@article { author = {Keramatinia, M. and Najafi, F. and Saeb, Mohammad Reza}, title = {Study on Adhesion Properties of UV-Curable Epoxy Methacrylate Coatings Modified By Hyperbranched Polyamidoamine Acrylate}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {207-215}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, hyperbranched polyamidoamine with amine end groups was reacted with glycidyl methacrylate to produce a hyperbranched polymer ended in acrylate functional units. Chemical structure and molecular weight of produced molecule were proved by FTIR, 1H NMR, and GPC analyses. Different amounts of yielded acrylate structure was added to coatings based on epoxy methacrylate to monitor the effect of polymer on adhesion properties of UV-cured coatings. The results of DMTA analysis revealed that Tg of samples containing hyperbranched polymer was 8 °C lower than that of blank sample, indicating flexibility of obtained coatings. Eventually, adhesion test manifested improvement in adhesion of coatings containing acrylate coatings, so that sample contained 10 wt.% of this additive showed 37% increase in adhesion level.}, keywords = {Hyperbranched polymer,Glycidyl methacrylate,UV curable coatings,Adhesion}, title_fa = {مطالعه خواص چسبندگی پوشش‌های اپوکسی متاکریلات تابش‌پز اصلاح شده توسط پلی‌آمیدوآمین پرشاخه اکریلاتی}, abstract_fa = {در این تحقیق، پلیمر پرشاخه پلی آمیدوآمین با گروه‌های انتهایی آمین توسط مونومر گلیسیدیل متاکریلات به پلیمری پرشاخه با گروه‌های انتهایی اکریلاتی تبدیل شد. ساختار شیمیایی به دست آمده و وزن مولکولی آن به ترتیب توسط آزمون‌های FT-IR،HNMR و GPCتایید شده‌اند. به منظور بررسی اثر افزودن این پلیمر بر خواص چسبندگی پوشش‌های تابش‌پز، درصدهای مختلفی از آن وارد فرمولاسیون پوشش‌های حاوی اپوکسی متاکریلات شد. نتایج حاصل از آزمون DMTA نشان داد که کاهش دمای Tgدر نمونه حاوی پلیمر پرشاخه نسبت به نمونه اولیه به مقدار 8 درجه سانتی‌گراد، حاکی از به دست آمدن پوشش‌هایی انعطاف‌پذیر بوده است. در نهایت آزمون چسبندگی، بهبود چسبندگی پوشش‌های حاوی پلیمر پرشاخه اکریلاتی نسبت به پوشش‌های اپوکسی متاکریلات را نشان داد، به طوری که برای نمونه حاوی 10 درصد از این افزودنی، چسبندگی در حدود 37 درصد افزایش یافته است.}, keywords_fa = {پلیمر پرشاخه,گلیسیدیل متاکریلات,پوشش‌های تابش‌پز,چسبندگی}, url = {https://jcst.icrc.ac.ir/article_76199.html}, eprint = {https://jcst.icrc.ac.ir/article_76199_d660924284e75037496643f99a40c292.pdf} } @article { author = {دوست محمدی, سهیلا and Safapour, S. and Sadeghi-Kiakhani, M.}, title = {Study on Dyeing and Fastness Properties of Chitosan-Cyanuric Chloride Modified Woolen Yarn Used in Hand-Knotted Carpet With Madder Dye}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {217-224}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The aim of present study was to investigate dyeing and fastness properties of chitosan-cyanuric chloride hybrid (Ch-Cy) modified woolen yarn with madder natural dye which is used in hand-knotted carpet pile. Modified yarns were dyed with madder root natural dye and the impacts of some important factors such as Ch-Cy concentration, madder dye concentration, pH, temperature, and time of dyeing were investigated. Optimum dyeing results were obtained using 2%owf of Ch-Cy, 