@article { author = {Mahdavian ahadi, M. and Ashhari, Sh.}, title = {Evaluation of Corrosion Inhibition of Mercapto Functional Compounds for Mild Steel in 1M Hydrochloric Acid Solution During Immersion Time}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {65-70}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Corrosion inhibition effect of 2-mercaptobenzimidazole (MBI) and 2-mercaptobenzoxazole (MBO) compounds on steel in hydrochloric acid solution was investigated by electrochemical impedance spectroscopy (EIS) and it was observed that both of these compounds have corrosion inhibition effect on mild steel. Evaluation of electrochemical behavior in test solutions showed that by increasing the immersion time from 15 to 300 min corrosion resistance of samples are increased and at the same immersion time MBI have the better corrosion inhibition in comparison to MBO. Quantum chemical calculations were performed using Hyperchem7 software for MBI and MBO. The results of calculations showed superior inhibition efficiency of MBI in comparison to MBO, which could be attributed to the more negative charge of pyrole-like nitrogen atom in comparison to oxygen atom. This can cause easier protonation and consequently adsorption on the metal surface occurs easily.}, keywords = {Corrosion inhibitors,electrochemical impedance spectroscopy,Hydrochloric acid,Mild steel}, title_fa = {بررسی بازدارندگی خوردگی ترکیبات دارای گروه مرکاپتو جهت فولاد نرم در محلول اسید کلریدریک 1 مولار طی زمان غوطه‌وری}, abstract_fa = {اثر بازدارندگی خوردگی ترکیبات 2- مرکاپتو بنز ایمیدازول (MBI) و 2- مرکاپتو بنز اوکسازول (MBO) بر روی فولاد نرم در محیط اسیدکلریدریک به کمک آزمون طیف‌سنجی امپدانس الکتروشیمیایی (EIS) بررسی شد و مشاهده شد که هر دوی این ترکیبات دارای اثر بازدارندگی خوردگی بر روی فولاد نرم می‌باشند. بررسی رفتار الکتروشیمیایی فولاد نرم در محلول‌های آزمون نشان داد که با افزایش زمان‌ها‌ی غوطه‌وری از 15 تا 300 دقیقه مقاومت در برابر خوردگی نمونه‌ها بیشتر می‌شود و در زمان‌ها‌ی غوطه‌وری یکسان MBI دارای بازدارندگی خوردگی بهتری نسبت به MBO می‌باشد. محاسبات شیمی کوانتوم برای MBI و MBO توسط نرم‌افزار Hyperchem7 انجام شد. نتیجه محاسبات نشان داد عملکرد بازدارندگی بهتر MBI نسبت به MBO می‌تواند به سبب بار منفی اتم نیتروژن پایرولی نسبت به اتم اکسیژن صورت گرفته باشد. این موضوع پروتونه شدن این ترکیبات را تسهیل می‌نماید و به دنبال آن جذب روی سطح فلز راحت‌تر صورت می‌پذیرد.}, keywords_fa = {بازدارنده خوردگی,طیف‌سنجی امپدانس الکتروشیمیایی,اسیدکلریدریک,فولاد نرم}, url = {https://jcst.icrc.ac.ir/article_75972.html}, eprint = {https://jcst.icrc.ac.ir/article_75972_181b03e6799e830fe807f50c19a9843c.pdf} } @article { author = {Rostami, M. and Mohseni, M. and Ranjbar, Z.}, title = {Surface Treatment of Nano Silica with an Amino Silane: The Effect of Treating Bath pH on the Surface Chemistry and Performance of Particle}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {71-82}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this work nano silica was treated by an amin silane at different pH conditions and analysed using different techniques. It was found that the pH of treating bath highly affected the grafting of silane on the surface leading to grafting ratios between 29 and 58 percent. The zeta potentials changed from -7.1 mv for pristine silica to +5.5 mv and +18.01 mv for the lowest and the highest grafted particles respectively. The results showed that, the sample with higher grafting has better dispersion stability in solvents with higher hydrogen bonding parameter and lower polar parameter. The higher mechanical properties of the nano clear coats using a polyurethane filled with these particles may confirm the better dispersion and possibility of a physico-chemical interaction between the surface modified silica and the matrix. The tensile strength, elongations at yield and break and micro indentation hardness as well as the Young modulus were used to show the improvement achieved in properties of modified particles containing resin.