@article { author = {Nabizadeh Chianeh, F. and Basiri Parsa, J.}, title = {Removal of Azo Dye Using MWCNTs/Ti and MWCNTs-TiO2/Ti Anodes}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {79-90}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The main objective in this research was application of Electrophoretic deposition (EPD) method for modification and coating of titanium electrodes with nano materials and their application for removal of Acid Red 33 (AR33) dye , by using electrocatalysis and photoelectrocatalysis processes. In this paper the titanium electrodes coated with multiwall carbon nanotubes (MWCNTs/Ti) and multiwall carbon nanotubes – titanium dioxide composite (MWCNTs-TiO2/Ti) were prepared by the electrophoretic deposition (EPD) method. The evaluation of efficiency of prepared MWCNTs/Ti anode for removal of AR33 indicated that high decolorization efficiency (90%) was achieved for dye concentration of 30 mg/L, using a current density of 5.5 mA cm-2 , NaCl 1g/L and pH=10 for 60 min. Also, photoelectrocatalysis (PEC) activity of MWCNTs-TiO2 composite electrode was investigated through the degradation of AR33 as a model pollutant. 98% of decolorization efficiency and 41.66% of mineralization for AR33 dye were achieved after 60 min of photoelectrocatalytic treatment using the MWCNTs-TiO2/Ti composite electrode at a current density of 7.5 mA cm−2 , dye concentration of 30 mg/L and pH=5.2.}, keywords = {Electrophoretic deposition,MWCNTs/Ti,MWCNTs-TiO2/Ti,Acid Red 33}, title_fa = {حذف ماده رنگزای آزو با استفاده از آندهای MWCNTs/Ti و MWCNTs-TiO2/Ti}, abstract_fa = {هدف اصلی این تحقیق کاربرد روش لایه‌نشانی الکتروفورتیک (EPD) برای اصلاح الکترودهای بر پایه تیتانیم با نانو مواد و استفاده از آنها برای حذف ماده رنگزای اسید قرمز 33(AR33)، با استفاده از فرآیندهای الکترولیز و فتوالکتروکاتالیست می‌باشد. در این مقاله، الکترودهای تیتانیم با نانو لوله‌های کربنی چند دیواره ((MWCNTs/Ti)، کامپوزیت نانو لوله‌های کربنی چند دیواره - دی اکسید تیتانیم (MWCNTs-TiO2/Ti) با روش لایه نشانی الکتروفورتیک تهیه شدند. کارایی آند MWCNTs/Ti برای حذف ماده رنگزای AR33 ارزیابی شد و بازده بالایی برای حذف mg/l 30 ماده رنگزای AR33 (90%) با استفاده از چگالی جریان mA/cm2 5/5، غلظت g/l 1 کلرید سدیم و 10=pH در مدت زمان 60 دقیقه بدست آمد. همچنین، فعالیت الکتروکاتالیستی MWCNTs-TiO2/Ti از طریق تخریب AR33 به عنوان آلاینده نمونه بررسی شد. 98% حذف رنگبری و 41.66% معدنی‌سازی ماده رنگزا بعد از 60 دقیقه تصفیه فوتوالکتروکاتالیستی با الکترود MWCNTs-TiO2/Ti، چگالی جریان mA/cm2 7.5، mg/l 30 ماده رنگزا و 5.2=pH به دست آمد.}, keywords_fa = {لایه‌نشانی الکتروفورتیک,MWCNTs/Ti,MWCNTs,TiO2/Ti,اسید قرمز 33}, url = {https://jcst.icrc.ac.ir/article_76213.html}, eprint = {https://jcst.icrc.ac.ir/article_76213_69da641abda1967f78b227026559dfc7.pdf} } @article { author = {Ershadi Afshar, L. and Chaibakhsh, N. and Moradi-Shoeili, Z.