@article { author = {Khajeh Mehrizi, Mohammad and Mortazavi, S. M. and Mallakpour, S. and Bidoki, S.M.}, title = {Effect of Carbon Black and Carbon Active on Color and Physical Properties of Cotton/Nylon Fabric}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {93-100}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Nowadays, concealment of textile and equipments in military industries has received specific interest in various countries. In this research, by application of nano- Carbon Black (CB) and micro- Carbon Active (CA) in a specific print formulation on cotton/nylon (Co/PA) fabric to produce khaki color, the required standard Vis-NIR reflectance for a successful obscure for desert environment was matched. Reflectance behavior of samples showed that by application of CB rare value in khaki printing formulations could tune spectral level in order to match the reference khaki reflectance in Vis-NIR range. Air permeability of sample was increased by adding CB particles to the printing paste. Evaluation of contact angle with water depicted that when concentration of carbon absorbing pigments raise, surface contact angle increase and the water entirely absorb at the long time. Also, color fastness of printed samples against washing, light and rubbing were good achieved.}, keywords = {Concealment,Nano carbon black,Micro carbon active,Co/PA fabric,Vis-NIR reflectance}, title_fa = {تاثیر کربن مشکی و کربن فعال بر خواص رنگی و فیزیکی پارچه پنبه- نایلونی}, abstract_fa = {امروزه پنهان‌کردن البسه و تجهیزات در صنایع نظامی در کشورهای مختلف از اهمیت خاصی برخوردار است. در این کار تحقیقاتی تلاش شده است تا با بهره‌گیری از نانوذرات کربن مشکی و میکروذرات کربن فعال در خمیر چاپ فام خاکی پارچه‌های پنبه/نایلونی مورد استفاده در منسوجات نیروهای نظامی در مناطق بیابانی، میزان انعکاس استاندارد مورد نیاز آنها در نواحی مرئی و زیر قرمز نزدیک (Vis-NIR) شبیه‌سازی شود. رفتار انعکاسی نمونه‌ها نشان داد که با استفاده از مقدار جزئی کربن مشکی در فام خاکی می‌توان به نحو مطلوبی انعکاس نمونه استاندارد را در نواحی Vis-NIR همانند نمود. نفوذپذیری هوا در نمونه‌ها با افزایش غلظت ذرات کربن در خمیر چاپ، افزایش یافت. ارزیابی زاویه تماس نمونه‌ها با آب نشان می‌دهد که هرچه غلظت رنگدانه‌های جاذب کربنی در خمیر چاپ افزایش می‌یابد زاویه تماس سطحی بیشتر می‌شود و در زمان‌های طولانی‌تر آب کاملا روی سطح پخش می‌شود. همچنین نتایج ثبات‌های شستشویی، نوری و مالشی در همه نمونه‌های چاپ شده خوب حاصل شد.}, keywords_fa = {پنهان‌کردن,نانو ذرات کربن مشکی,میکرو ذرات کربن فعال,پارچه پنبه/نایلونی,انعکاس مرئی و زیر قرمز نزدیک}, url = {https://jcst.icrc.ac.ir/article_76117.html}, eprint = {https://jcst.icrc.ac.ir/article_76117_ba3cc428f9308be020548b0fb6444c94.pdf} } @article { author = {Ghofrani, M. and Khojasteh khosro, S.}, title = {The Effect of Surface Fat Removal in Fatty Wood on the Adhesion Strength of Clear Coating}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {101-107}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The aim of this study was to investigate the effect of surface fat removal of two fatty wood species, jujube (Ziziphus jujuba) and pistachio (Pistacia mutica) on the adhesion strength of transparent coatings. Test specimens were prepared from wood with 8% moisture content and dimensions of 300×100×10 mm. The specimen’s surfaces were rinsed with thinner and industrial acetone, separately and covered with clear coat (sealer, clear and acid catalyzed). The results showed that the surface fat removal had significant effect on adhesion strength of applied coatings on wood surface. In both species the maximum value of adhesion strength was resulted in surface fat removed by industrial acetone. Finally, the maximum value of adhesion strength was also resulted from sealer - clear and acid catalyzed coating applied on surface fat removed jujube with acetone.