}, keywords = {nano silica,surface treatment,Amino silane,Zeta potential,Indentation hardness}, title_fa = {آمایش نانو سیلیکا با آمینوسیلان: بررسی اثر pH واکنش بر خواص سطحی و کاربردی ذره}, abstract_fa = {در این تحقیق نانو سیلیکا تحت شرایط مختلف pH با یک آمینو سیلان آمایش گردید و ذرات حاصله توسط آزمون‌های دستگاهی مختلف مورد مطالعه قرار گرفتند. نتایج حاکی از تأثیر بارز pH آمایش روی میزان واکنش سیلان با سطح ذرات است که این میزان بین 29 تا 58 درصد متغیر است. پتانسیل زتا ذرات از 7.1– میلی ولت برای نانو سیلیکا تا 5.5+ و 18.01+ به ترتیب برای نانو سیلیکاهای با کمترین و بیشترین میزان آمایش به دست آمد. نتایج نشان داد که نمونه‌های با میزان سیلان بیشتر پایداری پراکنش بهتری در حلال‌های با پارامتر پیوند هیدروژنی بیشتر و پارامتر قطبی کمتر دارند. خواص مکانیکی بهتر نانو پوشش‌های تهیه شده با رزین پلی‌یورتان حاوی این ذرات حاکی از پراکنش بهتر و احتمال واکنش فیزیکی ـ شیمیایی بین ذرات آمایش شده و ماتریس رزین است. قدرت کشش، افزایش طول در نقطه تسلیم و شکست، سختی دندانه‌ای در مقیاس ماکرو و مدول یانگ برای نشان دادن تأثیر مثبت ذرات آمایش شده با سیلان در رزین مورد بررسی قرار گرفتند.}, keywords_fa = {نانو سیلیکا,آمایش سطحی,آمینو سیلان,پتانسیل زتا,سختی دندانه‌ای}, url = {https://jcst.icrc.ac.ir/article_75973.html}, eprint = {https://jcst.icrc.ac.ir/article_75973_a04272e814021e4c8c945a4179a0f58c.pdf} } @article { author = {Moradi Rufchahi, E. and Yazdanbakhsh, M. R.}, title = {Synthesis of 6- Halo - 4- hydroxyl- 2- quinolone and Their Azo Disperse Dyes}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {83-90}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Dianilides 1 and 2 derived from concerned substituted anilines were transformed to corresponding coupling components 3 and 4 in good yields using melted AlCl3.These compounds were coupled with diazotized aryl and heteroaryl amines to give to corresponding azo dyes 5a-d and 6a-d. The structure of the new azo dyes was confirmed by UV-Vis, FT-IR, 1H NMR spectroscopic techniques. The solvatochromism of dyes was evaluated with respect to wavelength of maximum absorption (λmax) in six solvents: acetic acid, ethanol, chloroform, acetonitrile, dimethyl sulfoxide and dimethyl formamide. The color of the dyes is discussed with respect to the nature of cyclic and heterocyclic ring and substituents therein. The effects of acid and base on the visible absorption spectra of the dyes are also reported.}, keywords = {Azo Dyes,Heterocyclic coupling component,Solvatochromism,Tautomerism}, title_fa = {سنتز جفت شونده‌های انولی 6- هالو-4- هیدروکسی-2-کینولون و مواد رنگزای آزوی جدید برپایه آنها}, abstract_fa = {دی آنیلیدهای 1و 2 از آمین‌های مربوطه تهیه شده و پس از عمل حلقه‌زایی در حضور آلومینیوم کلرید مذاب، جفت‌شونده‌های انولی 3 و 4 با بازده مناسب به دست آمدند. این جفت شونده با نمک‌های دی آزونیوم یک سری آمین‌های آروماتیک و هترو آروماتیک جفت و رنگینه‌های آزوی a-d 5 و a-d 6 به دست آمدند. ساختار رنگـینه‌های حـاصل تـوسط طیف‌سنجی FT-IR، 1H NMR و UV-Vis اثبات شدند. اثر حلال‌های استیک اسید، اتانل، کلروفرم، استو نیتریل، دی متیل سولفوکسید و دی متیل فرمامید، اسید، باز و طبیعت آمین دی آزوته شونده روی موقعیت طول موج جذبی رنگینه‌های حاصل مورد بررسی قرار گرفتند.