}, title = {Optimization of Fenton Advanced Oxidation Process for Decolorization of Dye-Containing Wastewater by Copper Ferrite Nanocatalyst}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {91-98}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, the effects of three parameters including reaction time, H2O2 concentration, and catalyst loading on the decolorization of methyl orange by synthesized copper ferrite nanocatalyst have been studied. In order to optimize the decolorization efficiency, response surface methodology (RSM) based on Box–Behnken design (BBD) was employed. Optimum condition for decolorization of methyl orange solution with concentration of 50 mg/l was obtained at 109.26 min, H2O2 concentration of 24.42 mmol/l, and catalyst loading of 49.88 mg/l. The results showed that at the optimum conditions, a decolorization of more than 95% can be obtained.The synthesized Fenton nanoparticles are efficient catalysts for the treatment of industrial wastewaters containing azo dyes such as methyl orange.}, keywords = {Methyl Orange,Advanced oxidation,nanocatalyst,Fenton,optimization,Decolorization}, title_fa = {بهینه‌سازی فرآیند اکسایش پیشرفته فنتون برای رنگ‌زدایی پساب حاوی ماده رنگزا با استفاده از نانوکاتالیزگر فریت مس}, abstract_fa = {در این تحقیق، تاثیر سه عامل زمان، غلظت هیدروژن پراکسید و مقدار نانوکاتالیزگر فریت مس(CuFe2O4) سنتز شده بر روی حذف ماده رنگزای نارنجی متیل مورد مطالعه قرار گرفت. برای بهینه‌سازی بازده حذف ماده رنگزا از روش سطح پاسخ بر اساس طراحی Box-Behnken استفاده شد. شرایط بهینه برای حذف ماده رنگزای نارنجی متیل با غلظت mg/l 50 در زمان 109.26 دقیقه، با غلظت هیدروژن پراکسید 24.42 میلی‌مولار و مقدار کاتالیزگر 49.88 میلی‌گرم بدست آمد. نتایج نشان داد که در شرایط بهینه، حذف ماده رنگزا تا بیش از 95% می‌تواند حاصل شود. نانوذرات فنتونی حاصل، کاتالیزگرهای مؤثری در تصفیه پساب‌های صنعتی حاوی مواد رنگزای آزو مانند نارنجی متیل هستند.}, keywords_fa = {نارنجی متیل,اکسایش پیشرفته,نانوکاتالیزگر,فنتون,بهینه‌سازی,رنگبری}, url = {https://jcst.icrc.ac.ir/article_76214.html}, eprint = {https://jcst.icrc.ac.ir/article_76214_e615fe659fd50bfe4564dec41791aa61.pdf} } @article { author = {Ansari, R. and Alvanpour, N. and Ostovar, F.}, title = {Adsorption Removal of Congo Red Using Copper Oxide / Sawdust Nanocomposite in Column System}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {99-111}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, CuO nano-particles composite with sawdust as a cellulose bed (termed as CuO/SD NC) were prepared via chemical precipitation and then were used for removal of Congo red dye as a typical anionic dye (termed as CR) from aqueous solutions. Surface characterisation of the nanomaterial adsorbents was carried out by X-ray Diffraction (XRD) and scaning electron microscopy (SEM) techniques. Adsorption studies were conducted by CuO/SD nanocomposite in a fixed-bed column system. In order to find out removal optimisation conditions in column adsorption experiments, the effects of several parameters, such as pH, initial dye concentration, flow rate, and bed depth on the sorption of Congo red dye were studied. When the feedstock pH reduction, the volume of breakthrough curves increased and Congo red dye natural pH value equal 5 was chosen as the optimal pH. By reducing the solution dye flow rate and increasing adsorbent bed height, due to increased contact time and adsorbent surface available, the breakthrough curves volume increased and higher absorption capacity occurs. Varios kinetic models such as Thomas, Adams-Bohart and BDST kinetic model were applied in order to obtain colum adsorption performance. Thomas model shows good agreement in the column design that indicates the process follows the Langmuir adsorption kinetics, adsorption process was one layer and the maximum absorption capacity of the absorbent was obtained 28.4 mg/g. At the end in order to find out the possible frequent use of adsorbent in column system, desorption and regeneration investigation was also studied.