.ac.ir/article_81608_0c0d5d2cca5a58154c38c41b091b168e.pdf
2020-05-21
49
61
رنگدانه
دیوارنگاره
XRD
XRF
FT-IR
PLM
زندیه
فناوری
مرمت
زهرا
نیکویی
z7nikoei@gmail.com
1
دانشکده حفاظت و مرمت دانشگاه هنر تهران، تهران، ایران
AUTHOR
کورس
سامانیان
samanian_k@yahoo.com
2
دانشکده حفاظت و مرمت دانشگاه هنر تهران، تهران، ایران
LEAD_AUTHOR
ع. کوچکزایی، ع. نعمتی بابایلو، ل. دانشپور، شناسایی رنگدانههای مورد استفاده در تزئین کتیبه کاغذی خانه انصارین تبریز. نشریهعلمیپژوهشیعلوموفناوریرنگ. (1394)9، 306-297.
1
R. Shamse, Protection and restoration panel's coronation Mary, M.A thesis, Art University of Isfahan, Iran 2002.
2
P. Bayer Shams Muguyi, Conservation and restoration of two ghahveh khaneh paintings, M.A thesis, Art University of Isfahan, Iran 2003.
3
K. Samanian, Z. Abbasi, M. Dashtizadeh, Archaeological perspective on the Egyptian Girl tableau attributed to Kamal-al-molk Iranian painter in the Qajar era (1794 -1925 AD). Mediterr. Archaeol Archaeom. 1(2013), 75-92.
4
ک. سامانیان، ح. عباسیان، ز. عباسی، مطالعه فن شناسی پالت رنگ آثار نقاشی سهپایهای جعفر چهرهنگار در موزه مجلس شورای اسلامی. نشریه علمی علوم و فناوری رنگ. (1396)11، 136-121.
5
A. Amiriyeh, Study of four famous Safavid wall paintings, M.A thesis, Art University of Isfahan, Iran, 1998.
6
م. مقدسی، م. باتر، حفاظت و مرمت بخشی از نقاشی دیواری امامزاده معصوم روستای کروژده سبزوار. نشریه مرمت و پژوهش. (1386)3، 114-105.
7
S. Torabi, B. Pedram, Scientific and artistic research of murals in Gonbad- Azadan, Maremat & Pezhouhesh, 3(2006), 93-104.
8
م. میش مست، م. باتر، شناسایی رنگدانههای دیوارنگارههای تاریخی قلعه سام در کوه خواجه زابل. دوفصلنامه مرمت و پژوهش. (1388)3، 334-323.
9
S. Alizade, Recognizing the artistic value and how to repair the easel painting of Beitholahm church, B.A thesis, Art University of Isfahan, Iran, 1990.
10
P. Holakouee, A. Karimi, Analytical studies leading to the identification of the pigments used in the Pir-I Hamza Sabzpush tomb in Abarqu, Iran. Periodico di Mineralogia. 84 (3A)(2015), 389-405.
11
L. Gabriel Zadeh Kargar, Study, conservation, and restoration of wall paintings of Chehl Sotun in Qazvin, M.A thesis, Art University of Isfahan, Iran, 1994.
12
S. Khajeean, Photochemical degradation oil painting of restoration: case study Bie & Shery Hazrat Yusof by Mohammad Zaman, B.A thesis, Art University of Isfahan, Iran, 1995.
13
Z. Abbasi, Technical study of qajar easel paintings (1794_1925) for conservation Plan: A case study an Egyptian girl attributed to Kamal-al-Molk, M.A thesis, Art University of Tehran, Iran, 2012.
14
ف. شفیعی، ه. اسفندیاری پور، جلوه گاه هنر و معماری در کاخ کریم خانی، نشر سازمان میراث فرهنگی و گردشگری، فارس. (1384)، 116.
15
L. Shokrgozar, Restoration of paintings on plaster: case study conservation and restoration of paintings in Jahan Nama mansion in Shiraz B.A thesis, Art University of Isfahan, Iran, 2007.