100%owf of madder dye, dyeing pH=7, temperature of 100 ˚C, and time of 60 min. Results revealed that Ch-Cy was effective in the improvement of dyeing properties of woolen yarns, so that the dye exhaustion and color strength values increased by 7% and 2 ratings, respectively. Fastness data against wash, light, and rub as well as colorimetric data indicated that wool modification did not impair color fastness of dyed substrates. Further, hue remained nearly unchanged compared to dyed pristine wool. Therefore, based on the results obtained, it was concluded that modification of woolen yarns with Ch-Cy resulted in better dyeing performance, deeper shades, and saving crude dye material in madder dyeing of wool.}, keywords = {Woolen yarn,Chitosan-cyanuric chloride,Modification,Madder dye,dyeing}, title_fa = {مطالعه خصوصیات رنگی و ثباتی نخ پشمی اصلاح‌شده با کیتوسان– سیانوریک کلراید مورد مصرف در فرش دستباف با ماده رنگزای روناس}, abstract_fa = {هدف از این مطالعه، بررسی خصوصیات رنگی و ثباتی نخ پشمی اصلاح‌شده با ترکیب کیتوسان-سیانوریک کلراید (Ch-Cy) با ماده رنگزای طبیعی روناس که در خامه فرش دستباف مصرف می‌شود، است. نخ‌های اصلاح شده با ماده رنگزای طبیعی روناس رنگرزی شد و تأثیر عواملی نظیر غلظت Ch-Cy، غلظت ماده رنگزا، pH، دما و زمان رنگرزی مورد بررسی قرار گرفت. شرایط بهینه رنگرزی با مقدار 2 درصد ترکیب Ch-Cy نسبت به وزن پشم، 100 درصد ماده رنگزای روناس نسبت به وزن پشم، pH رنگرزی 7، دمای 100 درجه سانتی‌گراد و زمان رنگرزی60 دقیقه به دست آمد. نتایج نشان داد که اصلاح با Ch-Cy موجب بهبود خواص رنگرزی پشم شد و رمق‌کشی به میزان 7 درصد و قدرت رنگی (K/S) به میزان 2 واحد افزایش یافت. داده‌های رنگی و مقادیر ثبات‌های شستشویی، نوری و مالشی نشان داد که اصلاح نخ پشمی، تأثیر منفی بر ثبات‌های رنگی نداشت و فام کالای رنگرزی شده بدون تغییر باقی ماند. نتایج این پژوهش نشان داد که اصلاح پشم با ترکیب Ch-Cy منجر به نتایج بهتر رنگرزی، شیدهای عمیق‌تر و صرفه‌جویی در مصرف ماده رنگزا در رنگرزی با ماده رنگزای روناس می‌گردد.}, keywords_fa = {نخ پشمی,کیتوسان,سیانوریک کلراید,اصلاح,ماده رنگزای روناس,رنگرزی}, url = {https://jcst.icrc.ac.ir/article_76200.html}, eprint = {https://jcst.icrc.ac.ir/article_76200_8d9dbc0301127f556cd43b9ace4bf8c9.pdf} } @article { author = {Gharagozlou, M. and Naghibi, S.}, title = {Synthesis of ZnO Nanoparticles from N-Sulfosalicylidene Glycinato Ligand Via Green Chemistry Method}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {225-232}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Application of the green chemistry in preparation of nanomaterials has been developed and replaced instead of toxic solvents and reagents. ZnO nanoparticles have been synthesized via a novel green chemistry method using a water soluble N-sulfosalicylidene glycinato ligand. For this purpose, the inorganic complex, Zn/N-sulfosalicylideneglycinato water soluble ligand has been prepared by the condensation reaction of glycine amino acid with sulfosalicylaldehyde in the presence of zinc salt. Then ZnO nanoparticles have been synthesized by the thermal decomposition of inorganic complex precursor at temperatures of 400, 500 and 600 °C. The products were characterized by XRD, PL spectroscopy, UV-vis spectroscopy, STA, FT-IR, SEM and TEM. The results confirmed that ZnO nanoparticles were synthesized in water based medium, in the wurtzite phase and spherical morphology with the average particle size of 35-45 nm. The band gap energy was achieved about 3.2 which is 0.17 units less than that of the bulk ZnO.