@article { author = {Kiomarsipour, N. and Shojarazavi, R. and Ghani, K.}, title = {Evaluation of Optical Properties of Silicate White Thermal Control Paints Employed in Spacecraft by Taguchi Method}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {197-207}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Thermal control paints are coatings with special thermo-optical properties that carried out on the outer surface of spacecraft to control the input and output heat. In the present study, to evaluate the effects of different factors on these coatings, ZnO, TiO2 and synthesized pigments and two different compositions of potassium silicate binder with three pigment to binder ratios were used to produce different coatings. The fabricated coatings were applied on the grounded and anodized Al substrates. The design of experiment was performed by Taguchi method including nine experiments. The results of solar absorption and thermal emission indicated that the pigment type was the most important processing parameter and the type of substrate preparation had also a significant effect. In fact, the ZnO pigment had the higher thermal emission and the anodized substrate had the lower solar absorption. The binder composition and pigment to binder ratio had no significant effects on thermo-optical properties. The morphological analyses were carried out by FE-SEM, indicated that all pigments had the similar morphologies and suitable distribution in applied coatings. It can be concluded from the obtained results that the sample consisted of ZnO pigment, the resin with 44.25 solid percentage and SiO2/K2O equal to 1.925, pigment to resin ratio of 4:1 and anodized substrate, can be considered as a optimum specimen.}, keywords = {Thermal control paint,Optical properties,pigment,Taguchi method}, title_fa = {ارزیابی خواص نوری رنگ‌های کنترل گرمایی سفید پایه سیلیکاتی به کار رفته در ماهواره با استفاده از روش تاگوچی}, abstract_fa = {رنگ‌های کنترل گرمایی، پوشش‌هایی با خواص نوری و گرمایی ویژه هستند که بر سطوح خارجی سامانه‌های فضایی به منظور کنترل ورود و خروج گرما اعمال می‌شوند. در تحقیق حاضر، به منظور تعیین تأثیر عوامل مختلف بر خواص رنگ‌های کنترل گرمایی؛ با استفاده از رنگ‌دانه‌های اکسید روی، دی‌اکسید تیتانیم و رنگ‌دانه تولید شده و رزین سیلیکات پتاسیم با دو ترکیب مختلف، پوشش‌هایی تهیه شده و بر روی زیرآیند‌های آلومینیومی اعمال شدند. زیرآیند‌ها در دو حالت سنباده زده و آندایزشده و پوشش‌ها در سه نسبت مختلف رنگ‌دانه به رزین تهیه شدند. جهت انجام و طراحی آزمایش‌ها از روش تاگوچی با تعداد نه آزمون استفاده شد. نتایج اندازه‌گیری جذب خورشیدی و نشر گرمایی پوشش‌های تهیه شده نشان داد که نوع رنگ‌دانه بالاترین تأثیر را بر خواص این رنگ‌ها دارد. به گونه‌ای که با انتخاب رنگ‌دانه مناسب، می‌توان خواص مورد نیاز یک رنگ کنترل گرمایی را به دست آورد. نوع آماده‌سازی زیرآیند نیز دارای تأثیر قابل ملاحظه‌ای است. رنگ‌دانه اکسید روی از بازتاب بالاتری نسبت به دو رنگ‌دانه دیگر برخوردار بوده و زیرآیند آندایزشده نیز دارای جذب خورشیدی پایین‌تر است. ترکیب رزین، هیچ تأثیری بر خواص نداشته و تأثیر نسبت رنگ‌دانه به رزین نیز بسیار اندک است. بررسی ریخت‌شناسی نمونه‌ها با استفاده از میکروسکوپ الکترونی روبشی گسیل میدانی نشان داد که هر سه نوع رنگ‌دانه دارای ریخت‌شناسی مشابه بوده و به خوبی در رزین پراکنده شده‌اند. نمونه حاوی رنگ‌‌دانه اکسید روی و رزین با درصد جامد 44.25 درصد و نسبتSiO2/K2O برابر با 1.925 و نسبت رنگ‌دانه به رزین 4:1، که بر روی زیرآیند آندایزشده اعمال شده بود، به عنوان نمونه بهینه معرفی شد.