@article { author = {Hashemian, S.}, title = {Removal of Methyl Violet by Adsorption onto Bentonite with Copper Ferrite Nano-Particles}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {191-197}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Adsorption of a basic dye-methyl violet (MV) on bentonite clay, CuFe2O4 and /bentonite CuFe2O4 in aqueous solutions was investigated. The composite of Cu and Fe and bentonite by co-precipitation method at pH=11 was prepared. The prepared composite can be used for dye removal, and then separated. XRD result showed spinel structure for CuFe2O4. SEM image showed the particles size is about 50 nm for CuFe2O4. Effect of experimental parameters such as pH, contact time of sorbent and dye, mass of sorbent and temperature on MV removal were investigated. Maximum dye removal at pH=12 and contact time 15 min was observed. In abscence of Cu ferrite contact time of bentonite sorbent increased to 60 min. In the presence of Cu ferrite a very high rate of dye removal was observed.}, keywords = {Bentonite,Methyl violet,Adsorption,Copper ferrite nano-particles,Dye removal}, title_fa = {حذف رنگ بنفش متیل توسط جذب روی بنتونیت در حضور نانو فریت مس}, abstract_fa = {جذب رنگزای بازی بنفش متیل (MV) روی خاک بنتونیت، فریت CuFe2O4و کامپوزیت /bentonite CuFe2O4 در محلول‌های آبی بررسی شد. کامپوزیتی از مس و آهن و بنتونیت توسط روش هم رسوبی و درpH=11 تهیه گردید. کامپوزیت تهیه شده می‌تواند برای حذف رنگ در آب استفاده شود و سپس از محیط جدا گردد. نتایج XRDساختار اسپینل را برای فریت CuFe2O4 نشان داد. تصویر میکروسکوپی SEM اندازه ذرات حدود 50 نانومتر را برای کامپوزیت /bentonite CuFe2O4 نشان داد. اثر پارامترهای تجربی مختلف نظیر pH، زمان تماس جاذب و رنگ، وزن جاذب و دما در میزان حذف رنگ بنفش متیل بررسی شد. بیش‌ترین درصد حذف رنگ در pH=12 و در زمان تماس 15 دقیقه صورت گرفت. در غیاب فریت مس زمان تماس برای جاذب بنتونیت به 60 دقیقه افزایش می‌یابد. در حضور فریت مس سرعت بسیار زیادی برای حذف رنگ مشاهده گردید.}, keywords_fa = {بنتونیت,متیل ویولت,جذب,نانو فریت مس,حذف رنگزا}, url = {https://jcst.icrc.ac.ir/article_75986.html}, eprint = {https://jcst.icrc.ac.ir/article_75986_a825e7b3c0c09131aa7925c00b4b05bc.pdf} } @article { author = {Salehi, R. and Arami, M. and Mahmoodi, N.M. and Bahrami, S.H.}, title = {Acid Dyes Removal Using Chitosan in Single and Binary Systems}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {199-206}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {It is now recognized that adsorption using low-cost adsorbents is an effective and economic method for water decontamination. Chitosan is derived by deacetylation of the naturally occurring biopolymer chitin which is the second most abundant polysaccharide in the world after cellulose. In this paper removal of two anionic dyes from textile effluent in both singular and binary systems is investigated. Direct Blue 78 and Acid Black 26 was used as anionic dye models. The surface characteristics of chitosan were investigated using Fourier transform infra-red spectroscopy and scanning electron microscopy. The influence of process variables such as adsorbent dosage and pH were studied. Results indicate that chitosan could be used as a biosorbent to remove the anionic dyes from contaminated watercourses in both singular and binary pollutants systems}, keywords = {Dye removal,Chitosan,Binary system,Colored textile wastewater,anionic dye}, title_fa = {رنگبری رنگزاهای اسیدی با استفاده از کیتوسان