}, keywords = {ZnO nanoparticles,Green chemistry method,N-sulfosalicylidene glycinato,Thermal decomposition}, title_fa = {فرآوری نانوذرات اکسید روی از لیگاند N ـ سولفوسالیسیدین گلایسیناتو به روش شیمی سبز}, abstract_fa = {استفاده از روش‌های شیمی سبز در فرآوری نانومواد به سرعت در حال رشد بوده و جایگزین روش‌های مبتنی بر حلال‌ها و واکنش‌گرهای سمی خواهد شد. در این تحقیق نانوذرات اکسید روی به روش نوین شیمی سبز با استفاده از لیگاند محلول در آب N-سولفوسالیسیدین گلایسیناتو سنتز و مشخصه‌یابی شدند. برای این منظور ابتدا کمپلکس معدنی روی (II) و N-سولفوسالیسیدین گلایسیناتو از تراکم اسیدآمینه گلایسین با سولفوسالیسیل آلدهید در حضور نمک روی تهیه شد. سپس از تخریب حرارتی کمپلکس حاصله در دماهای 400، 500 و 600 درجه سانتی‌گراد، نانوذرات اکسیدروی سنتز شدند. مشخصه‌یابی با استفاده از XRD، PL، طیف‌سنجی UV-vis، STA، FT-IR، SEM و TEM انجام شد. نتایج نشان داد نانوذرات بصورت ترکیب تک فاز ورتزیت با ساختار کروی و ذراتی با محدوده اندازه nm 45-35 در بستر آب سنتز شدند. گاف انرژی ذرات 3.20 الکترون ولت بود که در مقایسه با اکسید روی استاندارد 0.17 واحد کمتر است.}, keywords_fa = {نانوذرات اکسید روی,روش شیمی سبز,سولفوسالیسیدین گلایسیناتو,تخریب حرارتی}, url = {https://jcst.icrc.ac.ir/article_76201.html}, eprint = {https://jcst.icrc.ac.ir/article_76201_464d1b25b3c750f1ea24d5471a7548e9.pdf} } @article { author = {Rostami, M. and Amini, R.}, title = {Assessment of Surface Modification of Nano Alumina with Vinyl Silane on Physical and Mechanical Properties of Vinyl Ester Resin}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {233-246}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, surface modification of nano α-alumina with Surface modifier was silane coupling agent namely vinyl tri methoxy silane (VTMS) was implement. Salinization reaction under hydrolysis, condensation condition and different concentration of silane coupling agent with spot of isoelectric point of nano alumina was performed. After surface modification, to characterizing amount of grafting on the nanoparticles, Elemental analysis (CH), Fourier transform infrared (FTIR) spectroscopy were utilized. Vinyl Ester nanocomposites were prepared using various loadings of silane modified alumina nanoparticles. To quantitative interfacial interaction between treated nano particles and vinylester resin using tests SEM for assessment dispersion and surface fracture behavior, Dynamic mechanical thermal analysis (DMTA), Degree of cure, Haze value, Abrasion resistance (Tabber), acid chemical resistance and Pull Off adhesion. Results from FTIR and Elemental analysis revealed that the organic functional groups of the silane coupling agent layers were successfully grafted on the surface of the nanoparticles. The mechanical properties results of the vinyl ester revealed that, because of good interaction between particles and vinyl ester resin, were enhanced using 3 wt% alumina nanoparticles modified with 0.48 g silane compared with other samples.