}, keywords_fa = {رنگ کنترل گرمایی,خواص نوری,رنگ‌دانه,روش تاگوچی}, url = {https://jcst.icrc.ac.ir/article_76053.html}, eprint = {https://jcst.icrc.ac.ir/article_76053_e0dcc7b45d8e1bd44cbffbfc7b784121.pdf} } @article { author = {Parvinzadeh, M. and Moradian, S. and Rashidi, A.S. and Yazdanshenas, M.E.}, title = {Effect of Nanosilica Type on Dyeability of Polyethylene Terephthalate/Silica Nanocomposite}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {209-222}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, polyester nanocomposites containing three types of nanosilica particles as filler were prepared by melt compounding. The influence of type of fillers on various properties of nanocomposite were investigated by atomic force microscopy, scanning electron microscopy, polarized optical microscopy, differential scanning calorimetry, thermal gravimetric analysis, reflectance spectroscopy and light fastness. SEM was used to indicate presence of silica on surface of nanocomposites and it showed that surface roughness depends on hydrophilicity of nanosilica used. Optical microscopy images from nanocomposites containing silica illustrated the increment of the number of spherulites in the PET matrix with increase in silica percentage which were dependent on nano-silica type and content. Differential scanning calorimetry results of the nanocomposites showed a slight decrease in the melting temperature compared to pure PET. Results obtained from dyeing of polymers indicated that hydrophilic nanosilica particles improve the dyeability with disperse dyes at 110 and 130°C. Light fastness of dyed samples containing nanosilica was improved a little as compared with pure PET which could be attributed to certain interactions between nanosilica and dye in the polymer matrix.}, keywords = {polyester,nanosilica,dyeing,Nano composite}, title_fa = {بررسی تاثیر نوع نانوسیلیس بر خواص رنگرزی نانوکامپوزیت پلی‌اتیلن ترفتالات/سیلیس}, abstract_fa = {در این تحقیق نانوکامپوزیت‌های پلی‌استر حاوی سه نوع نانوسیلیس به عنوان پرکننده جهت تهیه به روش مذاب به کار رفت. اثر نوع و مقدار پرکننده‌ها بر خصوصیات مختلف نانوکامپوزیت با روش‌های میکروسکوپ نیروی اتمی، میکروسکوپ الکترونی، میکروسکوپ نوری، گرماسنجی روبشی تفاضلی، مقاومت حرارتی، اسپکتروفوتومتر انعکاسی و ثبات رنگی مورد بررسی قرار گرفت. آزمون میکروسکوپ الکترونی به منظور بررسی وجود سیلیس در سطح کامپوزیت‌ها انجام شد که نشان داد زبری سطح بستگی به درجه آبدوستی سیلیس مورد استفاده دارد. تصاویر میکروسکوپ نوری از نانوکامپوزیت‌های حاوی سیلیس نشان‌دهنده افرایش تعداد گویچه‌ها در بستر پلی‌استر با افزایش درصد سیلیس است. گرماسنجی روبشی تفاضلی از نانوکامپوزیت‌های تهیه شده کمی کاهش در دمای ذوب در مقایسه با پلی‌استر خالص را نشان داد. در نتایج حاصل از رنگرزی این پلیمرها نشان داد که نانوسیلیس‌های آبدوست در دماهای 110 و 130 درجه سانتی‌گراد رنگ‌پذیری پلی‌استر با رنگزای دیسپرس را افزایش می‌دهند. ثبات نوری نمونه‌های رنگرزی شده حاوی نانوسیلیس در مقایسه با نمونه پلی‌‌استر خالص کمی بهبود یافت که نشان دهنده پیوند بین نانوسیلیس و رنگزا در بستر پلیمر است.}, keywords_fa = {پلی استر,نانوسیلیس,رنگرزی,نانو کامپوزیت}, url = {https://jcst.icrc.ac.ir/article_76054.html}, eprint = {https://jcst.icrc.ac.ir/article_76054_394a24622455436c079d95f14e6a7664.pdf} } @article { author = {Amiri, R. and Fakhroueian, Z. and Rasouli, S. and Farhadi, M.