در سیستم‌های یک جزئی و دو جزئی}, abstract_fa = {امروزه به منظور حذف آلودگی آب، از جاذب‌های ارزان قیمت استفاده می‌گردد. کیتوسان با دی‌استیله کردن بیوپلیمرکیتین به دست می‌آید و کیتین از نظر فراوانی در جهان دومین پلی‌ساکارید بعد از سلولز است. در این تحقیق رنگبری دو رنگزای آنیونی از پساب‌های نساجی در سیستم‌های یک جزئی و دو جزئی انجام شده است. رنگزای مستقیم آبی 78 (Direct Blue 78) و رنگزای اسیدی مشکی 26 (Acid Black 26) به عنوان مدل انتخاب شده است. خصوصیات سطحی کیتوسان قبل و بعد از فرآیند رنگبری با استفاده از تبدیل فوریه زیر قرمز و میکروسکوپ الکترونی پویشی ارزیابی گردید. عوامل مؤثر بر فرآیند رنگبری مانند مقدار جاذب و pH بررسی شد. داده‌ها نشان دادند که کیتوسان می‌تواند به عنوان یک جاذب برای رنگبری رنگزاهای آنیونی از پساب‌های رنگی نساجی مورد استفاده قرار گیرد.}, keywords_fa = {رنگبری,کیتوسان,سیستم دو جزئی,پساب‌های رنگی نساجی,رنگزای آنیونی}, url = {https://jcst.icrc.ac.ir/article_75987.html}, eprint = {https://jcst.icrc.ac.ir/article_75987_c86d4880eb2225811544f02aaa7ef8df.pdf} } @article { author = {Keyhan, P. and Mohseni, M. and Baghaee Rad, A.}, title = {Investigating the Role of Process Parameters in Hydrolysis of an Aminosilane Adhesion Promoter Additive in an Epoxy-Silicone Clear Coat}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {207-216}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, the effect of an adhesion promoter was investigated on the adhesion of an epoxy silicone coating. N-2 amino ethyl-3 amino propyl-3 methoxy silane was used as an adhesion promoter and was incorporated into the epoxy clear coat. The effect of the additive, using a sol-gel process on the final properties of the coating was investigated by adhesion, hardness (Vickers) and tensile measurements and DMTA analysis. The results indicated an increase in the coating adhesion in the presence of amino silane as compared to that of epoxy silicone resin. This is due to the formation of chemical bridges as a result of covalent bonding between silanols and hydroxyls at the surface. On the other hand, the formation of a three-dimensional siloxane network in the condensation process of silanols resulted in a higher crosslink density of the system and a denser network. The results showed that the use of amino silane compounds in epoxy silicone coatings can be an effective way to increase the adhesion.}, keywords = {Silane adhesion promoters,Sol-gel processing,Adhesion,Epoxy silicone}, title_fa = {نقش پارامترهای فرآیندی در آبکافت افزودنی آمینوسیلان در چسبندگی یک لاک اپوکسی ـ سیلیکون}, abstract_fa = {در این تحقیق اثر یک بهبود دهنده چسبندگی سیلیکونی بر روی چسبندگی رزین اپوکسی با سخت کننده آمینو سیلیکونی بررسی شده است. برای این منظور N -2 آمینو اتیل3 آمینو پروپیل تری‌متوکسی سیلان به عنوان افزودنی در فرمولاسیون لاک اپوکسی وارد شده و اثر آن با بهره‌گیری از فرآیند سل ژل بر خواص نهایی روکش مورد بررسی قرار گرفت. آزمون‌های چسبندگی، سختی ویکرز، کشش و آزمون مکانیکی ـ گرمایی (DMTA ) نشان‌دهنده افزایش چسبندگی روکش در حضور ترکیب آمینو سیلان نسبت به رزین اپوکسی ـ سیلیکون است. دلیل این امر به برقراری پل‌های شیمیایی در اثر ایجاد پیوندهای کووالانس بین سیلانول‌ها و هیدروکسیل‌های سطح و همچنین واکنش بین گروه آمینو سیلان با گروه اپوکسی رزین اپوکسی و گروه‌های سیلان سخت کننده ارتباط داده شد. از طرف دیگر تشکیل شبکه سه بعدی سیلوکسان در مرحله متراکم شدن سیلانول‌ها، افزایش چگالی شبکه‌ای سیستم و تراکم فیلم رنگ را سبب گردید.