}, keywords = {Adhesion strength,Surface fat removal,Jujube,Pistachio,Clear coat}, title_fa = {اثر چربی زدایی سطح چوب های چرب بر مقاومت چسبندگی پوشش در شفاف پوشه‌ها}, abstract_fa = {در این تحقیق، بررسی تاثیر چربی‌زدایی سطح دو گونه از چوب‌های چرب عناب و پسته بر مقاومت چسبندگی پوشش در شفاف پوشه‌ها مورد ارزیابی قرار گرفت. به همین منظور نمونه‌هایی با رطوبت 8 درصد و ابعاد 10×100×300 میلی‌متر تهیه و سطوح آنها به طور مجزا با دو ماده تینر فوری و استن صنعتی شست و شو داده شد و سپس سطوح نمونه‌ها با شفاف پوشه‌های سیلر،کیلر و نیم پلی‌استر پوشش داده شدند. نتایج به دست آمده از این مطالعه نشان می‌دهد که چربی‌زدایی سطح اثر قابل توجهی بر افزایش چسبندگی پوشش اعمال شده بر روی سطوح چوب داشت به طوری که در هر دو گونه بیشترین میزان چسبندگی پوشش در اثر چربی‌زدایی سطح با استن صنعتی مشاهده شد. در حالت کلی نیز بالاترین چسبندگی در اثر پوشش سیلر- کیلر- نیم پلی‌استر اعمال شده بر روی نمونه‌های عناب چربی‌زدایی شده با استن به دست آمد.}, keywords_fa = {مقاومت چسبندگی,چربی‌زدایی سطح,عناب,پسته,شفاف پوشه‌ها}, url = {https://jcst.icrc.ac.ir/article_76118.html}, eprint = {https://jcst.icrc.ac.ir/article_76118_244e47e79146623535fded803156bbdf.pdf} } @article { author = {Mahmoudi Nahavandi, A. and Safi, M.}, title = {Investigating and Proving of Multiplicative Lighting Correction in Color Characterization of Digital Camera}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {109-115}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Digital color cameras are being taken attention for color appearance measurement. However, exploiting these devices needs some device calibrations. One of the most important tunings is the quality of lighting. Inhomogeneous lighting may cause some difficulties in measurements. Although the multiplicative inhomogeniteiy correction method has been used in many papers, none of them has ever rationalized this method. In this paper multiplicative inhomogeniteiy correction has been proved using linear model of camera. Moreover the effect of two correction methods including multiplicative and additive methods on the result of characterization of camera has been studied. The results showed that multiplicative correction method gives a better performance comparing other methods. Also, a proof has been given for efficiency of multiplicative correction method.}, keywords = {Digital camera,Colorimetric characterization,Lighting inhomogeniteiy correction,Color measurement}, title_fa = {بررسی عملکرد و اثبات روش ضربی اصلاح نایکنواختی تابش در توصیف رنگی دوربین دیجیتالی}, abstract_fa = {اخیراً دوربین‌های دیجیتال رنگی به عنوان ادوات جایگزین برای اندازه‌گیری ظاهر رنگی اجسام مورد توجه زیادی قرار گرفته‌اند. با این وجود، استفاده از این دوربین‌ها نیازمند تنظیمات و مهیا نمودن شرایط اولیه است. یکی از مهم‌ترین تنظیمات، کیفیت نورپردازی است که به دلیل نایکنواختی باعث بروز مشکلات فراوان در اندازه‌گیری‌ها خواهد شد. اگرچه در مقالات متعدد از روش تصحیح ضربی برای تصحیح نایکنواختی‌های تابش استفاده شده است، ولی تاکنون در هیچ یک از کارهای انجام شده دلیلی برای اثبات صحت عملکرد این روش ارائه نشده است. در پژوهش حاضر با استفاده از مدل خطی دوربین اثباتی برای مدل تصحیح ضربی ارائه شده است. همچنین اثر روش‌های مختلف تصحیح نایکنواختی تابش، ازجمله تصحیح ضربی وجمعی توسط کارت سفید،‌ مقایسه شد و تاثیر تصحیح‌های انجام شده بر روی نتایج حاصل از توصیف کالریمتریک دوربین مورد بررسی قرار گرفت. نتایج این تصحیح روی توصیف کالریمتریک دوربین نشان داد که استفاده از روش تصحیح ضربی نتایج مطلوب‌تری را نسبت به روش دیگر ارائه می‌دهد.