}, title = {Synthesis of Biochemically Active Nano Complexes of Toluidine Red and Nickel Metal}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {223-232}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In the present research, the synthesis of some new nano–scale metal chelates of an aromatic azo ligand has been reported. Toluidine red was synthesized by azo-coupling reactions of o-nitro-p-methyl phenyl diazonium salt with 2-naphthol and then its metal complexes were prepared with bulk Ni and Ni/SiO2 nanofine composite on the different pH and with the optimized conditions. The structures of products in overall yields of 75- 85% were deduced from their Atomic absorption and their UV, IR and NMR spectral data. According to XRD data, nano-scaled Toluidine Red-Ni complexes have monoclinic configuration and SEM technique have shown the size of particles are less than 100 nm. Also, nano metal complexes were evaluated in vitro for their antibacterial and antifungal activities against some bacteria and fungi. They have shown high activity against all species of them.}, keywords = {Nanoparticles,Toluidine red,Metal complexes,biochemistry,nickel}, title_fa = {سنتز نانو کمپلکس‌های فعال بیوشیمیایی از قرمز تولوئیدین و فلز نیکل}, abstract_fa = {در تحقیق ارائه شده، سنتز تعدادی کیلیت‌های فلزی جدید در مقیاس نانو از یک لیگاند آزوی آروماتیک گزارش شده است. قرمز تولوئیدین به وسیله واکنش‌های آزو- کوپلینگ نمک اورتو نیترو- پارا متیل- فنیل دی آزونیوم با ۲- نفتل سنتز شد و سپس کمپلکس‌های فلزی آن با نیکل حجیم و نانو کامپوزیت‌های Ni/SiO2 در pH‌ های مختلف و شرایط بهینه واکنش، تهیه گردید. ساختارهای محصولات به دست آمده با بازده ٨٥-٧٥ درصد از جذب اتمی و داده‌های طیفی UV, IRو NMR به دست آمدند. بر طبق داده‌های XRD کمپلکس‌های قرمز تولوئیدین- نیکل در مقیاس نانو پیکربندی مونوکلینیک دارند و تصاویر SEM نشان داده است که اندازه ذرات کمتر از nm ١٠٠ می‌باشد. همچنین فعالیت‌های ضدباکتریایی و ضدقارچی نانو کمپلکس‌های فلزی به صورت in-vitro بر علیه تعدادی باکتری و قارچ ارزیابی شد. آنها فعالیت‌های بالایی را بر علیه تمامی گونه‌ها نشان داده‌اند.}, keywords_fa = {نانوذرات,قرمز تولوئیدین,کمپلکس‌های فلزی,بیوشیمی,نیکل}, url = {https://jcst.icrc.ac.ir/article_76055.html}, eprint = {https://jcst.icrc.ac.ir/article_76055_35f162d8296c93db337aeb05e1c5833b.pdf} } @article { author = {Kayhan, N. and Shojarazavi, R.}, title = {Preparation and Evaluation of White Silicone Thermal Control Paint Properties}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {233-239}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The purpose of the present work is to prepare of white silicone thermal control paint for spacecraft and investigation the effects of atomic oxygen (AO) and thermal cycling on the optical properties. The white paint includes zinc oxide-pigmented silicone resin. The behavior of silicone paint under AO and thermal cycling, were studied by the mass loss of paint specimen and complementary techniques including scanning electron microscopy (SEM) and atomic force microscopy (AFM). Also the optical degradation in the reflectance spectra, solar absorptance and thermal emittance for silicone paint before and after AO and thermal cycle were investigated. Solar absorptance and thermal emittance of this paint were 0.256 and 0.870 respectively. The white silicone paint has promising AO and thermal cycling resistance properties that could be suitable for space applications.