@article { author = {Mahmoodi, N.M. and Arami, M. and Gharanjig, K. and Nourmohammadian, F.}, title = {Decolorization and Mineralization of Basic Dye using Nanophotocatalysis: Pilot Scale Study}, journal = {Journal of Color Science and Technology}, volume = {1}, number = {1}, pages = {1-6}, year = {2007}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, decolorization and mineralization of Basic Blue 41 (BB 41) were investigated by nanophotocatalytic process using immobilized titania nanoparticles in a batch photoreactor. Photocatalytic decolorization and mineralization processes of dye solutions were performed at pilot scale (10 L). To obtain the details of the photocatalytic degradation of BB 41, UV-Vis and Ion Chromatography (IC) analyses were employed. The effects of major variables governing the efficiency of the process such as H2O2 dosage, dye concentration and anions (NO3-, Cl-, SO42-, HCO3- and CO32-) were investigated. Kinetic analysis indicates that the photocatalytic decolorization rates can usually be approximated first-order model. The nitrate and sulfate anions were measured as photocatalytic mineralization products of BB 41. The results show that the employment of desired operational parameters may lead to complete decolorization and mineralization of BB 41 at pilot scale.}, keywords = {Nanophotocatalysis,Decolorization,Mineralization,Titania nanoparticles,Pilot scale}, title_fa = {رنگبری و معدنی شدن رنگزای بازیک با استفاده از فرآیند نانوفوتوکاتالیز: مطالعه در مقیاس پایلوت}, abstract_fa = {در این تحقیق، رنگبری و معدنی شدن رنگزای بازیک آبی 41 با فرآیند نانوفوتوکاتالیزی در حضور نانوذرات تیتانیای تثبیت‌ شده در داخل راکتور ناپیوسته مورد بررسی قرار گرفت. فرآیند رنگبری و معدنی شدن رنگزای بازیک در مقیاس پایلوت (10 لیتر) انجام شد. دستگاه‌‌های اسپکتروفوتومتر و یون کروماتوگراف برای بررسی جزئیات رنگبری و معدنی شدن رنگزای بازیک مورد استفاده قرار گرفتند. تأثیر عوامل مؤثر در راندمان فرآیند رنگبری از جمله غلظت آب اکسیژنه، غلظت رنگزا و حضور آنیون‌ها (نیترات، کلرید، سولفات، بیکربنات و کربنات) مطالعه شد. نتایج آزمایشات نشان داد که فرآیند رنگبری از سینتیک مرتبه اول تبعیت می‌کند. مقدار یون‌های نیترات و سولفات به عنوان محصولات فرآیند معدنی شدن رنگزا، اندازه‌گیری شدند. این تحقیق نشان داد که با بهینه‌سازی عوامل عملیاتی مؤثر، می‌توان فرآیند رنگبری و معدنی شدن رنگزای بازیک آبی 41 را در مقیاس‌‌های بزرگ‌تر انجام داد.}, keywords_fa = {نانوفوتوکاتالیز,رنگبری,معدنی شدن,نانوذرات تیتانیا,مقیاس پایلوت}, url = {https://jcst.icrc.ac.ir/article_75896.html}, eprint = {https://jcst.icrc.ac.ir/article_75896_fc9057433409938d3adb591f304685ac.pdf} } @article { author = {Hadadi, V. and Yousefi, A.A. and Moeini, R. and Ganji, M. T. and Khosravi, M.}, title = {Bituminous Blends for Different Coating Applications}, journal = {Journal of Color Science and Technology}, volume = {1}, number = {1}, pages = {7-18}, year = {2007}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Bitumen is a very important component of anti-corrosion coatings and water proofing membranes which has found many applications. Depending on the application, bitumens have different compositions and physico-chemical properties. Softer bitumen is usually air-blown to adjust the physical properties of the final bitumen. Here, preparation of 60/70, 85/25 and 90/15 bitumens was achieved via physical mixing of air-blown 110/10 bitumen with 85/100 penetration grade and heavy-vacuum slops (HVS) cut. The softening point of the resulting bitumen changes with the asphaltenes’ content, whereas its penetration varies exponentially. This difference in behavior was attributed to the shear forces applied during the tests and was account for via the bitumen viscosity and cohesive energy acting between asphaltenes. Finally, some formulations for the target bitumens were reported via mixing of the above-mentioned raw-materials.