}, keywords_fa = {دوربین دیجیتال,توصیف کالریمتریک,اصلاح نایکنواختی تابش,اندازه‌گیری رنگ}, url = {https://jcst.icrc.ac.ir/article_76119.html}, eprint = {https://jcst.icrc.ac.ir/article_76119_42d8fa83a0eba3da9bb4f093d1bd64ef.pdf} } @article { author = {Lajevardi Esfahani, S. and Ranjbar, Z. and Rastegar, S.}, title = {Investigation of Protective Behavior of Different Cathodic Electrocoatings Using Different Anti-Corrosive Tests (Modified AC/DC/AC Test, EIS and Salt Spray)}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {117-128}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, an accelerated electrochemical test was introduced as modified AC/DC/AC test. This test consists of D.C. polarization, soaking and dry cycles. The evaluated coating was cathodic electrocoating that electrodeposited on phosphated mild steel substrate with an average thickness of 20 microns and cured in three different conditions. In this research, the protective behavior of cathodic electrocoatings was investigated using the modified AC/DC/AC test, EIS and salt spray tests. Results showed that cathodic electrocoatings with low crosslinking density have better resistance against mechanical stresses during the modified AC/DC/AC test because of their more flexibility. On the other hand, due to the poor resistance against electrochemical stresses, final loss of protective properties of low-crosslinked electrocoatings are notable. The study manifests good correlation between the results of carried tests which the acceleration of coating degradation under the modified AC/DC/AC test conditions is the most.}, keywords = {Modified AC/DC/AC test,EIS,Salt spray test,Cathodic electrocoating}, title_fa = {ارزیابی رفتار حفاظتی الکتروپوشش‌های کاتدی به روش‌های AC/DC/AC اصلاح شده، EIS و مه نمکی}, abstract_fa = {در این تحقیق، یک آزمون الکتروشیمیایی شتابیده تحت عنوان آزمون AC/DC/AC اصلاح‌شده معرفی شد به‌‌طوری که ترکیبی از چرخه‌های تر و خشک و پلاریزاسیون کاتدی است. پوشش مورد بررسی الکتروپوشش کاتدی با ضخامت متوسط 20 میکرون اعمال شده بر روی فولاد معمولی پخت شده در شرایط دمایی مختلف بود. در این تحقیق عملکرد حفاظتی الکتروپوشش کاتدی توسط آزمون‌های AC/DC/AC اصلاح‌شده، طیف‌سنجی امپدانس الکتروشیمیایی (EIS) و مه نمکی ارزیابی شد. نتایج نشان داد الکتروپوشش‌های کاتدی با چگالی شبکه‌ای کمتر به دلیل انعطاف‌پذیری بیشتر مقاومت بهتری در مقابل تنش‌های مکانیکی در آزمون AC/DC/AC اصلاح شده دارند اما به دلیل مقاومت کمتر در مقابل تنش‌های الکتروشیمیایی، افت خواص حفاظتی آنها بیشتر از سایر نمونه‌ها است. نتایج این تحقیق نشان‌دهنده همبستگی کامل آزمون‌ AC/DC/AC اصلاح‌شده با آزمون EIS غوطه‌وری و آزمون مه نمکی پیوسته متداول در صنعت خودرو برای الکتروپوشش‌های کاتدی می‌باشد؛ اما میزان شتاب یافتگی و سرعت تخریب الکتروشیمیایی در آزمون AC/DC/AC بیشتر از آزمون‌های EIS و مه نمکی است.}, keywords_fa = {AC/DC/AC اصلاح شده,طیف‌سنجی امپدانس الکتروشیمیایی,مه نمکی,الکتروپوشش کاتدی}, url = {https://jcst.icrc.ac.ir/article_76120.html}, eprint = {https://jcst.icrc.ac.ir/article_76120_c2f451c00c41dae1ecb3f35f3096eccd.pdf} } @article { author = {Sharifi Golru, S. and Attar, M. M. and Ramezanzadeh, B.