}, keywords = {White silicone paint,Atomic Oxygen,Thermal cycling,Solar absorptance,Thermal emittance}, title_fa = {ساخت و ارزیابی خواص رنگ کنترل حرارتی سفید سیلیکونی}, abstract_fa = {هدف از انجام این پژوهش ساخت پوشش سفید سیلیکونی کنترل حرارتی مخصوص ماهواره و بررسی اثرات آزمون‌های اکسیژن اتمی و چرخه حرارتی بر روی خواص نوری آن است. این رنگ با استفاده از رزین سیلیکونی و رنگدانه اکسید روی تهیه شده است. آزمون‌های اکسیژن اتمی و چرخه حرارتی بر روی آن انجام گرفت و اثرات آن با اندازه‌گیری کاهش وزن نمونه و دستگاه‌های میکروسکوپ الکترونی (SEM) و میکروسکوپ نیروی اتمی (AFM) بررسی شد. همچنین تخریب خواص نوری در طیف بازتابی، جذب خورشیدی و نشر حرارتی رنگ، قبل و بعد از آزمون‌های اکسیژن اتمی و چرخه حرارتی مطالعه شد. میزان جذب خورشیدی این رنگ، 0.256 و نشر حرارتی آن 0.870 بود. نتایج به دست آمده نشان داد، رنگ ساخته شده از مقاومت بالایی در مقابل آزمون‌های اکسیژن اتمی و چرخه حرارتی برخوردار بوده و برای کاربردهای فضایی مناسب می‌باشد.}, keywords_fa = {رنگ سفید سیلیکونی,اکسیژن اتمی,چرخه حرارتی,جذب خورشیدی,نشر حرارتی}, url = {https://jcst.icrc.ac.ir/article_76056.html}, eprint = {https://jcst.icrc.ac.ir/article_76056_cbbdca23efda6bc9d3766526165af935.pdf} } @article { author = {Khezri, S. M. and Gordi, E.}, title = {Recovering of Titanium Dioxide from Solvent- Based Paint Sludge(Case Study; Iran Khodro Company)}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {241-246}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Solvent- based paint sludge of automotive industry has a major contamination potential due to containing heavy metals and other toxic substances such as toluene. A range of cleaning techniques has been successfully developed to limit the environmental impact caused by wastewater of these industries, but timely and effective remediation is necessary. The present study aims to estimate the pollution quantity in Solvent- based paint sludge and decrease the pollutant up to environmental standards. Also, optimization of recovering processes of elements is other objective of this study. Titanium dioxide is the main pigment of automotive industry also it is an economical element with high cost. So, titanium dioxide was chosen to recovery from paint sludge. Therefore, sludge samples were collected from paint department of Iran Khodro Company. Then, several methods inclusive of flotation and electrolysis were carried out to recover titanium dioxide from samples. The concentrations of titanium dioxide in all samples were determined by XRF method. The results showed, electrolysis was the best method for recovering titanium dioxide from the paint sludge with70% purity.}, keywords = {Solvent- based paint sludge,Titanium dioxide,Electrolysis,Recovering}, title_fa = {بازیافت دی اکسید تیتانیم از لجن رنگ پایه حلال (مطالعه موردی: شرکت ایران خودرو)}, abstract_fa = {لجن رنگ پایه حلال تولید شده در صنایع خودروسازی، به علت وجود عناصر سنگین و حلال‌هایی نظیر تولوئن دارای آلودگی بالا است و به همین دلیل، دفع صحیح آن با مشکلات زیادی روبرو است. روش‌های متعددی جهت کاهش آثار زیست محیطی پساب این صنایع توسعه یافته است، ولی مطالعه بر روی روش‌های ساده، سریع و ارزان قیمت در این زمینه ضروری می‌باشد. در این راستا، تحقیق حاضر به بررسی میزان آلایندگی لجن رنگ پایه حلال، کاهش آلودگی در سطح استانداردهای زیست‌محیطی و بهینه‌سازی فرآیند بازیافت فلزات از پساب، ترکیب دی اکسید تیتانیم را که رنگدانه اصلی اتومبیل بوده و بازیافت آن می‌تواند صرفه‌جویی اقتصادی قابل توجه‌ای را در پی داشته باشد، می‌پردازد. بنابراین با نمونه‌برداری از لجن پساب سالن رنگ شرکت ایران خودرو و به‌کارگیری روش‌های شناورسازی و الکترولیز، استخراج دی اکسید تیتانیوم از آن انجام گرفت. لازم به ذکر است جهت تعیین مقدار اکسید تیتانیم در کلیه نمونه‌ها از دستگاه XRF استفاده شده است. با توجه به نتایج تحقیق فوق، روش الکترولیز با دستیابی به تیتانیم 70 درصد، از بین روش‌های به کار گرفته شده، بهترین روش برای بازیافت دی اکسید تیتانیم با خلوص بالاتر تشخیص داده شد.