}, keywords_fa = {مواد رنگزای آزو,جفت‌شونده‌های هتروسیکل,حلال‌پوشی,توتومری}, url = {https://jcst.icrc.ac.ir/article_75974.html}, eprint = {https://jcst.icrc.ac.ir/article_75974_3f40d973baaa874b67b488d99d64b7ce.pdf} } @article { author = {Bastani, S. and Pishvaei, M. and Jalili, M. and Sorooshnia, Sh.}, title = {The Effect of Pigment Concentration and Particle Size Distribution on the Rheological Behavior of Lithography Inks}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {91-103}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, a lithography ink formulation based on the Maleic and Alkyd resin has been prepared and its rheological parameters such as viscosity vs. shear rate, thixotropy cycle, storage and loss modules and dynamic viscosity were studied. It was observed that viscosity values augmented severely by increasing the pigments concentration and reducing the particle size distribution. Time dependence thixotropy values were significant in samples containing small particle size and high pigment concentration. Structural networking and association of carbon black particles as well as particle-particle and particle-binder interaction are reasons for this behavior. Storage and loss modules were increased with reduction of particle size and/or increasing of pigment concentration. Besides, the differences between dynamic parameters in low frequencies were obvious.}, keywords = {Lithography ink,Particle size distribution,concentration,Rheology,Viscosity,Thixotropy,modulus}, title_fa = {تأثیر غلظت و توزیع اندازه ذرات رنگدانه بر رفتار رئولوژیکی مرکب‌های لیتوگرافی}, abstract_fa = {در این مقاله، مرکب چاپ لیتوگرافی بر پایه رزین‌های مالئیک و آلکیدی تهیه شده و سپس پارامترهای رئولوژیکی از قبیل گرانروی برشی، تیکسوتروپی، مدول‌های ذخیره و اتلاف و گرانروی دینامیکی مطالعه شده است. مشاهده شد که مقادیر گرانروی با افزایش غلظت رنگدانه و کاهش توزیع اندازه ذرات شدیداً افزایش می‌یابند. میزان تیکسوتروپی یا وابستگی به زمان در نمونه‌های با ذرات ریزتر و نیز نمونه‌هایی که در آنها درصد رنگدانه افزایش داشته قابل توجه می‌باشد. این رفتار نتیجه ساختار شبکه‌ای و تجمعی ذرات کربن بلک و نیز برهم‌کنش‌های آنها با یکدیگر و با رزین می‌باشد. با کاهش اندازه ذرات و یا افزایش غلظت رنگدانه، مدول‌های ذخیره و اتلاف هر دو افزایش می‌یابند. همچنین اختلاف بین پارامترهای دینامیکی در فرکانس‌های پایین مشهودتر است.}, keywords_fa = {مرکب لیتوگرافی,توزیع اندازه ذرات,غلظت,رئولوژی,گرانروی,تیکسوتروپی,مدول}, url = {https://jcst.icrc.ac.ir/article_75975.html}, eprint = {https://jcst.icrc.ac.ir/article_75975_c22c5d171038a5b0063f587068761f1b.pdf} } @article { author = {Emami, F. and Tehrani-Bagha, A.R. and Gharanjig, K.}, title = {Influence of Operational Parameters on the Decolorization of an Azo Reactive Dye (C.I. Reactive Red 120) by Fenton Process}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {105-114}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {This study provides information on the application of the Fenton process as an advanced oxidation method for the treatment of wastewater containing an azo reactive dye (C.I. Reactive Red 120). To establish cost-efficient operating conditions for potential application of Fenton oxidation process, the influence of the main operating parameters such as iron sulfate and hydrogen peroxide doses, solution pH, temperature, initial