}, title = {An Investigation of Electrochemical and Surface Characteristics of Aluminium Alloy-1050 Surface Prepared by Different Methods}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {129-136}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, the surface of aluminium alloy 1050 was prepared by different methods of including (1) degreasing, (2) alkaline etching, (3) alkaline etching followed by acid washing and (4) mechanical polishing before alkaline etching followed by acid washing. The electrochemical properties of the samples and their surface morphology and composition were studied by DC polarization technique, open circuit potential (OCP) measurements in 3.5% (w/w) NaCl solution and scanning electron microscope (SEM) equipped with energy dispersive x-ray spectroscopy (EDS). Results revealed that method (3) could be the most effective way of oxide layer removal and cathodic sites reduction from the surface of aluminum. Also the results obtained from pull off adhesion test showed adhesion improvement for the surface prepared sample through method (3) in comparison with methods (1) and (2).}, keywords = {Aluminium alloy 1050,surface preparation,Electrochemical test,morphology,Adhesion,Epoxy Coating}, title_fa = {ارزیابی خواص الکتروشیمیایی و سطحی آلیاژ آلومینیم 1050 آماده‏‌سازی شده با روش‏‌های مختلف}, abstract_fa = {در این مطالعه، آلیاژ آلومینیم 1050 با روش‏های مختلف شامل چربی‏گیری، شستشوی قلیایی، شستشوی قلیایی و به دنبال آن شستشوی اسیدی و سنباده‌زنی و به دنبال آن شستشوی قلیایی و سپس شستشوی اسیدی، آماده‏سازی شد. خواص الکتروشیمیایی نمونه‏ها و همچنین ریخت و ترکیب سطح آنها توسط آزمون‏های الکتروشیمیایی پلاریزاسیون، اندازه‌گیری پتانسیل مدار باز (OCP) در محلول 3.5% وزنی NaCl و میکروسکوپ الکترونی روبشی مجهز به آنالیز عنصری بررسی شدند. نتایج نشان داد که آماده‏سازی با روش شستشوی قلیایی و به دنبال آن شستشوی اسیدی مناسب‏ترین روش از نظر حذف لایه‏‎های اکسیدی و کاهش مکان‏های کاتدی از سطح فلز می‌باشد. همچنین، نتایج حاصل از چسبندگی pull off بهبود چسبندگی پوشش اپوکسی بر روی زیرآیند آماده‌سازی شده به روش 3 در مقایسه با نمونه‏های آماده‏سازی شده با روش چربی‌گیری و شستشوی قلیایی را نشان داد.}, keywords_fa = {آلیاژ آلومینیم 1050,آماده‌سازی,آزمون الکتروشیمیایی,ریخت‌شناسی,چسبندگی,پوشش اپوکسی}, url = {https://jcst.icrc.ac.ir/article_76121.html}, eprint = {https://jcst.icrc.ac.ir/article_76121_1b1b8d5c7642485c179aa767ef264a7e.pdf} } @article { author = {Haddadi, S. A. and Mahdavian ahadi, M. and Abbasi, F.}, title = {Evaluation of B4C Particles Effects on Curing and Thermal Stability of Resole Resin}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {137-147}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {This work intends to study the effect of boron carbide (B4C) as filler (1 wt. %) on thermal stability of the resole resin. Thermal properties was studied by means of thermo gravimetric analysis (TGA) to evaluate char yield and differential scanning calorimetric (DSC) to evaluate the resin curing behavior and boron carbide effects on curing reaction heat. Results showed increase of char yield and decrease of curing reaction heating the presence of B4C. The results of Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy dispersive x-ray spectroscopy (SEM-EDS) revealed conversion of the B4C to B2O3 which resulted in volume expansion and compensation of the resin shrinkage, which led to the high thermal stability of the compounded resin.