}, keywords = {H.V.S,Bitumen,softening point,penetration grade,Viscosity,cohesive energy}, title_fa = {آمیخته‌های قیری مناسب جهت کاربردهای پوششی مختلف}, abstract_fa = {قیر یک ماده پوششی بسیار مهم در پوشش‌های ضد خوردگی و ضد رطوبتی می‌باشد که کاربردهای گسترده و وسیعی دارد. این ترکیب بسته به نوع کاربرد باید دارای خواص شیمیایی و فیزیکی متفاوتی باشد. به این دلیل مطالعه ساختار داخلی و خواص فیزیکی-شیمیایی قیر از اهمیت بالایی برخوردار است. تغییر در خواص فیزیکی قیرها بیشتر از طریق هوادهی قیرهای نرمتر انجام می‌شود و مطالعات انجام گرفته نیز بر این اساس بوده است. در این مقاله سعی شد با اختلاط قیرهای دمیده 10/110 ، قیر 100/85 و برش نفتی H.V.S. (Heavy vacuum slops)، قیرهای مختلف بخصوص قیرهای 70/60 ، 25/85 و 15/90 تهیه گردد. مشاهده شد که رفتارهای نقطه نرمی نسبت به کاهش درصد آسفالتن‌ها در تمام مراحل اختلاط به صورت خطی است. در حالی که رفتار درجه نفوذ با کاهش درصد آسفالتن‌ها به صورت نمایی می‌باشد. دلایل این رفتارها بسته به نوع نیروهای برشی به کاربرده شده مورد بررسی و مطالعه قرار گرفت و با ارتباط دادن آنها به گرانروی و نیروهای همچسبی بین آسفالتن‌ها توجیه شدند. در نهایت با بررسی خواص و نتایج اختلاط مواد فوق با یکدیگر فرمولاسیون‌هایی جهت رسیدن به قیرهای یاد شده به دست آمد.}, keywords_fa = {H.V.S,قیر,نقطه نرمی,درجه نفوذ,گرانروی,انرژی همچسبی}, url = {https://jcst.icrc.ac.ir/article_75897.html}, eprint = {https://jcst.icrc.ac.ir/article_75897_d1945d6fcc18dd33c78bd271216701a2.pdf} } @article { author = {Shams-Nateri, A. and Saberi Motlagh, M.}, title = {Simulation of Vat Dye Leuco Solution}, journal = {Journal of Color Science and Technology}, volume = {1}, number = {1}, pages = {19-24}, year = {2007}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this work, the behavior of leuco solutions of vat dye was studied by using their spectrophotometeric data. Initially, the leuco solutions of C.I.Vat Green 1 were prepared with different concentration of sodium hydrosulfite and soda. Then, the absorbance spectral of leuco solutions were measured by spectrophotometer. The relationship between color and absorbance of leuco solution and concentration of soda and sodium hydrosulfite was studied. The obtained result shows, that the color and absorbance of leuco solution depend on the amount of soda and sodium hydrosulfite. Beside, the reduction properties of sodium hydrosulfite depend on the concentration of soda. Subsequently, the leuco solution was simulated by using subtractive color mixing low.}, keywords = {Vat Dye,Leuco solution,Simulation,Color mixing,Spectrophotometer}, title_fa = {شبیه‌سازی محلول لوکوی رنگزای خمی}, abstract_fa = {در این کار تحقیقاتی، رفتار محلول لوکوی رنگزای خمی به کمک داده‌های جذب سنجی مورد بررسی قرار گرفته است. برای این منظور محلول لوکوی رنگزای خمی با مقادیر مختلف سود و هیدروسولفیت سدیم تهیه گردید. سپس طیف جذبی محلول‌های تهیه شده توسط دستگاه اسپکتروفوتومتر اندازه‌گیری شد. ارتباط بین طیف جذبی و رنگ محلول رنگزای خمی با مقادیر سود و هیدروسولفیت سدیم مورد بررسی قرار گرفت. نتایج نشان می‌دهد که رنگ و طیف جذبی محلول لوکو بستگی به مقدار سود و هیدروسولفیت سدیم دارد. همچنین قدرت احیاء کنندگی هیدروسولفیت سدیم تابع مقدار سود مصرفی می‌باشد. در ادامه از قوانین اختلاط کاهشی رنگ‌ها جهت مدل‌سازی رفتار محلول لوکو استفاده گردید.}, keywords_fa = {رنگزای خمی,محلول لوکو,شبیه‌سازی,اختلاط رنگ,اسپکتروفوتومتر}, url = {https://jcst.icrc.ac.ir/article_75898.html}, eprint = {https://jcst.icrc.ac.ir/article_75898_7eb5690e98c744eb1515397936c7fe89.pdf} } @article { author = {Yousefi, A.A. and Bigdeli, E.