16
ح. حسینی فسایی، فارسنامه ناصری، نشر امیر کبیر، تهران، (1378)112، 433.
17
Z. Nikoei, Studying the fundamentals restoration of wall painting (case study: three historical monuments in Shiraz), M.A thesis, Azad Islamic University, Iran, 2010.
18
B. H. Stuart, Analytical techniques in materials conservation, translated by M. Bagherzade kasiri, Islamic art university of Tabriz, Tabriz, 2013,176, 314-317.
19
http://www.irug.org/jcamp-details?id=868, accessed online Apr. 2019.
20
R. Jentens, A. Estat, Artist pigments, Esfahan, translated by H. Farahmand Brugeni, 2000, 55,78.
21
N. Eastaugh, V. Walsh, T. Chaplin, R. Siddall, Pigment compendium- science – 2008, 830-831.
22
C. McBride, A pigment particle & fiber atlas for paper conservators, Getty Trust Postgraduate, USA, 2002, 5-43.
23
ORIGINAL_ARTICLE
اثر کسر جرمی نانوقطرات آب و نسبت مولی آب به ماده فعال سطحی بر روی مکان جایگزیدگی مولکولهای ماده رنگزا درون میکروامولسیون
در این پژوهش، اثر کسر جرمی نانوقطرات آب (MFD) و مقدار آب بر روی مکان جایگزیدگی مولکولهای مواد رنگزا درون میکروامولسیون با استفاده از دستگاههای پراکندگی نور پویا (DLS) و طیفسنجی جذب مطالعه شد. مطالعه مشخصههای دینامیکی نانوقطرات آب به وسیله روش پراکندگی نور پویا نشان داد که با افزایش مقدار آب درون میکروامولسیون حاوی ماده رنگزا با غلظت مشخص، اندازه نانوقطرات افزایش مییابد. مطالعه طیفسنجی جذب ماده رنگزا درون نانوقطرات به وضوح نشان داد که طول موج جذب بیشینه ماده رنگزا درون نانوقطرات با افزایش مقدار آب تابعی از MFD کاهش مییابد. همچنین مطالعات طیفسنجی ماده رنگزا درون نانوقطرات نشان داد که ماده رنگزای آبدوست رودامین بی میتواند در نزدیکی دنباله زنجیره ماده فعال سطحی AOT در فصل مشترک آب/روغن درون میکروامولسیونجایگزیده شود. از طرف دیگر ، تعداد جفت یون ماده فعال سطحی -رودامین بی تشکیل شده در روغن با کاهش در مقدار آب درون میکروامولسیون افزایش یافت.
https://jcst.icrc.ac.ir/article_81610_f2375c14d7d79a3a56202a541ab6c16f.pdf
2020-05-21
63
71
رودامین بی
AOT
پراکندگی دینامیکی نور
نانو-قطرات
مقدار آب
جفت یون
طیفسنجی
عباس
رهدار
a.rahdarnanophysics@gmail.com
1
گروه فیزیک، دانشکده علوم پایه، دانشگاه زابل، زابل، ایران
LEAD_AUTHOR
عادله
مرادی کر
moradi_adeleh@yahoo.com
2
گروه فیزیک، دانشکده علوم پایه، دانشگاه زاهدان، زاهدان، ایران
AUTHOR
حامد
نجفی آشتیانی
hamednajafi59@yahoo.com
3
گروه فیزیک، دانشکده علوم پایه، دانشگاه ولایت، ایرانشهر، ایران
AUTHOR
M. Firoz-Khan, M. Kiran-Singh, S. Sen, Measuring Size, Size-Distribution and polydispersity of water-in-oil microemulsion droplets using fluorescence correlation spectroscopy: comparison to dynamic light scattering. J. Phys. Chem. B. 120 (2016), 1008- 1020.
1
A. Rahdar, M. Almasi-Kashi, Dynamic and spectroscopic studies of nano-micelles comprising dye in water/ dioctyl sodium sulfosuccinate /decane droplet microemulsion at constant water content. J. Mol. Struct. 1128 (2017), 257-267.