}, keywords = {Phenolic resin,Resole,Boron carbide,Thermal stability}, title_fa = {بررسی اثر کاربید بور بر پخت و پایداری حرارتی رزین رزول}, abstract_fa = {در این پژوهش اثر پرکننده کاربید بور (B4C) به میزان 1 درصد بر پایداری حرارتی رزین رزول مورد بررسی قرار گرفت. در مطالعه خواص حرارتی از آزمون‌‌های گرما‌ وزن‌سنجی (TGA) جهت بررسی رفتار تخریب رزین و میزان زغال‌گذاری آن و آزمون گرما‌سنجی تفاضلی پویشی (DSC) جهت مطالعه رفتار پخت رزین و تاثیر کاربید بور بر گرمای واکنش پخت استفاده شده است. نتایج حاکی از آن است که با افزودن کاربید بور میزان زغال‌گذاری رزین در دماهای بالا به نحو چشم‌گیری افزایش یافته است. همچنین با افزودن کاربید بور گرمای واکنش پخت کاهش یافته است که این کاهش جزئی در مقایسه با سایر خواص اصلاحی قابل صرفه نظر کردن می‌باشد. نتایج آزمون طیف‌سنجی زیر قرمز تبدیل فوریه (FTIR) و میکروسکوپ الکترونی روبشی مجهز به آنالیز عنصری (SEM-EDX) نشان داد در دمای ‍°C 800، کاربید بور به اکسید‌بور تبدیل می‌شود و با توجه به افزایش حجمی که در پی آن ایجاد می‌کند، انقباض و چروکیدگی رزین را تا حد زیادی جبران می‌نماید که منجر به پایداری حرارتی بالای آمیزه رزین می‌شود.}, keywords_fa = {رزین فنولیک,رزول,کاربید بور,پایداری حرارتی}, url = {https://jcst.icrc.ac.ir/article_76122.html}, eprint = {https://jcst.icrc.ac.ir/article_76122_872a63af062c3e84823a5321c0e21028.pdf} } @article { author = {Rasoulifard, M. and Ghalamchi, L. and Pourata, R.}, title = {Photo-oxidation Degradation of Reactive Blue 19 by (Solar/S2O82-) Process in Presence of Solar Parabolic Concentrator Reactors}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {149-155}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Dyes belong to organic compound families with complex structure due to their toxicity, carcinogenic and lack of biodegradability properties are considered as a serious environmental pollutant. The objective of this paper is to investigate decolorization of Reactive Blue 19 from contaminated water by potassium peroxydisulfate and solar light in the presence of solar parabolic concentrator. Solar irradiation intensity will be increased. In this case radiation after reflecting will be concentrated on the focal path of collector. The more light intensity, the more enhancement production of sulfate radical from persulfate would be. In this study evaluation of effective parameter has been investigated. Regards to the results from homogenous photo-oxidation in presence of solar concentrator has been introduced and considered as a superior option for removal of dyes from textile industry wastewater. Using this collector dramatically increase the performance of advanced oxidation processes respects 98% of RB19 has been mineralized during 60 min in optimal condition.}, keywords = {Advanced Oxidation Process,Solar concentrator,Reactive Blue 19,Water and Wastewater Treatment}, title_fa = {حذف فوتواکسیداسیونی رنگزای راکتیو آبی 19 طی فرآیند (Solar/S2O82-) در حضور راکتورهای متمرکزکننده سهمی‌وار خورشیدی}, abstract_fa = {رنگزا‌ها ترکیبات آلی با ساختار پیچیده هستند که به دلیل سمیت، سرطان‌زایی و عدم تجزیه زیستی یکی از مهم‌ترین آلاینده‌های زیست محیطی محسوب می‌شوند. هدف از این مطالعه بررسی فرآیند اکسایش پیشرفته با استفاده از اکسیدکننده پتاسیم پراکسی‌دی‌سولفات و نور خورشید در حضور متمرکزکننده‌های سهمی‌وار خورشیدی جهت حذف رنگزای راکتیو آبی 19 از آب‌های آلوده می‌باشد. شدت