}, keywords_fa = {لجن رنگ پایه حلال,دی اکسید تیتانیم,الکترولیز,بازیافت}, url = {https://jcst.icrc.ac.ir/article_76057.html}, eprint = {https://jcst.icrc.ac.ir/article_76057_61ae421b92a550909ad61ff44fbbbde1.pdf} } @article { author = {Mafi, M. and Shams-Nateri, A.}, title = {Dye Concentration Estimation in Bicomponent Solution by Neural Network Based Scanner}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {247-251}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Spectrophotometeric technique is common method for measuring concentrations in dye mixture solution, but there are several problems and disadvantages in this technique. Therefore, application of inexpensive and uncomplicated methods is desirable. This research explains a new method for dye concentration measurement by a scanner. In this method neural network is used to make relationship between scanner RGB values and dye concentration in mixture. Then, this new method is compared with normal spectrophotometric method. The obtained results indicate that the performance of neural network based scanner method is comparable with normal spectrophotometric method.}, keywords = {Estimation,Dye concentration,Bicomponent solution,Spectrophotometeric,Neural Network}, title_fa = {استفاده از شبکه عصبی در تخمین غلظت رنگزا در محلول‌های دوجزیی با پویشگر}, abstract_fa = {روش متداول به منظور تعیین غلظت اجزای محلول مواد رنگزا جذب‌سنجی می‌باشد. اما این روش دارای مشکلات و محدودیت‌هایی می‌باشد. بنابراین استفاده از روش‌های ارزان‌تر و آسان‌تر بسیار مطلوب می‌باشد. این کار تحقیقاتی روش جدیدی را برای اندازه‌گیری غلظت محلول مواد رنگزا به کمک پویشگر بیان می‌نماید. در این روش از شبکه عصبی برای برقراری ارتباط بین پارامترهای رنگی RGB تصویر محلول اسکن شده و غلظت رنگزا استفاده گردید. در ادامه قابلیت پیشگویی روش استفاده از پویشگر با روش معمولی اسپکتروفوتومتری مورد مقایسه قرار گرفت. نتایج حاصله بیانگر قابلیت خوب روش در مقایسه با روش معمولی می‌باشد.}, keywords_fa = {تخمین,غلظت رنگزا,محلول‌های دوجزیی,اسپکتروفوتومتری,شبکه عصبی}, url = {https://jcst.icrc.ac.ir/article_76058.html}, eprint = {https://jcst.icrc.ac.ir/article_76058_a2f02a552dc08bd71638e317c9545e28.pdf} } @article { author = {Gharanjig, K. and Khosravi, A. and Niknam, V. and Ahmadi, A. and Hossein nezhad, M.}, title = {Investigation of Dissolution and Dyeing Properties of a Disperse Dye in the Presence of Tween Environmentally Friendly Dispersing Agents}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {253-261}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, dissolution of a disperse dye in the presence of Tween 20 and Tween 80 and the effect of various parameters such as time, temperature and concentration of dispersing agents were investigated. In addition, dissolution kinetics of disperse dye in the presence of selected dispersing agents in various temperatures were studied. Results show that dissolution kinetics of the disperse dye follows an exponential equation. The rate of dissolution of disperse dye in the presence of Tween 80 is greater than Tween 20. The performance of Tween 80 and Tween 20 in dyeing of polyester fibers with disperse dye were studied and compared with the performance dispertane MF as a commercial dispersing agent. Results show that the performance of Tween 80 is almost equal to Dispertane MF.