2
V. R. Hande, S. Chakrabarty, Exploration of the presence of bulk-like water in AOT reverse micelles and water- in-oil nanodroplets: the role of charged interfaces, confinement size and properties of water. Phys. Chem. Chem. Phys. 18(2016), 21767-79.
3
E. Bardez, R. Giordano, M. P.Jannelli, P. Migliardo, U. Wanderlingh, Hydrogen-bond effects induced by alcohol on the structure and dynamics of ionic reverse micelles. J. Mol. Structure. 383(1996), 183–190.
4
A. Rahdar, M. Almasi-Kashi, N. Mohamed, Light scattering and optic studies of Rhodamine B-comprising cylindrical- like AOT reversed micelles. J . Mol. Liq. 223 (2016),1264-1269.
5
A. Rahdar, M. Almasi-Kashi,Photophysics of Rhodamine B in the nanosized water droplets: A concentration dependence study. J. Mol. Liq. 220 (2016), 395–403.
6
A. Rahdar, M. Almasi-Kashi, Dynamic light scattering of nano-gels of xanthan gum biopolymer in colloidal dispersion. J. Adv. Res. 7( 2016), 635-641.
7
W. Meier, Langmuir, Structured polymer networks from O/W-Microemulsions and liquid crystalline phases. Langmuir. 12(1996), 6341-6345.
8
A. Rahdar , M. Almasi-Kashi, M. Aliahmad, Effect of chain length of oil on location of dye within AOT nanometer-sized droplet microemulsions at constant water content. J .Mol. Liq. 233 (2017), 398-402.
9
J. P. Cerón‐Carrasco,D. Jacquemin, C.Laurence, A.Planchat, C.Reichardt, K.Sraïdi, Solvent polarity scales: determination of new ET (30) values for 84 organic solvents. J. Phys. Org. Chem. 27(2014), 512-518.
10
S. De, S. Das, A.Girigoswami , Environmental effects on the aggregation of some xanthene dyes used in lasers, Spectrochim. Acta. A Mol. Biomol. Spectrosc. 61 (2005) 1821-1833.
11
K. K. Karukstis, D. A. Savin, C. T. Loftus, N. D. D’Angelo, Spectroscopic studies of the interaction of methyl orange with cationic alkyltrimethylammonium bromide surfactants. J. Colloid. Interface. Sci. 203 (1998), 157–163.
12
T. Fujieda, K. Ohta, N. Wakabayashi, S. Higuchi, H-aggregation of Methyl Orange at the Interface between the waterphase and oil phase in a water- in-oil microemulsion. J. Coll. Int. Sci. 185(1997), 332-334.
13
O. Ortona, V.Vitagliano, B.H.Robinson, Dye Interactions with surfactants in colloidal dispersions. J. Coll. Int. Sci. 125(1988), 271-278.
14
M. Hasegawa, T. Sugimura, Y. Shindo, A. Kitahara, Structure and properties of AOT reversed micelles as studied by the fluorescence probe technique. Colloids. Surf. A. 109(1996), 305-318.
15
M. D'Angelo, D. Fioretto, G. Onori, A. Santucci, Micellar interactions in water- in-oil microemulsions. J. Mol. Struct. 383 (1996), 157-163.
16
T. Bayraktutan, K.Meral, Y.Onganer, Photophysical properties of pyronin dyes in reverse micelles of AOT. J. Lumin. 145 (2014), 925–929.
17
N. M. Correa, J. J. Silber, Binding of nitroanilines to reverse micelles of AOT n- hexane. J. Mol. Liq. 72(1997), 163-76.
18
G. B. Dutt, Fluorescence anisotropy of ionic probes in aot reverse micelles: Influence of water droplet size and electrostatic interactions on probe dynamics. J. Phys. Chem. B. 112 (2008), 7220–7226.