}, keywords = {Nano alumina,surface treatment,Vinyl silane,Analysis of surface chemistry,Mechanical properties}, title_fa = {بررسی اثر اصلاح سطحی نانو ذرات آلومینا با وینیل سیلان بر خواص فیزیکی مکانیکی رزین وینیل استر}, abstract_fa = {در این تحقیق اصلاح سطحی نانو ذرات آلومینا نوع آلفا با ماده آمایش کننده سیلانی به نام وینیل تری متوکسی سیلان انجام شد. واکنش سیلان‌دار شدن تحت شرایط آبکافت و تراکمی و غلظت‌های پایین، بالا و استوکیومتری و با در نظر گرفتن نقطه ایزو الکتریک نانو آلومینا انجام شد. بعد از فرآیند آمایش سطحی به منظور کمی کردن میزان سیلان سطحی، آزمون آنالیز عنصری کربن هیدروژن ،آزمون FT-IR انجام گردید. نانو کامپوزیت بر پایه رزین وینیل استر در غلظت‌های مختلف از ذرات آلومینای اصلاح شده تهیه شد. جهت کمی کردن برهم‌کنش سطحی و شیمیایی ذرات اصلاح شده و اصلاح نشده با بستر رزینی وینیل استر، آزمون‌های میزان پراکنش و بررسی سطح شکست با میکروسکوپ روبشی (SEM)، آزمون دینامیکی مکانیکی حرارتی (DMTA)، میزان پخت، میزان شفافیت، مقاومت به سایش، مقاومت شمیایی در محیط اسیدی (اسید استیک) و چسبندگی بررسی شد. نتایج حاصل از FT-IR و آنالیز عنصری نشان داده است که لایه‌های سیلان بر روی سطح ذرات به صورت موفقیت‌آمیزی قرار گرفته است. نتایج نشان داده است که خواص نهایی نانو کامپوزیت وینیل استر حاوی 3% وزنی آلومینا اصلاح شده با 0.48 گرم سیلان به دلیل برهم‌کنش مناسب ذرات با ماتریس رزین بهتر از بقیه نمونه‌ها بوده است.}, keywords_fa = {نانو آلومینا,آمایش سطحی,وینیل سیلان,آنالیز شیمی سطح,خواص مکانیکی}, url = {https://jcst.icrc.ac.ir/article_76202.html}, eprint = {https://jcst.icrc.ac.ir/article_76202_0b5d8f97027ac527d66c4920eb65427a.pdf} } @article { author = {Mehralipour, J. and Dayari, A. and Rezaei Vahidian, H. and Samarghandi, M. and Azizi, F.}, title = {Optimization of Electro-proxone Via Response Surface Statistical Model in Decolorization of Acid Orange 7 Dye from Synthetic Wastewater}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {247-258}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Electro-proxone process is combination of ozonation process and electrolysis that to produce the hydroxyl radical. The aim of this study was to optimization of Electro-proxone process via response surface statistical model in decolonization of Acid Orange 7 dye from synthetic wastewater. In this study was used semi-batch reactor via four graphite electrodes by 2×10 cm dimension. The effect of pH (2-4), concentration of ozone gas (2-4 gr/hr.L), direct electric current (2-4 A), reaction time (15-30 min) parameters via response surface statistical model was investigated. Measuring of Acid Orange 7 dye with DR6000 and measuring of COD and TOC according to methods that presented in standard methods for the examination of water and wastewater book. The results indicates proper performance of this process in decolonization of dye and COD and TOC removal. Performance of process in optimum condition is pH=3/50, direct electric current=3/4A, concentration of ozone gas is 3/64 gr/hr.L and reaction time is 30 minute in 100 mg/L initial concentration of dye. In this condition efficiency of process obtained 86/42%. The process efficiency in COD and TOC removal in 60 minute to the maximum amount reached. The Electro-proxone process as a choices of advance oxidation process have good ability to decrease of dye industrial pollutants.