تابش نور‌خورشید در حضور این نوع ازمتمرکز کننده‌های خورشیدی افزایش می‌یابد به طوریکه پرتوها پس از انعکاس از سطوح آینه‌ای در نقطه کانونی متمرکز می‌گردند. افزایش شدت تابش نور باعث افزایش رادیکال‌های سولفات تولید شده از پتاسیم پراکسی‌دی‌سولفات می‌شود. در این مطالعه، عوامل موثر بهینه‌سازی شدند. با توجه به نتایج، استفاده از فرآیند فوتوکاتالیزوری همگن به کمک متمرکز کننده‌های نور‌خورشید می‌تواند به عنوان یک گزینه مناسب در جهت حذف موثر رنگزا از پساب‌های صنایع نساجی معرفی گردد به طوری که 98% از این رنگزا در مدت زمان 60 دقیقه در شرایط بهینه حذف گردید.}, keywords_fa = {فرآیند اکسایش پیشرفته,متمرکزکننده‌های نور خورشید,راکتیو آبی 19,تصفیه آب و پساب}, url = {https://jcst.icrc.ac.ir/article_76123.html}, eprint = {https://jcst.icrc.ac.ir/article_76123_f154212ac36aba93d04f9ff3e9fc2127.pdf} } @article { author = {Ameri, F. and Khalili, N. and Mirjalili, F.}, title = {Determination of Tolerance Regions for Assessment and Quality Control Parameters of Automotive Appearance}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {157-166}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In the present study, attempts were made to investigate the possibility of developing a two dimensional appearance chart to make provisions for a straightforward assessment and control of appearance quality of achromatic automotive finishes. To this end, four series of random test samples in which the three geometric appearance attributes, namely specular gloss, distinctness of image and orange peel varied simultaneously were prepared using metallic black, metallic grey, metallic silver and solid white automotive finishes. The samples were visually evaluated by a panel of 16 observers, utilizing grey scale technique. Analyzing the results of correlation between visually quantified total appearance and instrumentally measured specular gloss, distinctness of image and orange peel attributes of random samples showed that there is a good correlation between instrumentally measured distinctness of image and the Wave scan Wd parameters, and the corresponding visually evaluated data at the four investigated achromatic levels.Using these two parameters, a two dimensional appearance chart was developed for achromatic automotive finishes under investigation. Discrete acceptable, tolerable and unacceptable tolerance regions were determined for distinctness of image and Wd parameters, separately for horizontal and vertical automotive body parts, using the results of visual inspections of 6 expert auditors of the Iran Khodro car manufacturing company on 28 randomly selected car bodies with different achromatic levels.}, keywords = {appearance,Tolerance regions,Visual assessment,Distinctness of image,Orange peel,Gloss}, title_fa = {تعیین حدود رواداری برای شاخص‌های ارزیابی و کنترل کیفیت ظاهری خودرو}, abstract_fa = {در این پژوهش، امکان تعریف یک فضای دوبعدی بر اساس مهم‌ترین ویژگی‌های هندسی سطح با حدود رواداری مشخص به منظور تسهیل فرآیند ارزیابی و کنترل جلوه ظاهری روکش‌های سطح خودرویی آکروماتیک مورد بررسی قرار گرفت. برای این منظور تعدادی نمونه با استفاده از چهار روکش سطح خودرویی مشکی متالیک، خاکستری متالیک، نقره‌ای متالیک و سفید غیرمتالیک تهیه گردید، به نحوی که ویژگی‌های هندسی آنها شامل براقیت، وضوح تصویر و پوست پرتقالی به صورت تصادفی متغیر بود. جلوه ظاهری کلی این نمونه‌ها توسط 16 نفر مشاهده‌کننده و با روش اختلاف‌سنجی با مقیاس خاکستری در کابینت نوری مورد ارزیابی قرار گرفت. بررسی