}, keywords_fa = {بهبود دهنده‌های چسبندگی سیلانی,فرآیند سل ژل,چسبندگی,اپوکسی سیلیکون}, url = {https://jcst.icrc.ac.ir/article_75988.html}, eprint = {https://jcst.icrc.ac.ir/article_75988_936d3e1fa0fc288ba17bae0441f1e170.pdf} } @article { author = {Mashouf, G. and Ebrahimi, M. and Bastani, S.}, title = {Investigation the Effcet of Nano Alumina on Scratch Resistance of UV Curable Urethane Acrylate}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {217-222}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Curing of relatively thin polymers via radiation in various applications such as varnishes, paints and printing inks has recently developed. Urethane acrylate resins are among the most important radiation curable resins which can be used in different industries such as automotive industry. Since scratch resistance is very important in lots of these applications, improvement of scratch resistance of mentioned coatings via incorporation of nano particles attracts a lot of interest. This study is dedicated to investigation of the effect of nano alumina particles on physical and mechanical properties of UV curable urethane acrylate, especially scratch resistance. Scratch resistance of different coatings was evaluated by nano indentation microhardness and adhesion strength of coatings have also investigated. The results depicted that the scratch work increases from 470 to 700 pJ and the elastic modulus from 1.9 to 2.3 GPa. In general, results showed improvement of urethane acrylate coating properties via addition of nano alumina.}, keywords = {Urethane acrylate,Nano alumina,Scratch resistance,UV cure}, title_fa = {بررسی اثر نانو ذرات آلومینا بر مقاومت به خراش رزین‌های یورتان اکریلات پخت شونده با UV}, abstract_fa = {امروزه پخت فیلم‌های نازک پلیمری از طریق تابش پرتو در کاربردهای متفاوتی همچون لاک، رنگ و جوهرهای چاپ بسیار گسترش یافته است. رزین‌های یورتان اکریلات یکی از مهم‌ترین رزین‌های پخت شونده با UV در صنایعی همچون صنعت خودرو بوده و از آنجا که در بسیاری از این کاربردها مقاومت در برابر خراش بالا لازم است، توجه زیادی به بهبود مقاومت در برابر خراش این پوشش‌ها از طریق افزودن نانو ذرات معطوف گردیده است. از این رو در این کار تحقیقاتی به بررسی اثر نانو ذرات آلومینا بر خواص فیزیکی و مکانیکی پوشش‌های یورتان اکریلات پخت شونده با UV، به ویژه مقاومت به خراش آن پرداخته شده است. مقاومت در برابر خراش از طریق آزمون Nano Indentation ارزیابی گردید. همچنین سختی میکرو فیلم‌های پخت شده و استحکام چسبندگی پوشش‌ها نیز مورد ارزیابی قرار گرفت. نتایج حاکی از افزایش کار خراش از حدود 470 تا 700 پیکو ژول و مدول الاستیک از 1.9 تا 2.3 گیگا پاسکال می‌باشد. به طور کلی می‌توان بیان نمود که نانو ذرات آلومینا موجب بهبود نسبی در برخی از خواص فیلم‌های یورتان اکریلات پخت شونده با UV گردیده است.}, keywords_fa = {یورتان اکریلات,نانو آلومینا,مقاومت در برابر خراش,پخت شونده با UV}, url = {https://jcst.icrc.ac.ir/article_75989.html}, eprint = {https://jcst.icrc.ac.ir/article_75989_69a53e11d9a77f598985a4a6910685b6.pdf} } @article { author = {Safi, M.}, title = {Study of Adsorption Isotherm of Nanionic Dyes on Nylon 6 Fibers}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {223-231}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Sorption isotherms of three nonionic disperse dyes, Blue 3, Red 1 and Yellow 3 on nylon 6 fibers were studied at 90 and 98C. A remarkable deviation from Nernst trend was obtained for all cases. Performance of Dual-Mode sorption model which is consisting of Langmuir mechanism for covering of initial curvature zone and Nernst model for the later nearly linear part was tested. Dual-Mode fitting was appeared to be in good agreement with experimental data. In addition, temperature effect on Dual-Model isotherm and on saturation point of fiber at two selected temperature was compared. The results showed the capacity of fiber for solution sorption is increased by increasing the temperature; however an important part of the total sorption was still followed as Langmuir isotherm.