}, keywords = {Environmentally friendly dispersing agent,Tween,Dissolution,Kinetics,Disperse dye}, title_fa = {بررسی انحلال و خواص رنگرزی یک ماده رنگزای دیسپرس در حضور مواد پراکنش‌‌کننده زیست‌سازگار توئین}, abstract_fa = {در این تحقیق انحلال یک ماده رنگزای دیسپرس در حضور محلول‌های آبی توئین 20 و توئین 80 مورد بررسی قرار گرفته و اثر عوامل مختلفی مانند زمان، دما و غلظت پراکنش‌کننده‌ها بر روی میزان انحلال ماده رنگزا در آب ارزیابی گردیده است. ضمن اینکه سینتیک انحلال ماده رنگزا در دماهای مختلف و با حضور پراکنش‌کننده‌های انتخابی مطالعه شده است. نتایج نشان می‌دهند که با افزایش زمان، دما و غلظت پراکنش‌کننده‌ها میزان انحلال ماده رنگزا در آب افزایش می‌یابد و سینتیک انحلال از یک تابع نمایی پیروی می‌کند. همچنین، انحلال ماده رنگزا در محیط حاوی توئین 80 نسبت به توئین 20 از سرعت بیشتری برخوردار است. عملکرد توئین 20 و توئین 80 در رنگرزی الیاف پلی‌استر با ماده رنگزای دیسپرس بررسی شده و عملکرد آن با خواص رنگرزی کالاهای رنگرزی شده در حضور یک پراکنش‌کننده تجارتی به نام پراکنش‌کننده MF مقایسه گردیده است. نتایج نشان می‌دهند که ویژگی‌های توئین 80 به پراکنش‌کننده MF بسیار نزدیک است.}, keywords_fa = {پراکنش‌کننده زیست‌سازگار,توئین,انحلال,سینتیک,ماده رنگزای دیسپرس}, url = {https://jcst.icrc.ac.ir/article_76059.html}, eprint = {https://jcst.icrc.ac.ir/article_76059_191acc90218f2552d72c6ab9a8710fd4.pdf} } @article { author = {Mousaei, M. and Faghihi Sani, M.A. and Baghshahi, S. and Ehsani, M.}, title = {Hydrothermal Synthesis of CoAl2O4 Blue Nano Structure Pigment}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {263-270}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, in order to synthesize nano structure cobalt aluminate pigments hydrothermal method was used. First, appropriate amounts of CoCl2.6H2o and AlCl3.6H2 were disolved in distilled water and titrated by 3M NaOH and NaOH/Na2CO3 mineralizers with the molar ratio of 1:3 in order to achieve desired pH. Then samples were put into a teflon lined stainless steel autoclave and hydrothermally treated at different temperatures and times. Finally, the prepared precipitates were washed with distilled water, filtered and dried at 80oC. The powders were analyzed for the formed phases, colorimetry, and morphology and particle size distribution by XRD, CIELab, SEM and TEM. The XRD results showed that by increasing time and temperature of hydrothermal treatment, CoAl2O4 formed in expense of Co-Al-LDH and AlO(OH) phases. Also, by increasing hydrothermal time in a fixed temperature (245oC), because of decreasing Co-Al-LDH and formation of CoAl2O4, a* parameter decreased and b* parameter (representing blue color) became more negative. L* parameter also increased by increasing purity of the samples. Thus, the sample synthesized at 245oC for 24 hr with NaOH/Na2CO3 mineralizer was selected as the optimum sample. TEM analysis showed that the size of grains were about 100-150nm. Also particle size distribution results and SEM images showed agglomeration of particles in different hydrothermal times.