}, keywords = {CuO/SD nanocomposite,Adsorption,Congo red,Column system}, title_fa = {حذف جذبی ماده رنگزای کنگو قرمز با نانوکامپوزیت اکسید مس/خاک اره در سیستم ستونی}, abstract_fa = {در این پژوهش، ابتدا کامپوزیت نانو ذرات CuO با خاک اره (CuO/SD) به عنوان بستر سلولزی، از طریق رسوب‌دهی شیمیایی تهیه و سپس برای حذف ماده رنگزای کنگو قرمز (CR) به عنوان نمونه‌ای از مواد رنگزای آنیونی استفاده شد. برای تعیین ساختار نانو جاذب تهیه شده، از روش‌هایی نظیر پراش پرتو ایکس (XRD) و میکروسکوپ الکترونی روبشی (SEM)استفاده شد. مطالعات جذب در سیستم غیرتعادلی یا ستونی انجام گرفت. برای تعیین کارایی نانو‌کامپوزیت تهیه شده در سیستم ستونی، تاثیر چندین عامل مانند pH، غلظت اولیه، سرعت جریان و عمق بستر (ارتفاع ستون) بر روی جذب مطالعه شد. کاهش pH خوراک اولیه، سبب افزایش حجم نقطه شکست منحنی شده و pH طبیعی محلول ماده رنگزای کنگو قرمز با مقدار 5 به عنوان pH بهینه انتخاب گردید. با کاهش سرعت جریان و افزایش ارتفاع بستر، به دلیل افزایش زمان تماس و سطح جاذب در دسترس، نقطه شکت منحنی در حجم بیشتر و ظرفیت جذب بالاتر اتفاق می افتد. با کاهش غلظت اولیه ماده رنگزا نیز، حجم نقطه شکست افزایش و ظرفیت جذب آن کاهش یافت. از مدل‌های سینتیکی مختلف نظیر مدل ریاضی توماس، آدامس- بوهارت و BDST برای ارزیابی سیستم جذبی در ستون استفاده شد. تطابق خوب مدل توماس در طراحی ستون نشان می دهد که فرآیند جذب از سینتیک لانگمویر پیروی می‌کند، جذب صورت گرفته تک‌لایه بوده و جاذب دارای حداکثر ظرفیت جذب برابر mg/g 28.4 می‌باشد. در خاتمه برای تعیین امکان کاربرد نانوکامپوزیت برای استفاده‌های مکرر، مطالعات واجذب و احیای ستون انجام شد.}, keywords_fa = {نانو کامپوزیت CuO/SD,جذب سطحی,کنگو قرمز,سیستم ستونی}, url = {https://jcst.icrc.ac.ir/article_76215.html}, eprint = {https://jcst.icrc.ac.ir/article_76215_a550a1da753c518d6f519bf44a6d7382.pdf} } @article { author = {صالحی, محمد مهدی and Ataeefard, M. and Moradian, S.}, title = {Printability Comparison of Several Types of LDPE Treated by Plasma and Corona}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {113-120}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The adhesion is defined as attraction between the ink and substrate. For good wetting characteristics and consequently achieve acceptable adhesion between the polymer surface and ink, the surface energy of polymeric substrates, is one of the critical parameters and Surface energy of the substrate should be higher than the surface tension of the ink. Despite the sound features of low density polyethylene polymers which make it suited for used in the many industries like packaging, low surface energy of this polymer caused problems with printing on this polymer. Thus, many methods are utilized to improve the printability of this polymer. The objective of this study is in investigating the printability of low density polyethylene after using two methods of treatment; plasma and corona behalf. Contact angle, adhesion tape tests, AFM, SEM was used to determine the quality of provision. Results indicated a better performance of plasma treatment in comparison with corona, both in terms of initial adhesion and durability of this adhesion.