}, keywords = {Electroproxone process,Acid Orange 7 dye,Response Surface Methodology,COD,TOC,Aqueous}, title_fa = {بهینه‌سازی فرآیند الکتروپراکسون با بهره‌گیری از مدل آماری رویه پاسخ در رنگبری ماده رنگزای اسید نارنجی 7 از پساب ساختگی}, abstract_fa = {فرآیند الکتروپراکسون تلفیقی از فرآیند ازن‌زنی ساده و الکترولیز می‌باشد که منجر به تولید رادیکال هیدروکسیل می‌گردد. هدف از این مطالعه، بهینه‌سازی فرآیند الکتروپراکسون با بهره‌گیری از مدل آماری رویه پاسخ در رنگبری ماده رنگزای اسید نارنجی 7 از پساب ساختگی بود. در این مطالعه از راکتور نیمه پیوسته مجهز به چهار الکترود گرافیت با ابعاد 2×10 سانتی‌متر استفاده شد. تاثیر عواملی مانند pH (4-2)، غلظت ازن ورودی gr/hr.l (4-2)، آمپر (A 4-2) و زمان واکنش (min 15-30) توسط مدل آماری رویه پاسخ مورد بررسی قرار گرفت. اندازه‌گیری غلظت ماده رنگزای اسید نارنجی 7 با استفاده از دستگاه طیف‌سنج و اندازه‌گیری COD و TOC بر اساس روش‌های ارایه شده در مرجع آزمایشات آب و فاضلاب صورت گرفت. نتایج به دست آمده بیانگر کارایی مناسب این فرآیند در رنگبری و حذف COD و TOC می‌باشد. کارایی فرآیند در شرایط بهینه که شامل 3.5pH=، جریان الکتریکی برابر 3.4 آمپر، دبی ازن ورودی برابر gr/hr.l 3.64، زمان واکنش برابر 30دقیقه در غلظت اولیه ماده رنگزا برابر 100 میلی‌گرم در لیتر 86.42 درصد به دست آمد. میزان کارایی فرآیند در حذف COD و TOC در مدت زمان 60 دقیقه به حداکثر مقدار خود رسید. فرآیند الکتروپراکسون به عنوان یکی از گزینه‌های فرآیندهای اکسایش پیشرفته، توانایی کاهش بار آلودگی صنایع حاوی موادرنگزا را، دارد.}, keywords_fa = {فرآیند الکتروپراکسون,ماده رنگزای اسید نارنجی 7,COD,TOC,مدل آماری رویه پاسخ,محیط‌های آبی}, url = {https://jcst.icrc.ac.ir/article_76203.html}, eprint = {https://jcst.icrc.ac.ir/article_76203_269955475545e379b4ad53496ba5cade.pdf} } @article { author = {Barani, Hossein and جمشیددوست, زهرا and رفیعی, سعیده}, title = {Optimization of Wool Fibers Dyeing with Saffron Petal to Produce Blue Shade}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {259-266}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {This research is based on to optimize the application of saffron’s petal as a natural dye in wool yarn dyeing process to produce blue shade. Saffron’s petal colorant substance is Anthocyanin, which can be used as natural dyes. Experimental design software was applied to optimize the effective dyeing parameters of wool dyeing such as tin chloride concentration as a mordant (0% to 3%), saffron petals concentration (50% to 200%), dyeing time (30 to 80 minutes) and the final temperature dyeing process (50 to 95 ° C) to get blue shade. In order to this, the color appearance, light and washing fastness of dyed samples was studied at different conditions dyeing. Statistical results of the quadratic polynomial model based on experimental results showed that tin chloride concentration (p}, keywords = {Natural Dye,Saffron’s petal,Anthocyanin,Blue shade,optimization}, title_fa = {بهینه‌سازی شرایط رنگرزی الیاف پشمی با گلبرگ زعفران جهت کسب شید آبی}, abstract_fa = {در این پژوهش، گلبرگ زعفران به عنوان یک ماده رنگزای طبیعی جهت کسب شید آبی روی نخ پشمی معرفی و با توجه به این هدف، فرآیند رنگرزی بهینه‌‌سازی شده‌است. ماده رنگزای موجود در گلبرگ زعفران مربوط