}, keywords = {pigment,Hydrothermal,Cobalt aluminate,Spinel}, title_fa = {ساخت رنگدانه نانوساختار آبی آلومینات کبالت به روش هیدروترمال}, abstract_fa = {در این تحقیق به منظور ساخت رنگدانه نانو ساختار آلومینات کبالت روش هیدروترمال انتخاب شد. ابتدا مقادیر مناسبی از CoCl2.6H2O و AlCl3.6H2O در آب مقطر حل شد و سپس با کانی‌سازهای NaOH سه مولار و NaOH/Na2CO3 با نسبت مولی 1 به 3 تیتر شد تا pH به مقدار مورد نظر رسید. آنگاه نمونه حاصل، داخل اتوکلاو از جنس فولاد ضد زنگ با جداره داخلی تفلون، قرار داده شد و در دماها و زمان‌های مختلف تحت عملیات هیدروترمال قرار گرفت. در نهایت رسوب حاصل با آب مقطر شستشو، صاف و در دمای oC80 خشک شد. پودر به دست آمده برای شناسایی فازی، رنگ‌سنجی و ریزساختار تحت آزمون‌های XRD، SEM ، TEM و رنگ‌سنجی قرار گرفت. نتایج XRD نشان داد با افزایش زمان و دمای عملیات هیدروترمال، فاز CoAl2O4 به قیمت از بین رفتن فازهای Co-Al-LDH و AlO(OH) تشکیل شد. هم‌چنین با افزایش زمان عملیات هیدروترمال، در دمای ثابت oC 245 به علت کاهش فاز Co-Al-LDH و تشکیل فاز CoAl2O4، a* کم و پارامتر b* منفی‌تر شده که نشان‌دهنده رنگ آبی است. پارامتر L* نیز با افزایش خلوص نمونه افزایش یافت. بنابراین نمونه ساخته شده در دمای ثابت oC 245 و زمان 24 ساعت با کانی‌ساز NaOH/Na2CO3 به عنوان نمونه بهینه انتخاب شد. تصاویر TEM نشان داد که اندازه دانه‌ها 200-150 نانومتر است. همچنین نتایج توزیع اندازه ذرات و تصاویر SEM از پودرهای ساخته شده در زمان‌های مختلف عملیات هیدروترمال کلوخه‌شدن را نشان داد.}, keywords_fa = {رنگدانه,هیدروترمال,آلومینات کبالت,اسپینل}, url = {https://jcst.icrc.ac.ir/article_76060.html}, eprint = {https://jcst.icrc.ac.ir/article_76060_6b983f2c7d442bcf4b2919d69f8c0196.pdf} } @article { author = {Zamani, Y. and Mohseni, M. and Bastani, S. and Rostami, M.}, title = {Surface Modification of Nanosilica with an Acrylic Silane Coupling Agent: The Role of Processing on the Surface Chemistry of Particles}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {271-282}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In order to modify the nanosilica surface from hydrophilic to hydrophobic one, and to have a better. dispersion of nanosilica in a non-polar media, nano silica surface treatment using methacryloxy propyl trimethoxy silane was performed. In this study three independent variables were explored. These factors included silane coupling agent concentration, bath pH and hydrolysis ratio. Particle analysis was performed to investigate the surface behavior of the treated nanosilica. pH of particles was determined in a mixture of water and ethanol. Apparent densities were measured using a Helium Pycnometer. FTIR Spectroscopy was used to study the surface chemistry of the treated nanosilica. Thermogravimetric analysis (TGA) and elemental analysis were employed to illustrate the quantitative amounts of grafted silane on the surface. It was revealed that pH of particles changed from 3.8 for pristine silica to 4.9 and 6.9 for the lowest and the highest grafted particles respectively. The results indicated that the silane/silica concentration had a strong effect on the grafting of silane on the silica surface. Based on the elemental analysis, carbon content of treated silica in different condition of experiments changed between 1.2 and 7.8 percent.