19
V. Crupi, G. Maisano, D. Majolino, R. Ponterio, V. Villari, E. Caponetti, Quasi-elastic light scattering in polymer-containing microemulsion. J. Mol. Struct. 383(1996), 171-5.
20
D. P. Acharya, P. G. Hartley, Progress in microemulsion characterization. Curr. Opin. Colloid Interface Sci. 17 (2012), 274–280.
21
M. J. Hou, M. Kim, D. O.Shah, A light scattering study on the droplet size and interdroplet interaction in microemulsions of AOT-oil-water system. J. Colloid. Interface. Sci. 123(1988), 398-412.
22
Effects of the molecular structure of the interface and continuous phase on solubilization of water in water/oil microemulsions. Langmuir. 3 (1987), 1086-1096.
23
G. M. E. Diaz, A. Sanz-Medel, Dye-surfactant interactions: a review. Talanta. 33 (1986), 255-264.
24
D. A. Skoog, F. J. Holler, Principles of Instrumental Analysis, 5 ed. Saunders College Publication, Philadelphia, 1998.
25
F. L.Arbeloa, P. R.Ojeda, I. L.Arbeloa, Flourescence self-quenching of the molecular forms of Rhodamine B in aqueous and ethanolic solutions. Chem .Phys .Lett. 148 (1988), 253.
26
B. Valeur, M. N. Berberan-Santos, Molecular Fluorescence, Principles and Applications, 2ed, Wiley-VCH, Weinheim, 2012.
27
H.Gochman-Hecht, H. Bianco-Peled, Structure of AOT reverse micelles under shear. J. Colloid Int. Sci. 288 (2005), 230-237.
28
ص. مهویدی، ع. آشتیانی عبدی، ف. نورمحمدیان، ارتباط رنگ و ساختار مواد رنگزای آلی: مروری بر بیش از یک قرن پژوهش. نشریه علمی مطالعات در دنیای رنگ. (1393)3، 103-85.
29
ف. نورمحمدیان، م. داودزاده غلامی، ع. آشتیانیعبدی، بررسی اثرات حلال پوشی بر دینامیک مولکولی و جذب و نشر نور مواد رنگزای فوتوکرومیک بر پایه آزواسپیروپیرانها. نشریه علمی علوم و فناوری رنگ. (1394)9، 271-259.
30
O. Valdes-Aguilera, D.C.Neckers , Aggregation phenomena in xanthene dyes, Acc .Chem. Res. 22 (1989) 171–177.
31
F.L.Arbeloa, P.R.Ojeda, I.L.Arbeloa , On the aggregation of rhodamine B in ethanol, Chem .Phys .Lett. 148 (1988), 253-258.
32
M. A. Ali, J. Moghaddasi, S. A. Ahmed , Optical properties of cooled Rhodamine B in ethanol, J .Opt .Soc .Am. B 8(1991), 1807-1810.
33
ف.خاکزار بفروئی، ه. خلیلی، م. صفی، جداسازی اجزای فاکتور تشعشعات کلی مواد رنگزای فلورسنت. نشریه علمی پژوهشی علوم و فناوری رنگ. (1394)9، 361-351.
34
س. باستانی؛ م. پیشوایی؛ م. جلیلی؛ ش. سروشنیا ، تأثیر غلظت و توزیع اندازه ذرات رنگدانه بر رفتار رئولوژیکی مرکبهای لیتوگرافی. نشریه علمی پژوهشی علوم و فناوریرنگ. (1389)4، 103-91.
35
م. دهقانی، ن. نصیریزاده، س. جعفری، اندازهگیری مستقیم ماده رنگزای راکتیو نارنجی 84 در نمونههای در حال رنگبری با استفاده از الکترود کربن شیشهای اصلاح شده با اکسید گرافن / نانوذرات نقره. نشریه علمی پژوهشی علوم و فناوری رنگ (1397)12، 92-81.