به ماده‌ای به نام آنتوسیانین می‌باشد که می‌توان آن را به عنوان یک ماده رنگزای طبیعی استفاده نمود. از نرم‌افزار طراحی آزمایش به منظور بهینه‌سازی عوامل موثر از قبیل غلظت کلرید قلع به عنوان دندانه (0تا 3%)، غلظت گلبرگ زعفران (50تا 200%)، مدت زمان رنگرزی (30 تا 80 دقیقه) و دمای نهایی فرآیند رنگرزی (50 تا 95 درجه سانتی‌گراد) در رنگرزی کلاف نخ پشمی جهت کسب شید آبی استفاده شد و سپس ویژگی‌های ظاهر رنگی، ثبات شستشویی و نوری نمونه‌های رنگرزی شده در شرایط مختلف رنگرزی مورد بررسی قرار گرفت. نتایج آماری مربوط به برازش مدل درجه دوم چند جمله‌ای بر نتایج تجربی نشان داد که متغییرهای غلظت دندانه کلرید قلع (0.0001p}, keywords_fa = {رنگرزی طبیعی,گلبرگ زعفران,آنتوسیانین,شید آبی,بهینه‌سازی}, url = {https://jcst.icrc.ac.ir/article_76204.html}, eprint = {https://jcst.icrc.ac.ir/article_76204_7a822bdb7008dd373757ff04abf95e98.pdf} } @article { author = {رسولی, لیلی and Naderi, R. and Mahdavian ahadi, M. and Arabi, A. M.}, title = {The Effect of Structure of Zeolite as an Inorganic Inhibitor Reservoir on Mild Steel Corrosion in a Sodium Chloride Solution}, journal = {Journal of Color Science and Technology}, volume = {10}, number = {4}, pages = {267-277}, year = {2016}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research two different zeolites as zinc cation reservoir were synthesized. The structure of zeolites was different regarding precursor of synthesis, particles size and shape, crystallinity degree and Si/Al ratio. First, the structure of zeolites was determined by XRD and SEM. The effect of zeolites containing zinc cation on the corrosion of mild steel in a sodium chloride solution was studied through taking advantage of electrochemical analysis such as electrochemical impedance spectroscopy and polarization as well as scanning electron microscopy surface analysis. The results indicated that the ability of zeolite to release inhibiting species not only is influenced by type of zeolite but also depends on Si/Al ratio and the amount of crystalline or amorphous structure.}, keywords = {Zeolite,Active corrosion protection,Corrosion inhibitor reservoir,electrochemical impedance spectroscopy,Polarization measurements}, title_fa = {اثر ساختار زئولیت به عنوان حامل بازدارنده معدنی بر خوردگی فولاد نرم در محلول سدیم کلراید}, abstract_fa = {در این مقاله دو نوع زئولیت با ساختاری متفاوت به عنوان حامل کاتیون روی سنتز گردید. این دو نوع زئولیت از لحاظ مواد اولیه سنتز، اندازه و شکل ذرات، میزان بلورین شدن و نسبت Si/Al متفاوت بود. در ابتدا ساختار زئولیت با آزمون پراش پرتو ایکس و میکروسکوپ روبشی بررسی شد. تاثیر زئولیت به عنوان حامل کاتیون روی بر رفتار فولاد نرم در محلول سدیم کلراید به وسیله آزمون‌های الکتروشیمیایی اعم از طیف‌سنجی امپدانس الکتروشیمیایی و پلاریزاسیون و همچنین آنالیز سطحی نظیر میکروسکوپ روبشی بررسی شدند. نتایج این بررسی‌ها نشان داد توانایی رهایش بازدارنده که بر رفتار خوردگی نمونه‌های فولادی اثرگذار است علاوه بر نوع زئولیت به نسبت Si/Al و میزان ساختار کریستالی و بی‌شکل زئولیت نیز وابسته می‌باشد.}, keywords_fa = {زئولیت,حفاظت فعال,حامل بازدارنده خوردگی,طیف‌سنجی امپدانس الکتروشیمیایی,پلاریزاسیون}, url = {https://jcst.icrc.ac.ir/article_76205.html}, eprint = {https://jcst.icrc.ac.ir/article_76205_624d605cdab0519bb5ead7dce3e2b837.pdf} }