}, keywords = {Low density polyethylene,Packaging,Printing,corona,Plasma}, title_fa = {مقایسه چاپ‌پذیری انواع مختلف پلی‌اتیلن سبک به روش پلاسما و کرونا}, abstract_fa = {چسبندگی به عنوان وجود کشش و جاذبه بین مرکب و زیرآیند تعریف می‌شود. برای داشتن خصوصیات ترشوندگی مناسب و در نتیجه حصول چسبندگی قابل قبول بین سطح پلیمر و مرکب اعمال شده بر روی آن، انرژی سطحی فیلم پلیمری، یکی از مشخصه‌های بحرانی محسوب می‌شود و انرژی سطحی فیلم معمولا باید بالاتر از کشش سطحی مرکب باشد. برخلاف ویژگی‌های فنی مناسب پلی‌اتیلن سبک به عنوان یکی از پرمصرف‌ترین پلیمرهای مورد استفاده در صنایع بسته‌بندی، پایین بودن انرژی سطحی این پلیمر سبب گردیده تا عملیات چاپ بر روی سطح فیلم‌های بسته‌بندی برپایه این پلیمرها با مشکلاتی روبرو گردد. بنابراین روش‌های متعددی برای آماده‌سازی این پلیمر به کار گرفته شده است. در این تحقیق قابلیت آماده‌سازی دو روش پلاسما و کرونا مورد مقایسه قرار می‌گیرد. از آزمون‌های اندازه‌گیری زاویه تماس، طیف‌سنجی ATR- FT-IR، SEM، AFM و آزمون چسبندگی نواری برای بررسی کیفیت آماده‌سازی استفاده شد. نتایج به دست آمده حکایت از کارایی بهتر روش پلاسما در مقایسه با روش کرونا هم از نظر میزان چسبندگی اولیه و هم دوام این چسبندگی دارد.}, keywords_fa = {پلی‌اتیلن سبک,بسته‌بندی,چاپ,آماده‌سازی,کرونا,پلاسما}, url = {https://jcst.icrc.ac.ir/article_76216.html}, eprint = {https://jcst.icrc.ac.ir/article_76216_daefb8348fcb858c3b8abbc80a600334.pdf} } @article { author = {Samanian, K. and Abbasian, H. and Abbasi, Z.}, title = {Technical Study of The Materials in Three Tablout Atrrributed to Jafar-E-Chehrehnegar, in the Museum of the Iranian Islamic Parliament}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {121-136}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Pahlavi Period has a special feature in the history of art in Iran. Due to the influence of Westerns art and culture during this period, paintings and art are greatly influenced. The influence of Western art was begining from long ago of the Safavid dynasty, which reached its peak in Qajar and Pahlavi period. This paper attempts to identify the materials used in Pahlavi easel paintings. For this purpose, the boards portrait Hassan Esfandiari , portrait of Muhammad Ali Foroughi and Mahmoud Ehteshamosaltaneh portrait from paintings collection of Jafar-e-Chehrehnegar, in the Museum of the Iranian Islamic Parliament will be used as a case study.Techniques for analyzing PLM, FT-IR, SEM-EDS, XRF, as well as historical studies, basic procedures the identification of pigments and fibers are used in the painting. According to the results of the analysis carried out, the artist used white lead, zinc white, calcite white, yellow ochre, iron oxide, red ochre, ultramaryn, ,Indigo Blue, under the influence of artistic periods before Pahlavi in Iran. And used titanium white, green chrome, yellow zinc and lead chromate yellow and red, Prussian blue, under the impact of foreign artists and new materials have been imported. The fibers used for making canvas painting: canvas was diagnosed.}, keywords = {Easel painings,Jafar-e-chehrehnegar,Pigments,PLM,XRF,FT-IR,SEM-EDS}, title_fa = {مطالعه فن‌شناسی پالت رنگ آثار نقاشی سه‌پایه‌ای جعفر چهره‌نگار در موزه مجلس شورای اسلامی}, abstract_fa = {دوره پهلوی (1375-1304 ه.