36
ORIGINAL_ARTICLE
ساخت دیود نور گسیل آلی زرد و قرمز با اضافه کردن ماده رنگزا به روش لایهنشانی تکبوتهای
در این تحقیق دیود نور گسیل آلی زرد و قرمز با استفاده از لایه نشانی تک بوتهای ساخته شد. مشخصات الکتریکی، مختصات رنگی و نوری دیودهای ساخته شده مورد بررسی قرار گرفت. در این پژوهش اثر دوپکردن سه ماده رنگزای کومارین، قرمز نیلی و 3، 4- دی متوکسی پورفیرین در محیط کمپلکس آلومینیم (Alq3) که در منبع تبخیر آن از منبع تبخیر تکبوتهای به جای استفاده از منبع تبخیر سه و دوبوته، مورد بررسی قرارگرفت. دیود نور گسیل قرمز با دوپکردن قرمز نیلی: کومارین و دیود نورگسیل زرد با دوپکردن 3، 4- دی متوکسی پورفیرین: کومارین، داخل Alq3 به دست آمد. دوپ همزمانقرمز نیلی: کومارینو 3، 4- دی متوکسی پورفیرین: کومارین ولتاژشروع روشنایی وکاری را نسبت به قرمز نیلی و3، 4- دی متوکسی پورفیرین خالص داخل Alq3 برای چگالی جریان ثابت کاهش داد. بازدهی نوری بالا برای نیم درصد دوپشده حاصل شد. نتایج این پژوهش نشان داد که استفاده از یک بوته به جای سه بوته علاوه بر سادگی و ساخت فیلم یکنواخت، هزینههای لایه نشانی را هم پایین میآورد.
https://jcst.icrc.ac.ir/article_81617_28c78332c93d15ecdaea01c94807ca0a.pdf
2020-05-21
73
82
دیود نور گسیل آلی قرمز و زرد
لایه نشانی تک بوتهای
بازدهی نوری
ولتاژ شروع روشنایی وکاری
دوپ
محمد
جانقوری
m.janghouri@uut.ac.ir
1
دانشکده فناوریهای صنعتی، دانشگاه صنعتی ارومیه، ارومیه، ایران
LEAD_AUTHOR
عزالدین
مهاجرانی
m-mohajerani@sbu.ac.ir
2
پژوهشکده لیزر و پلاسما، دانشگاه شهید بهشتی، اوین، تهران، ایران
AUTHOR
مهدی
قلی پور اصل
mehdi.25.13.77@gmail.com
3
دانشکده فناوریهای صنعتی، دانشگاه صنعتی ارومیه، ارومیه، ایران
AUTHOR
پویا
پناهیان فر
panahianfar.pooya@gmail.com
4
دانشکده فناوریهای صنعتی، دانشگاه صنعتی ارومیه، ارومیه، ایران
AUTHOR
S. Grigalevicius, D. Tavgeniene, G. Krucaite, D. Blazevicius, R.Griniene, Yi-Ni. Lai, H. H. Chiu, C.H. Chang, Efficient blue and green phosphorescent OLEDs with host material containing electronically isolated carbazolyl fragments. Opt. Mater. 79(2018), 446-449.
1
J. Hu, S. Hu, C. Lu, Y. Huang, K. Xu, X. Wang, Assistant dopant system in solution processed phosphorescent OLEDs and its mechanism reveal. Opt. Mater. 75(2018), 513-520.
2
T. Lin, Q. Song, Z. Liu, B. Chu, W. Li, Y. Luo, C. S. Lee, Z. Su, Y. Li, Effects of acceptor on the performance of exciplex-based OLED. Synth. Met. 234(2017), 95-99.
3
M. Regnat, K. P. Pernstich, B. Ruhstaller, Influence of the bias-dependent emission zone on exciton quenching and OLED efficiency. Org. Electron. 70(2019), 219-226.
4
Y. Jia, S. Wu, Y. Zhang, S. Fan, X. Zhao, H. Liu, X. Dong, S. Wang, X. Li, Achieving non-doped deep-blue OLEDs by applying bipolar imidazole derivatives. Org. Electron. 69(2019), 289-296.