}, title = {Synthesis of Water-Based Alkyd Resins}, journal = {Journal of Color Science and Technology}, volume = {1}, number = {1}, pages = {25-40}, year = {2007}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The paper reports on the synthesis of water-based alkyd resins and preparation of corresponding water-based paints. Several routes were adapted in the synthesis of alkyd resins. In the first route, non-modified alkyd resins were synthesized at first and then a mixture of the vinyl monomers was grafted on the fatty acid moiety of the alkyd resin via peroxide initiated polyaddition polymerization. In the second route, the vinyl monomers were grafted on fatty acid via peroxide initiated polyaddition polymerization and in the next step the grafted fatty acid was incorporated in the alkyd resin structure through polycondensation polymerization. In the third route, two different methods were adapted. In the first method, the grafted alkyd resins obtained from the first and second routes were reacted with a polyethylene glycol resin (PEG). In the second method, a non-grafted alkyd resin was reacted with PEG and then a mixture of monomers was grafted on fatty acid moiety of the prepared alkyd. Drying time of the films of the prepared resins and paints is similar to that of the solvent-based alkyd resins. The aqueous dispersions of these resins suspend high enough finely-divided titanium dioxide pigment. The gloss of the dried paint film is also high enough. Use of maleic anhydride as dispersing agent is the novelty of this work which is reported for the first time.}, keywords = {Alkyd,resin,water-based,paint,maleic acid,Fatty Acid,alkyd/maleic hybrid resin}, title_fa = {سنتز رزین‌های آلکید آب پایه}, abstract_fa = {سنتز رزین‌های آلکید قابل پخش در آب و خواص فیلم این رزین‌ها و پوشرنگ‌های حاصله تشریح شد. رزین‌های آلکید آب پایه به چندین روش تهیه شدند. در روش نخست رزین آلکید معمولی به روش بسپارش تراکمی سنتز و سپس مخلوطی از منومرها به روش بسپارش افزایشی روی بنیان اسید چرب آن پیوند زده شد. در روش دوم ابتدا مخلوط منومرها به روش بسپارش افزایشی روی اسید چرب پیوند زده شده و سپس این اسید در ساختار رزین آلکید وارد و بسپارش تراکمی انجام شد. روش سوم با دو راهبرد انجام شد. در راهبرد اول رزین روش دوم با پلی اتیلن گلایکول (PEG) واکنش داده شد. در راهبرد دوم رزین آلکید معمولی با PEG واکنش داده شده و سپس مخلوط منومرهای وینیلی روی بنیان اسید چرب آن پیوند زده شدند. از میان روش‌های فوق، روش دوم رزین‌های هیبریدی (آلکید/مالئیک) را تولید می‌کند که دارای مزایای فرآیندی و اقتصادی مناسبی هستند. فیلم‌ها و پوشرنگ‌های رزین‌های به دست آمده در زمان‌های مشابه رزین‌های آلکید روغنی خشک شده، رنگدانه دی اکسید تیتانیوم به خوبی در آنها باز شده و درصد بالایی از این رنگدانه را در خود نگه می‌دارند. براقیت پوشرنگ‌های حاصله نیز مناسب می‌باشد. استفاده از منومر اسید مالئیک بجای اسید اکریلیک نوآوری این پژوهش می‌باشد که تاکنون گزارش نشده است.}, keywords_fa = {آلکید,رزین,آب پایه,پوشرنگ,اسید مالئیک,اسید چرب,رزین هیبرید آلکید/مالئیک}, url = {https://jcst.icrc.ac.ir/article_75899.html}, eprint = {https://jcst.icrc.ac.ir/article_75899_90f7ad314db9c95af00fd38a23fb2bbb.pdf} } @article { author = {رخساری آذر, صبورا and Farashiani, A. and Baghshahi, S. and Tamizifar, M.}, title = {Investigating the Optical and Structural Characteristics of ZnO:Er nano-layers Prepared by Sol-Gel Method}, journal = {Journal of Color Science and Technology}, volume = {1}, number = {1}, pages = {41-47}, year = {2007}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Er doped ZnO layers have many applications in optical communications. Transparent Er-doped ZnO thin films were deposited on soda-lime glass substrates by sol-gel method. To optimize the properties, different amounts of Er dopant and temperatures were used. The prepared nano-layers were characterized by XRD and spectrophotometery. All coatings showed ZnO hexagonal wurtzite crystal structure with 14-19nm particle size and very good transmittance (80%) in the range of 750-1750 nm. The maximum optical transmission was achieved by ZnO film doped with 3.0 wt.