ش) در تاریخ هنر ایران از ویژگی‌های خاصی برخوردار است. به دلیل نفوذ فرهنگ و هنر غربی در این دوره، هنر و آثار نقاشان ایران به شدت تحت تأثیر هنر و فرهنگ غرب قرار می‌گیرد. این تأثیر و نفوذ هنر غربی از مدت‌ها قبل یعنی در دوره صفوی آغاز گردیده بود که در دوره قاجار و پهلوی به اوج خود می‌رسد. مطالعات زیادی در رابطه با روش و مواد مورد استفاده در نقاشی‌های دوره صفوی و قاجار انجام گردیده است اما در رابطه با مواد مورد استفاده در نقاشی‌های دوره پهلوی مطالعات کمی صورت پذیرفته است. این مقاله سعی در بررسی مواد، مصالح و روش‌های به کار رفته و همچنین بررسی تأثیر فرهنگ و هنر غربی در تابلوهای پرترۀ حسن اسفندیاری، محمدعلی فروغی و محمود احتشام‌السلطنه از مجموعه نقاشی‌های جعفر چهره‌نگار (یکی از هنرمندان دوره پهلوی) در موزه مجلس شورای اسلامی را دارد. روش‌های تجزیه و تحلیل PLM، FT-IR، SEM-EDS و XRF به علاوه مطالعات تاریخی، روش‌های بنیانی در شناسایی رنگدانه‌ها و الیاف مورد استفاده در این تابلوها می‌باشند. با توجه به نتایج و تحلیل‌های انجام شده، رنگدانه‌های سفید سرب، سفید روی، سفید کلسیت، زرد اکر، اکسید آهن، قرمز اخرا، لاجورد و نیل مورد استفاده چهره‌نگار در تابلوهای بررسی شده در این تحقیق، تحت تأثیر دوره‌های هنری پیش از پهلوی در ایران می‌باشد. همچنین استفاده از سفید تیتانیم، سبز کروم، زرد روی، کرومات سرب زرد رنگ و قرمز رنگ و آبی پروس در این تابلو‌ها، به تأثیر از هنرمندان خارجی و مواد وارداتی جدید بوده است. همچنین الیاف مورد استفاده برای بوم‌سازی تابلو کتان تشخیص داده شد.}, keywords_fa = {نقاشی سه‌پایه‌ای,جعفر چهره‌نگار,رنگدانه,PLM,XRF,FT,IR,SEM,EDS}, url = {https://jcst.icrc.ac.ir/article_76217.html}, eprint = {https://jcst.icrc.ac.ir/article_76217_f0e91292c4803faffe4cab499fb59dac.pdf} } @article { author = {Zare Fekri, L. and Nikpassand, M.}, title = {Synthesis of Azo-Linked Bis Coumarinyl Methanes Using [DBU] OAc Ionic Liquid at Room Temperature}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {137-143}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {An environmentally benign, effective, new and simple protocol for the synthesis of azo-Linked bis coumarinyl methanes by a nucleophilic addition reaction of synthesized aldehyde and two equivalents of 4-hydroxy coumarins in the presence of 2,3,4,6,7,8,9,10-octahydropyrimido[1,2-a]azepin-1-ium acetate ([DBU]OAc) as a ionic liquid under stirring in room temperature was reported. All reactions are performed in the absence of solvent in high to excellent yield during short reaction times. Further, the ionic liquid can be reused and recovered for several times without loss of activity. This work consistently has the other advantages such as mild reaction condition and simple work-up procedures. There are ten derivatives of azo-linked bis coumarinyl methanes were synthetized. All of synthesized compounds were characterized by IR, 1H NMR, 13C NMR spectroscopy and elemental analysis.