5
H. Peng, A. R. Yu, S. B. Liu, Y. He, X. Q. Chen, Y. M. Hu, Q. Zeng, J. J. Qin, Y. J. Tang, H. N. Xuxie, G. Y. Zhong, X. Y. Hou, Coulomb effect induced intrinsic degradation in OLED. Org. Electron. 65(2019), 370-374.
6
M. H. Tsai, Y. H. Hong, C. H. Chang, H. C. Su, C. C. Wu, A. Matoliukstyte, J. Simokaitiene, S. Grigalevicius, J. V. Grazulevicius, C. P. Hsu, High-efficiency blue organic light-emitting diodes using a 3,5-di(9H-carbazol-9-yl) tetraphenylsilane host via a solution-process. Adv. Mater.19(2007), 862.
7
E. L. Williams, K. Haavisto, J. Li, G. E. Jabbour, Excimer-based white phosphorescent organic light-emitting diodes with nearly 100 % internal quantum efficiency. Adv. Mater. 19(2007), 197-202.
8
M. Janghouri, S. Minasian, M. Mahmoudi, S. Eyvazi, Photo/electroluminescence and electron transport properties of new zinc complexes. Opt. Mater. 89 (2019), 488-493.
9
M Janghouri, White-light-emitting devices based on Nile Red and π electron rich [Zn4core] complex, Opt. Quant. Electron. 49 (2017), 410
10
ه. پوررادی، ک. قانی، م. مهدوی. سنتز نانوساختار هیدروکسید الیهای دوگانه روی-آلومینیم و بررسی اثر آن بر بازدهی سلول خورشیدی پروسکایتی. نشریه علمی علوم و فناوری رنگ. (۱۳۹۷) ۲۶۹،۱۲-۲۶۱
11
J. Peng, X. Xu, X. J. Feng, L. Li, Fabrication of solution-processed pure blue fluorescent OLED using exciplex host. J. Lumin. 198(2018), 19-23.
12
A. B. Chwang, R. C. Kwong, J. J. Brown, Graded mixed-layer organic light-emitting devices. Appl. Phys. Lett. 80(2002) 725.
13
M. Janghouri, M. M. Amini, Effect of zinc oxide doping on electroluminescence and electrical behavior of metalloporphyrins-doped samarium complex. J. Electron. Mater. 47 (2018), 2761-2767.
14
L. J. Zhua, J. Wanga, T. G. Renga, C. Y. Li, D. C. Guoa and C. C. Guoa, Effect of substituent groups of porphyrins on the electroluminescent properties of porphyrin‐doped OLED devices. J. Phys. Org. Chem. 23(2010), 190.
15
ن. نصیریزاده، م. دهقانی، س. جعفری، تخریب ماده رنگزای بازیک قرمز 13 با فرآیند ترکیبی سونوالکتروشیمی در حضور نانوذرات TiO2. نشریه علمی علوم و فناوری رنگ. (۱۳۹۵)۱۰، ۱۴۴-۱۳۷.
16
F. A. Angel, J. U. Wallace, C. W. Tang, Effect of lithium and silver diffusion in single-stack and tandem OLED devices. Org. Electron. 42(2017), 102-106.
17
J. Zhao, X. Du, S. Yuan, C. Zheng, H. Lin, S. Tao, Highly efficient green and red OLEDs based on a new exciplex system with simple structures. Org. Electron. 43(2017), 136-141.
18
م. حسین نژاد، س. مرادیان، ک. قرنجیگ، مروری بر سلولهای خورشیدی دوپشته حساسشده به مواد رنگزا. نشریه علمی علوم و فناوری رنگ. (۱۳۹۵)۴، ۷۵-۸۲.
19
M. Jafari, Bahram Bahrami, Emission properties of porphyrin compounds in new polymeric PS:CBP host. Appl. Phys. A. 119 (2015) 1491–1497.
20
J. Hu, S. Hu, C. Lu, Y. Huang, K. Xu, X. Wang, Assistant dopant system in red phosphorescent OLEDs and its mechanism reveal. J. Lumin. 197(2018), 187-192.