}, keywords = {Disperse dye,Nylon 6,Sorption isotherm,Nernst,Dual-Mode,Langmuir}, title_fa = {بررسی جذب هم دمای مواد رنگزای دیسپرس روی الیاف نایلون 6}, abstract_fa = {در این تحقیق جذب هم‌دمای سه ماده رنگزای غیریونی دیسپرس آبی 3، قرمز 1 و زرد 3 بر روی الیاف نایلون 6 در دو دمای 90 و 98 درجه سانتی‌گراد مطالعه شده است. در همه موارد انحراف مشخصی از جذب هم‌دما نرنست مشاهده شد. کارآیی جذب هم‌دما دو حالته (Dual-Mode) که مرکب از دو مکانیسم جذب در مکان‌های مشخص (لانگمیور) و انحلال (نرنست) می‌باشد، بررسی شد. مشاهده شد که در مقایسه با معادله جذب نرنست، معادله جذب دوحالته با نتایج تجربی از تطابق بالاتری برخوردار است. علاوه بر آن، نتایج تأثیر عامل دما بر روی جذب هم‌دما دوحالته نشان داد که با افزایش دما حد اشباع لیف افزایش یافته و فضای بیشتری در بستر لیفی برای انحلال رنگزا به وجود می‌آید. اگرچه وقوع چنین حالتی خود منجر به افزایش مقدار جذب طی ساز و کار نرنست می‌شود، هنوز هم سهم زیادی از جذب از طریق جذب در مکان‌های مشخص و به شکل هم‌دما لانگمیور رخ می‌دهد.}, keywords_fa = {رنگزای دیسپرس,نایلون 6,جذب هم‌دما,نرنست,دوحالته,لانگمیور}, url = {https://jcst.icrc.ac.ir/article_75990.html}, eprint = {https://jcst.icrc.ac.ir/article_75990_95f17c20009ba3122dc279b1497bd343.pdf} } @article { author = {Hossein nezhad, M. and Khosravi, A. and Gharanjig, K. and Moradian, S.}, title = {The Synthesis, Application and Investigation Properties of Two New Acid Dyes Based on Naphthalimide}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {233-243}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Two novel monoazo acid dyes based on naphthalimide have been synthesized utilizing 4-amino-N-methyl(butyl)-1,8-naphthalimide as the diazo components and J-acid as the coupling component. The 4-amino-N-alkyl(methyl/butyl)-1,8- naphthalimides were diazotized with nitrosylsulphuric acid and afterwards they were coupled with J-acid. All obtained monoazo acid dyes were characterized using DSC, FTIR, 1HNMR and elemental analysis. In order to study and compare their dyeing properties and UV-visible spectroscopy, two monoazo acid dyes based on azobenzene have also been synthesized utilizing aniline and p-nitroaniline as the diazo components and J-acid as the coupling component. Spectrophtometric properties of the synthesized dyes were investigated in different solvents and their halochromic behaviors were considered. Finally, the polyamide and wool fibers were dyed by two monoazo acid dyes and then fastness properties were investigated. The data showed that all monoazo acid dyes have dyed fibers with good dyeing properties and all synthesized acid dyes have excellent wash fastness, good milling and perspiration fastness and poor light fastness.