ارتباط نتایج ارزیابی چشمی با اندازه‌گیری‌های پارامترهای براقیت آیینه‌ای، وضوح تصویر و پوست پرتقالی (LW و Wd) نشان داد که مشاهده‌کنندگان در ارزیابی جلوه ظاهری کلی نمونه‌ها پوست پرتقالی (Wd) و وضوح تصویر را مورد توجه قرار می‌دهند. براساس نتایج اندازه‌گیری این دو عامل روی سطوح افقی و عمودی 28 بدنه خودرو که به صورت تصادفی انتخاب شدند و نتایج ارزیابی چشمی 6 نفر از آدیتورهای شرکت ایران خودرو روی مناطق مختلف این 28 بدنه، یک فضای دوبعدی با استفاده از وضوح تصویر و Wd با حدود رواداری مشخص در سه منطقه مطلوب، قابل قبول و غیر قابل قبول برای هر یک از سطوح افقی و عمودی بدنه خودرو و به تفکیک برای هر فام تعریف گردید.}, keywords_fa = {جلوه ظاهری,حدود رواداری,ارزیابی بصری,وضوح تصویر,پوست پرتقالی,براقیت}, url = {https://jcst.icrc.ac.ir/article_76124.html}, eprint = {https://jcst.icrc.ac.ir/article_76124_445e7ba5f3d9c22facd8937a431877f0.pdf} } @article { author = {Jafari, R.}, title = {Effect of CIELCH Coordinates on Selection of Preferred Black}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {2}, pages = {167-177}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research the effect of lightness, chroma and hue angle is investigated to select the preferred black among the 216 black fabrics. The rank ordering method was used to visually assess black samples in two steps, i.e., finding the black samples and selecting the preferred black among samples which most of observers detected them as blacks. Performing of 3130 visual assessment experiments shows the effect of hue attribute in blackness perception and preference. In fact, observers mostly selected and preferred the cyanish-bluish blacks while they did not prefer the reddish blacks. Besides, among two blacks with the same chroma and hue angle, the darker one was preferred. For black samples with the same lightness and hues, the blackness preference was related to the sample which is more neutral. Finally, it was found that lightness, chroma and hue angle influence in blackness perception and preference, simultaneously.}, keywords = {Preferred black,CIELCH coordinates,Blackness preference,Rank ordering,Visual assessment}, title_fa = {تأثیر مؤلفه‌های CIELCH در انتخاب سیاه ترجیح داده شده}, abstract_fa = {در این تحقیق تأثیر روشنایی، خلوص و زاویه فام در انتخاب سیاه برتر از میان 216 نمونه پارچه‌ای سیاه بررسی شد. ارزیابی نمونه‌ها با استفاده از روش رتبه‌بندی منظم و طی دو مرحله مجزا شامل انتخاب نمونه‌های سیاه و سپس گزینش سیاه برتر از میان نمونه‌هایی که بیش از 50% ارزیابان آنها را سیاه تشخیص دادند، انجام شد. نتایج حاصل از انجام 3130 آزمون ارزیابی چشمی بیانگر نقش مؤثر ویژگی فام نمونه‌ها در هر دو آزمون انتخاب نمونه سیاه و تعیین سیاه برتر است چون ارزیابان عمدتاً نمونه‌های سیاه ته‌سبز- ته‌آبی (حتی با مقادیر خلوص بالا) را به عنوان سیاه انتخاب کردند. ضمن آنکه عدم ارجحیت سیاهی برای نمونه‌های سیاه با ته‌رنگ‌های قرمز به دست آمد. همچنین مشخص شد که از بین دو نمونه سیاه با مقادیر خلوص یکسان و با ته‌رنگ‌های مشابه، نمونه تیره‌تر بیشتر ترجیح داده می‌شود. این انتخاب در ارزیابی نمونه‌های سیاه با مقادیر روشنایی و زوایای فام تقریباً مشابه، به نمونه خنثی‌تر تعلق گرفت. در پایان، پیچیدگی تابعیت سیاهی و ارجحیت سیاهی از سه مؤلفه روشنایی، خلوص و زاویه فام به طور هم‌زمان محرز گردید.}, keywords_fa = {سیاه ترجیح داده شده,مؤلفه‌های CIELCH,ارجحیت سیاهی,رتبه‌بندی منظم,ارزیابی چشمی}, url = {https://jcst.icrc.ac.ir/article_76125.html}, eprint = {https://jcst.icrc.ac.ir/article_76125_31269a8d31042897b46039443de18235.pdf} }