21
C. T. Chen, Evolution of red organic light-emitting diodes: materials and devices. Chem. Mater. 16(2004), 4389-4400.
22
Q. Ran, Y. L. Zhang, X. Hua, M. K. Fung, L. S. Liao, J. Fan, Modulation of p-type units in tripodal bipolar hosts towards highly efficient red phosphorescent OLEDs. Dyes Pigm. 162(2019), 632-639.
23
M Janghouri, E Mohajerani, H Hosseni, Improved electro-optical performance of oleds using pdco alloy nanoparticles supported on polypropylenimine dendrimer–grafted graphene. J Inorg Organomet Polym. 28 (2018), 783-789.
24
Z. Shahedi, M. Reza Jafari, Synthesis Al complex and investigating effect of doped ZnO nanoparticles in the electrical and optical efficiency of OLEDS. Appl. Phys. A. 123 (2017) 98.
25
Z. Abedi, M. Janghouri, E. Mohajerani, M. Alahbakhshi, A. Azari, A. Fallahi, Study of various evaporation rates of the mixture of Alq3: DCM in a single furnace crucible. J. Lumin. 147(2014), 9-14.
26
M. Janghouri, E. Mohajerani, A. Khabazi, Z. Abedi, H. Razavi, Effect of doping different dyes in Alq3 on electroluminescence and morphology of layers using single furnace Method. J.Lumin. 140(2013), 7-13.
27
A. D. Adler, F. K. Longo, J. A. Finarelli, A simplified synthesis for meso-tetraphenylporphine. J. Org. Chem. 32(1976), 476-476.
28
A. D. Adler, F. R Longo, W. Shergalis. Mechanistic investigations of porphyrin syntheses. I. preliminary studies on ms-tetraphenylporphin. J. Am. Chem. Soc. 863(1964), 3145-3149.
29
M. D. Galanin, Luminescence of molecules and crystals, cambridge international science publishing, cambridge, 1996. 69.
30
D. Moses, High quantum efficiency luminescence from a conducting polymer in solution: A novel polymer laser dye. Appl. Phys. Lett. 51(2014), 0881.
31
Y. F. Chang, C. H. Yu, S. C. Yang, I. H. Hong, S. C. Jiang, H. F. Meng, H. L. Huang, H. W. Zan, S. F. Horng, Great improvement of operation-lifetime for all-solution OLEDs with mixed hosts by blade coating. Org. Electron. 42(2017), 75-86.
32
X. Huixia, W. Fang, W. Kexiang, M. Yanqin, L. Jie, Z. Jing, W. Hua, H. Yuying, X.Bingshe, Three acceptors based bipolar materials with tunable excited state natures and applications as non-doped blue emitters and hosts in OLEDs. Dyes Pigm. 155(2018), 84-92.
33
R. Braveenth, H. W. Bae, I. J. Ko, W. Qiong, Q. P. B. Nguyen, P. G. S. Jayashantha, J. H. Kwon, K. Y. Chai, Thermally stable efficient hole transporting materials based on carbazole and triphenylamine core for red phosphorescent OLEDs. Org. Electron. 51(2017), 463-470.
34
Y. Y. Ma, X. C. Hua, T. S. Zhai, Y. H. Li, X. Lu, S. Duhm, M.K. Fung, Doped copper phthalocyanine via an aqueous solution process for high-performance organic light-emitting diodes. Org. Electron. 68(2019), 236-241.
35
M. G. Helander, Z. B. Wang, J. Qiu, M. T. Greiner, D. P. Puzzo, Z. W. Liu, Z. H. Lu, Chlorinated indium tin oxide electrodes with high work function for organic device compatibility. Sci. 332(2011), 944-947.
36
M. Zhu, C. Yang, Blue fluorescent emitters: design tactics and applications in organic light-emitting diodes. Chem. Soc. Rev. 12(2013), 4963-4976
37