dye concentration and presence different concentrations of sodium chloride and sodium sulfate have been studied systematically in a laboratory scale. The obtained results showed that the best pH value for decolorization of dye solution was 3. The decolorization of RR120 enhanced with the increasing of reaction temperature but decreased as a presence of chloride and sulfate ions. The increase of Fe2+ and H2O2 doses accelerated the color and COD removals until a point where further addition of Fe2+ or H2O2 became inefficient and unnecessary. The result indicated that over 99% color removal and up to 74% COD removal can be obtained by Fenton’s oxidation.}, keywords = {reactive dye,Advanced oxidation,Fenton Reagent,Color Removal,COD removal}, title_fa = {بررسی عوامل مؤثر بر رنگبری یک رنگزای آزو راکتیو (C.I. Reactive Red 120) به روش فنتون}, abstract_fa = {در این تحقیق اطلاعاتی در مورد کاربرد فرآیند فنتون به عنوان یک روش اکسیداسیون پیشرفته برای تصفیه پساب حاوی یک رنگزای آزو راکتیو (Reactive Red 120) گزارش شده است. برای به دست آوردن شرایط عملکرد مقرون به صرفه برای کاربرد فرآیند اکسیداسیون فنتون، تأثیر پارامترهای اصلی عملیات مثل میزان سولفات آهن، آب اکسیژنه، pH محلول، دما، غلظت اولیه رنگزا و حضور غلظت‌های متفاوت از کلرید سدیم و سولفات سدیم در مقیاس آزمایشگاهی مورد مطالعه قرار گرفت. نتایج حاصل نشان می‌دهد که بهترین مقدار pH در رنگبری برابر 3 است. سرعت رنگبری محلول حاوی رنگزای RR120 با افزایش دما، افزایش پیدا می‌‌کند اما در حضور یون‌های کلرید و سولفات کاهش نشان می‌دهد. افزایشFe2+ و H2O2 تا حد مشخصی باعث افزایش حذف اکسیژن مورد نیاز شیمیایی (COD) و رنگ می‌شود و افزایش غلظت پس از آن غیر ضروری و بی‌تأثیر است. نتایج نشان می‌دهد که با روش اکسیداسیون فنتون بیش از 99% رنگبری و تا 74% کاهشCOD قابل حصول است.}, keywords_fa = {رنگزای راکتیو,اکسیداسیون پیشرفته,واکنشگر فنتون,رنگبری,حذف COD}, url = {https://jcst.icrc.ac.ir/article_75976.html}, eprint = {https://jcst.icrc.ac.ir/article_75976_c41ec3e980b04e611a84f305021c8eb1.pdf} } @article { author = {Seifolahzadeh, S. and Montazer, M.}, title = {Self-cleaning of Methylene Blue and Acid Blue 113 on Wool/Polyester Fabric Treated with Nano Titanium Oxide under UV Irradiation without Yellowing}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {115-123}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {This research aims to create the selfcleaning property on wool/ polyester fabric using TiO2 nano-particles. In order to provide the fabric with higher absorption of nanoparticles, the oxidation of wool with KMnO4 were carried out. The crosslinking agent namely butane tetra carboxylic acid (BTCA) was used to stabilize the nanoparticles on the fabric surface. To investigate the properties on the treated fabric, discoloration of Methylene Blue and Acid Blue 113 stains, water drop absorption, crease recovery angle, yellowing and bending of the fabric were examined and the results reported. Furthermore, the FT-IR spectrum of some samples was analyzed. The changes in color differences for different samples showed that an appropriate discoloration achieved on the fabric samples treated with TiO2 after UV radiation. Also the reflectance spectrum of samples was investigated and the results confirmed the UV absorption by TiO2 nano particles that protect the fabric from yellowing.