% Er and post-heat-treated in air at 550C.}, keywords = {ZnO:Er nano-layers,Transmittance,Sol-gel method,Dipping}, title_fa = {بررسی مشخصات نوری و ساختاری نانولایه‌های ZnO:Er تهیه شده به روش سل ـ ژل}, abstract_fa = {لایه‌های نازک اکسید روی آلاییده شده به اربیم در مخابرات نوری کاربردهای متعددی دارد. لایه‌های نازک اکسید روی با روش سل- ژل از طریق غوطه‌وری بر سطح زیرلایه‌های‌ شیشه‌ای از جنس سودالایم لایه‌نشانی شد. به منظور بهینه‌سازی خواص نوری لایه‌ها، از آلاینده اربیم با غلظت‌ها و دماهای پخت مختلف استفاده شد. مشخصات لایه‌ها با روش XRD و اسپکتروفوتومتری مورد بررسی قرار گرفت. در همه لایه‌ها، ساختار بلوری هگزاگونال وورتزیتZnO با اندازه دانه nm19-14 و درصد عبور نور بالاتر از 80% در محدوده nm1750-750 به‌دست آمد. به طور کلی افزایش دمای پخت تا دمای C550 و افزایش غلظت اربیم تا حد 3% عبور نور لایه‌ها را بهبود بخشید.}, keywords_fa = {نانولایه اربیم/ اکسید روی,عبور نور,فرآیند سل,ژل,روش غوطه‌وری}, url = {https://jcst.icrc.ac.ir/article_75900.html}, eprint = {https://jcst.icrc.ac.ir/article_75900_fe3c9f74f96a6f13ec7f0cf578fdaf8c.pdf} } @article { author = {Karami, E. and Shams-Nateri, A.}, title = {Determination of the Dye Content in Bicomponent Dye Mixturers by Ratio Spectra Derivative Method (peak to peak)}, journal = {Journal of Color Science and Technology}, volume = {1}, number = {1}, pages = {49-55}, year = {2007}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In the present work, ratio spectra derivative method (p-p) was used in order to determine the dye contents in different bicomponent dye mixtures prepared with three dyes of yellow, scarlet and red colors. The difference between neighboring extremmum values at derivative ratio spectra of bicomponent mixtures of the dyes were used for determination of dye content. The obtained recovery factor, absolute error and relative error by using the proposed derivative technique and normal methods were 99.287, 0.000033, 1.118 and 112.82, 0.00622, 22.693 respectively. The analysis of obtained results via the proposed derivative and normal methods show higher accuracy of the developed method in determination of bicomponent dye solutions.}, keywords = {Dye,concentration,Ratio spectra derivative method (peak to peak),Determination,Overlapping}, title_fa = {اندازه‌گیری غلظت رنگ در محلول‌های دوجزیی به روش مشتقی پیک تا پیک طیف نسبی}, abstract_fa = {در مقاله حاضر از روش مشتقی پیک تا پیک طیف نسبی به منظور تعیین غلظت اجزای مخلوط‌های مختلف دوتایی از سه رنگزا با رنگ‌های زرد، سرخ و قرمز استفاده گردید. در روش مشتقی پیشنهادی، از اختلاف مقادیر طیف جذبی نسبی به دست آمده در دو اکسترمم همسایه ( مقدار پیک تا پیک) جهت پیشگویی غلظت مواد رنگزا استفاده شد. مقادیر متوسط فاکتور بازیابی، خطای مطلق و خطای نسبی پیشگویی غلطت در نمونه‌های مختلف دوتایی تهیه شده در این تحقیق با استفاده از روش معمول به ترتیب 82/112، 00622/0 و 693/22 و با استفاده از روش مشتقی ارائه شده 287/99، 00033/0 و 118/1 بوده‌اند. با توجه به نتایج حاصله، روش مشتقی پیک تا پیک طیف نسبی در پیشگویی غلظت اجزای مخلوط‌های دوتایی مواد رنگزا نسبت به روش معمولی از دقت بالاتری برخوردار است.}, keywords_fa = {رنگزا,غلظت,روش مشتقی پیک تا پیک طیف نسبی,اندازه‌گیری,برهمپوشانی}, url = {https://jcst.icrc.ac.ir/article_75901.html}, eprint = {https://jcst.icrc.ac.ir/article_75901_5f0dee67b0447c80d3d4fea45712c4d2.pdf} }