}, keywords = {Coumarin,Nucleophilic reaction,Ionic Liquid,Room temperature}, title_fa = {سنتز بیس کومارینیل متان‌های دارای اتصال آزو با استفاده از مایع یونی [DBU]OAc و در دمای اتاق}, abstract_fa = {در این پژوهش، یک روش ساده، جدید، موثر و دوست‌دار محیط‌زیست برای تهیه بیس کومارینیل متان‌های دارای اتصال آزو ارائه شده است. این واکنش، طی حمله هسته دوستی دو هم ارز از 4-هیدروکسی کومارین با یک هم ارز از آلدهیدهای مصنوعی دارای اتصال آزو انجام شد. این واکنش‌ها در مایع یونی10،9،8،7،6،4،3،2-اکتا هیدروپیریمیدو]2،1-[a ازپین-1-اوم استات ([DBU]OAc) و طی هم زدن در دمای اتاق انجام شد. همه این واکنش‌ها در غیاب حلال، با بازده بالا و زمان واکنش کم، انجام شد. همچنین، مایع یونی مورد نظر، قابل بازیافت مجدد بوده و تا چندین بار، بدون کاهش فعالیت، مورد استفاده قرار گرفت. از مزایای دیگر این کار پژوهشی، شرایط ملایم انجام واکنش و سادگی روند جداسازی محصول است. در این کار تحقیقاتی، ده مشتق از بیس کومارینیل متان‌های دارای اتصال آزو سنتز شد. ساختار همه ترکیبات با طیف‌سنجیFT-IR ،1HNMR ،13CNMR و آنالیز عنصری تعیین شد.}, keywords_fa = {کومارین,واکنش هسته دوستی,مایع یونی,دمای اتاق}, url = {https://jcst.icrc.ac.ir/article_76218.html}, eprint = {https://jcst.icrc.ac.ir/article_76218_e58c522d199352d70840329ad8ff3146.pdf} } @article { author = {مهدوی زفرقندی, فرزانه and Amoozegar, M. A. and Asad, S. and Siroosi, M.}, title = {Evaluation of Biological Decolorization of the Textile Azo-Dyes by Halophilic and Halotolerant Actinomycetes}, journal = {Journal of Color Science and Technology}, volume = {11}, number = {2}, pages = {145-152}, year = {2017}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The aim of the present study was to isolate halophilic and halotolerant Actinomycetes with azo dye decolorization ability. To this purpose, different strains of halophilic and halotolerant Actinomycetes isolated from effluent of a textile industry and those received from microbial bank of IBRC were screened on the Remazol Black B for finding dye decolorizing ones. Two strains, M18 and M77, revealed the best decolorization results and effect of different factors including NaCl (0-15%), Temperature (25-40 °C), and pH (5-11) in static condition on their decolorization ability were studied. The best decolorization results on Remazol by Black B by M18 and M77 were at 12.5 and 2.5-10%, pH values of 7-9, and temperatures of 35 and 40 °C, respectively. According to the ability of strains to decolorize the mixed azo dyes, they can be good options for degrading azo dyes in textile effluents.}, keywords = {Azo-dyes,Halophilic and Halotolerant Actinomycetes,Decolorization}, title_fa = {بررسی رنگبری زیستی مواد رنگزای آزو توسط اکتینومیست‌های نمک‌دوست و تحمل‌پذیر نمک}, abstract_fa = {هدف این مطالعه جدا کردن اکتینومیست‌های نمک‌دوست و تحمل‌پذیر نمک با توانایی رنگبری از مواد رنگزای آزو است. به این منظور، اکتینومیست‌های نمک‌دوست و تحمل‌پذیر نمک جدا شده از پساب کارخانه نساجی مرینوس قم و دریافت شده از مرکز ذخایر ژنتیکی زیستی ایران، با توجه به توانایی رنگبری از ماده رنگزای آزوی Remazol Black B مورد غربالگری قرار گرفتند و سویه‌های M18 و M77 بیشترین رنگبری را نشان دادند. توانایی رنگبری از ماده رنگزای Remazol Black B توسط این دو سویه در حضور نمک سدیم‌کلراید (0تا 15%)، pH (11-5)، محدود دمایی (C 40-25) در شرایط ایستا مورد بررسی قرار گرفت. بهترین درصد رنگبری برای سویه‌های M18 و M77 به ترتیب در محدوده نمک 12.5 (60%) و 10-2.5 % (70%-60)، pH بین 7 تا 9 (70% در مورد سویهM18 و 65% در مورد سویهM77 ) و دمای 35 (70%) و C° 40 (68%) مشاهده شد. این دو سویه گزینه‌های مناسبی برای کاربرد عملی در تصفیه پساب‌های آلوده به مواد رنگزا هستند.}, keywords_fa = {مواد رنگزای آزو,اکتینومیست‌های نمک دوست وتحمل‌پذیر نمک,رنگبری}, url = {https://jcst.icrc.ac.ir/article_76219.html}, eprint = {https://jcst.icrc.ac.ir/article_76219_9bac42c2ba165d5a0cf4517daa42a5bd.pdf} }