}, keywords = {Self-cleaning,nano TiO2,Wool/Polyester,UV Irradiation,Yellowing}, title_fa = {خودتمیزشوندگی لکه متیلن بلو و اسید بلو 113 روی پارچه پشم/پلی‌استر عمل شده با نانو دی‌اکسید تیتانیوم زیر نورفرابنفش بدون زردی}, abstract_fa = {این تحقیق به منظور ایجاد ویژگی خودتمیزشوندگی روی کالای پشم/پلی‌استر به کمک نانو ذرات دی‌اکسید تیتانیوم انجام شده است. به منظور جذب بهتر نانو ذرات روی کالا، اکسیداسیون جزء پشمی توسط پرمنگنات پتاسیم انجام شده است. همچنین برای تثبیت ذرات نانو دی اکسید تیتانیوم روی سطح پارچه از پیوند دهنده شیمیایی بوتان تترا کربوکسیلیک اسید استفاده شده است. ویژگی خود تمیز شوندگی کالا توسط لکه‌گذاری سطحی با رنگزاهای متیلن بلو و اسید بلو 113 بررسی شده و به علاوه برخی دیگر از ویژگی‌های کالا مانند زمان جذب قطره آب، زاویه بازگشت از چروک، خمش پارچه و شاخص زردی آزمون و نتایج گزارش شده‌اند. همچنین در بررسی طیف FT-IR برخی از نمونه‌ها افزایش گروه‌های عاملی در منسوج پس از آماده‌سازی کالا مشاهده شده است. اختلاف رنگ منسوجات آماده و پیوند شده با TiO2 بعد از پرتودهی با پرتو فرابنفش نسبت به قبل از پرتودهی ویژگی خودتمیزشوندگی را به خوبی نشان می‌دهند. همچنین طیف انعکاسی در محدوده فرابنفش نشان می‌دهند که وجود ذرات نانو دی اکسید تیتانیوم به جذب تابش فرابنفش کمک کرده و از زرد شدن کالا جلوگیری کرده است.}, keywords_fa = {خودتمیزشوندگی,نانو دی‌اکسید تیتانیوم,پشم/پلی‌استر,پرتو فرابنفش,زردی}, url = {https://jcst.icrc.ac.ir/article_75977.html}, eprint = {https://jcst.icrc.ac.ir/article_75977_7777a7ac33ef415cc00f9f0311b1ccfd.pdf} } @article { author = {Soleimani-Gorgani, A.}, title = {Investigation of Added Alkali and Electrolyte on Dyeing Nylon 6.6 by Mono-Chlortriazinyl Reactive Dye}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {2}, pages = {125-131}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {One of the recurring problems observed with most of commercial anionic reactive dyes for dyeing nylon was the low degree of exhaustion and fixation. In this paper, a number of attempts were made to improve the fixation efficiency of an anionic reactive dye, Procion Rubine XL+, on modified nylon. This dye was selected for further study since, from the previous study, under non-optimised conditions fixation efficiency was particularly poor and therefore offered more scope for significant and readily observable improvements. The following process variables were studied;(a)effect of added alkali; dye was exhausted at pH 4 and then alkali added,(b) effect of added electrolyte, The addition of alkali and electrolyte during dyeing resulted in reduced dye fixation.}, keywords = {Reactive Dyes,Fixation,Nylon 6.6,Electrolyte}, title_fa = {بررسی اثر افزودن باز و الکترولیت در رنگرزی نایلون 6.6 با رنگزای راکتیو منوکلروتری آزین}, abstract_fa = {با توجه به پایین بودن درصد رمق‌کشی و تثبیت رنگزاهای راکتیو آنیونی تجاری در رنگرزی نایلون 6.6 ، در این پژوهش افزودن باز و الکترولیت به صورت جداگانه و با هدف بهینه‌سازی رنگرزی مورد ارزیابی قرارگرفت. از آنجایی که طبق تحقیقات قبلی، رنگزایProcion Rubine XL+ نسبت به سایر رنگزاهای راکتیو آنیونی تجاری دارای ضعیف‌ترین خصوصیات رنگرزی بود، در مطالعه حاضر از آن به عنوان رنگزای مورد مطالعه استفاده شد و رنگرزی با دو روش متفاوت بر روی نایلون انجام گردید. در روش اول، پس از رمق‌کشی رنگزا در 4pH= کربنات سدیم به عنوان باز به حمام رنگرزی اضافه شد و در روش دوم، الکترولیت به همراه رنگزا در 4pH= به حمام رنگرزی اضافه گردید و خصوصیات رنگرزی هر کدام به صورت جداگانه بررسی شد. در این بررسی مشخص شد که افزودن باز یا الکترولیت به حمام رنگرزی اثر بهینه‌سازی در خصوصیات رنگرزی را ندارد.}, keywords_fa = {رنگزای راکتیو,درصد تثبیت رنگزا,نایلون6.6,الکترولیت}, url = {https://jcst.icrc.ac.ir/article_75978.html}, eprint = {https://jcst.icrc.ac.ir/article_75978_4ee8c806a6a09cad9ebba18eb9280cb4.pdf} }