}, keywords = {Naphthalimide,dyeing,Azobenzene,Bathochromic,Solvatochromic}, title_fa = {سنتز، کاربرد و بررسی خواص دو ماده رنگزای اسیدی جدید بر پایه نفتالیمید}, abstract_fa = {دو ماده رنگزای مونو آزو اسیدی بر پایه نفتالیمید با به کار بردن 4-آمینو-N-متیل (بوتیل)-1، 8-نفتالیمید به عنوان جزء دی‌آزوته شونده و -J اسید به عنوان جزء جفت شونده سنتز شدند. مشتقات 4-آمینو N-آلکیل-8،1-نفتالیمید با استفاده از نیتروزیل سولفوریک اسید دی‌آزوته شد و با –J اسید جفت گردید. هر دو ماده رنگزای سنتز شده خالص‌سازی و به روش‌های دستگاهی مختلف از قبیل 1HNMR، FTIR، DSC و آنالیز عنصری شناسایی شدند. برای مقایسه و بررسی خواص رنگرزی و اسپکتروفوتومتری مواد رنگزای اسیدی بر پایه نفتالیمید، دو ماده رنگزای آزوبنزن با به کار بردن آنیلین و پارا نیتروآنیلین به عنوان اجزاء دی‌آزوته شونده و -J اسید به عنوان جزء جفت شونده سنتز شدند. خواص اسپکتروسکوپی مواد رنگزای سنتز شده در حلال‌های مختلف و اثر هالوکرومیسم آنها بررسی گردید. در نهایت مواد رنگزای سنتز شده بر روی الیاف پلی‌آمید و پشم به کار رفتند و سپس خواص ثباتی مورد بررسی قرار گرفت. نتایج نشان دادند که مواد رنگزای سنتز شده قابلیت رنگرزی خوبی بر روی این الیاف دارند و دارای ثبات شستشویی عالی، ثبات تعرق و میلینگ خوب و ثبات نوری ضعیف هستند.}, keywords_fa = {نفتالیمید,رنگرزی,آزو بنزن,باتوکرومیک,سولواتوکرومیک}, url = {https://jcst.icrc.ac.ir/article_75991.html}, eprint = {https://jcst.icrc.ac.ir/article_75991_4d0c3f663e212217aa234cd3b14f2469.pdf} } @article { author = {Talatori, F. and Baghshahi, S. and Rajabi, M.}, title = {The Effect of Praseodymium Oxide Content and Substituting Iranian Rice Husk with Silica on (Pr,Zr)SiO4 Pigment}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {4}, pages = {245-252}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research various compositions of (Pr,Zr)SiO4 were synthesized and the effect of praseodymium content and replacing Iranian rice husk with silica was investigated. The samples were calcined at 1050oC and then washed and milled. One of the interesting results of the research is that the variation in praseodymium oxide content, did not considerably alter the L*a*b* coordinates. As a result, it is possible to produce more economical pigments using less amount of this oxide. Furthermore, by substituting rice husk ash with silica the yellow component of the pigments decreased, which is probably owing to the impurities of the rice husk ash, which in this case may be removed by washing with acid. The XRD results showed the formation of ZrO2 and ZrSiO4 which regarding the yellowish color of the pigments, it may be concluded that praseodymium has entered the structure as solid solution.}, keywords = {pigment,Yellowish,Praseodymium,Rice husk}, title_fa = {اثر میزان اکسید پرازدیمیم و جایگزینی سیلیس با خاکستر سبوس برنج ایرانی بر رنگدانه (Pr,Zr)SiO4}, abstract_fa = {در این تحقیق ترکیبات متفاوتی از رنگدانه (Pr,Zr)SiO4 ساخته شد و تأثیر میزان اکسید پرازدیمیم و جایگزینی سبوس برنج کلسینه شده ایرانی به جای سیلیس معدنی مورد بررسی قرار گرفت. نمونه‌ها در دمای oC1050 کلسینه شدند و سپس عملیات شستشو و آسیاب انجام شد. از نتایج جالب این تحقیق این است که تغییر درصد اکسید پرازدیمیم تغییر چندانی در مختصات L*a*b* نمونه‌‌ها ایجاد نکرد که در نتیجه آن می‌توان رنگدانه‌هایی اقتصادی با درصد کم‌تر این اکسید هزینه‌بر ساخت. در ضمن با جایگزین کردن سیلیس با خاکستر سبوس برنج در ترکیبات از زردی رنگدانه‌ها کاسته شد که احتمالاً این امر ناشی از ناخالصی‌های موجود در خاکستر حاصل از سبوس است که در این صورت می‌توان آنها را با اسیدشویی حذف کرد. نتایج XRD نشان دهنده تشکیل فازهای ZrO2 و ZrSiO4 است که با توجه به رنگ زرد حاصل می‌توان نتیجه گرفت که پرازدیمیم به صورت محلول جامد وارد ساختارهای فوق شده است.}, keywords_fa = {رنگدانه,زردی,پرازدیمیم,سبوس برنج}, url = {https://jcst.icrc.ac.ir/article_75992.html}, eprint = {https://jcst.icrc.ac.ir/article_75992_6fc602eb82802147666d2b2855e87fc3.pdf} }