}, keywords = {nano silica,Surface modification,Acrylic silane,Surface chemistry}, title_fa = {اصلاح سطحی نانو سیلیکا با جفت‌شونده اکریلیک سیلانی: تأثیر شرایط واکنش آمایش سطحی روی شیمی سطح ذرات اصلاح شده}, abstract_fa = {به منظور کاهش میزان آب‌دوستی نانو سیلیکا و داشتن قدرت پراکنش بهتری از آن در محیط‌های غیرقطبی، سطح آن توسط اکریلیک سیلان مورد اصلاح قرار گرفته است. شرایط تجربی آمایش سطحی با بررسی عواملی چون میزان جفت‌شونده، pH واکنشی و نسبت آبکافت مورد مطالعه قرار گرفت. آزمون‌های شناسایی ذراتی که به صورت پودر درآمدند شامل، pH ذرات در مخلوطی از آب و اتانول، چگالی ظاهری توسط هلیوم پیکنومتر، طیف‌سنجی زیر قرمز جهت بررسی شیمی سطح ذرات، آنالیز وزن‌سنجی حرارتی و آنالیز عنصری جهت تعیین کمی میزان عناصر روی سطح می‌باشد. بر پایه اطلاعات به دست آمده از آزمون pH، میزان pH ذرات از 3.8 برای نانو سیلیکای آمایش نشده تا 4.9 و 6.0 به ترتیب برای نانو سیلیکاهای با کمترین و بیشترین میزان آمایش به دست آمده است. نتایج به دست آمده از آنالیز عنصری نیز نشان‌دهنده تأثیر بارز غلظت سیلان روی میزان آمایش ذرات است. درصد کربن نمونه‌های اصلاح شده نیز بین 1.2 تا 7.8 متغیر می‌باشد.}, keywords_fa = {نانو سیلیکا,اصلاح سطحی,اکریلیک سیلان,شیمی سطح}, url = {https://jcst.icrc.ac.ir/article_76061.html}, eprint = {https://jcst.icrc.ac.ir/article_76061_3740b23b075fefb41c5466fe17f44834.pdf} } @article { author = {Shirkavand Hadavand, B. and Nourmohammadian, F. and Yousefi, A.A.}, title = {Synthesis and Characterization of a Sorbitol Based Clarifying Agent and Investigation of Its Effects on the Optical Properties of Polypropylene}, journal = {Journal of Color Science and Technology}, volume = {6}, number = {3}, pages = {283-289}, year = {2012}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, synthesis of a sorbitol based additive is reported which nowadays is used as a nucleating agent, also its effects on clarifying of polypropylene as a highly used material in plastic industry are investigated. The chemical structure of the additive was approved using IR and 1H NMR spectroscopy. Moreover, the appropriate performance of the additive as a nucleating agent in crystallization properties of polypropylene was revealed by differential scanning calorimetry (DSC). Measurement of color attributes and spectral reflectance and transmittance of the clarified polypropylene samples showed that all samples were colorless. In addition, characterization of the optical properties of the samples showed a 12.5 % and 33 % decrease in opacity and haze of the clarified samples, respectively.}, keywords = {Clarifying agent,Nucleating agent,Crystallization,Sorbitol,polypropylene}, title_fa = {سنتز و شناسایی یک عامل شفاف‌کننده بر پایه سوربیتول و بررسی اثر آن بر خواص نوری پلی‌پروپیلن}, abstract_fa = {در این پ‍ژوهش به سنتز نوع جدیدی از افزودنی بر پایه سوربیتول که امروزه برای شفاف‌کردن و یا به عنوان عامل هسته‌زا مورد استفاده قرار می‌گیرند پرداخته شده است و اثرات آن بر شفافیت پلی‌پروپیلن به عنوان یکی از مواد پرمصرف در صنایع پلاستیک مورد بررسی قرار گرفته است. ساختار شیمیایی این افزودنی با استفاده از طیف‌سنجی FT-IR و 1H NMR تایید شد. نتایج به دست آمده از آزمون DSC ماده سنتز شده خواص مناسب آن را به عنوان یک ماده شفاف‌کننده تأیید نمود. آزمون‌های مقادیر مؤلفه‌های محرکه‌های رنگی، انعکاس و عبور نور اندازه‌گیری شد و نتایج نشان‌دهنده بی‌رنگ بودن نمونه بود. همچنین پشت‌پوشی و ماتی نمونه پلیمری با افزودن شفاف‌کننده به ترتیب به میزان 12.5% و 33% کاهش را نشان دادند.}, keywords_fa = {عامل شفاف‌کننده,عامل هسته‌زا,بلوری‌شدن,سوربیتول,پلی‌پروپیلن}, url = {https://jcst.icrc.ac.ir/article_76062.html}, eprint = {https://jcst.icrc.ac.ir/article_76062_11cd9613a41493b7b37f322a2c210ec7.pdf} }