per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
1
10
76206
بررسی نقش شخصیت در انتخاب رنگ پوشاک (مطالعه موردی: پوشاک ورزشی)
Investigating the Role of Personality in Choosing the Color of Clothing (Case Study: Sport Clothing)
سید رسول مرتضوی فر
rasoul.mortazavi92@gmail.com
1
فرزام فرزان
farzamfarzan@yahoo.com
2
سیده سعیده عالم طلب پشتیری
saeedehalamtalab@yahoo.com
3
مدیریت ورزشی، دانشگاه مازندران
مدیریت ورزشی، دانشگاه مازندران
مدیریت بازرگانی، دانشگاه مازندران
هدف تحقیق حاضر بررسی نقش شخصیت در انتخاب رنگ پوشاک ورزشی بود. این پژوهش به روش پیمایشی انجام شد و شیوه جمعآوری دادهها به صورت الکترونیکی، با استفاده از پرسشنامه ترکیبی بود. جامعه آماری تحقیق، دانشگاهیان دانشگاه مازندران بودند که پست الکترونیک داشتند. بر اساس جدول مورگان 379 نفر با روش نمونه گیری تصادفی ساده به عنوان نمونه آماری تحقیق انتخاب شدند. برای سنجش شخصیت از پرسشنامه شخصیت استفاده شد. به منظور بررسی ترجیحات رنگ برای پوشاک ورزشی، برای هر کدام یک عکس با 10 رنگ مختلف (در سه بخش رنگهای خنثی، گرم و سرد) قرار داده شد. دادههای جمعآوری شده با روش رگرسیون لجستیک چندجملهای تحلیل شد. نتایج نشان داد که نقش شخصیت در انتخاب رنگ پوشاک ورزشی به جز شورت ورزشی در سطح 0.05 معنیدار است و افراد هرچه تجربه پذیرتر و وجدانگراتر باشند، به انتخاب رنگهای خنثی و سرد نسبت به رنگهای گرم بیشتر تمایل دارند.
The aim of this study was to investigate the role of personality in choosing the color of sport clothing. This research was conducted through a survey and method of data collection was electronically and data collected by a combined questionnaire. The population of this research included all academics at University of Mazandaran that had e-mail. According to Morgan table, 379 of them were considered as a sample by using simple random method. To measure personality, personality questionnaire was used. For evaluating the preferences of color for sport, a picture was placed with 10 different colors (in three parts of neutral, warm and cold color). Data was analyzed by using polynomial logistic regression. Results showed that the role of personality was significant in the level of 0.05 in choosing the color of sport clothing except panties and people who are more experienced and more conscientious, tend to choose more neutral and cold colors than warm colors.
https://jcst.icrc.ac.ir/article_76206_13caa0e025fdf97e3704f672fdb539c1.pdf
رنگ
شخصیت
پوشاک
پوشاک ورزشی
Color
personality
Clothing
Sport Clothing
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
11
21
76207
تهیه پوشش ضدبازتاب لیزر با استفاده از ترکیبات کربن متخلخل
Preparation of the Antireflective Coating for Laser Using the Porous Carbon Materials
کمال قانی
kamal.ghani@gmail.com
1
محمد جعفری
jafariemamzadeh@gmail.com
2
سید علیاصغر عسگری
askari.s.ali@gmail.com
3
دانشکده علوم کاربردی، دانشگاه صنعتی مالکاشتر، شاهینشهر
دانشکده علوم کاربردی، دانشگاه صنعتی مالک اشتر اصفهان
دانشکده علوم کاربردی، دانشگاه صنعتی مالک اشتر
کاهش بازتابش لیزر به عنوان یک پدافند مؤثر برای محافظت از افراد و تجهیزات حساس حایز اهمیت است. مهمترین استراتژی برای کاهش آسیبهای تابش لیزر، کاهش میزان بازتابش آن از سطوح است. در این تحقیق از روشهای ایجاد تخلخل در ساختار رنگدانه برای دستیابی به پایینترین درصد بازتابش و ساخت پوششهای ضدبازتاب لیزر استفاده شده است. رنگدانههای کربنی متخلخل CMK-1 و CMK-3 تهیه شده و با روشهای XRD، FE-SEM و DR-UV-Vis-NIR ارزیابی شدند. پوشش حاوی این رنگدانهها روی بستر آلومینیمی اعمال شد و خواص عمومی رنگ و طیف بازتابش پراکنده آنها مورد بررسی قرار گرفت. در نهایت میزان بازتابش آن در برابر لیزر 532 نانومتر از فواصل مختلف مورد آزمایش قرار گرفت و مشخص شد که این پوششها نقش مؤثری در کاهش بازتابش لیزر تابیده شده ایفا مینمایند.
The reduction of laser reflectivity is important as an effective defense to protect people and sensitive equipment. Reducing the reflectivity of surfaces is the most important strategy for decreasing the damages of laser radiation. In this research, the porous pigments are prepared to achieve the lowest percentage of reflection which were used to fabricate antireflective coatings for laser radiation. The porous carbon pigments containing CMK-1 and CMK-3 were prepared and the resulting black pigments were characterized using XRD, FE-SEM and DR-UV-Vis-NIR. The prepared paints were applied on aluminum substrate and the general tests of paints were investigated. The laser reflectivity was evaluated at wavelength of 532 nm that shows these coatings are effective antireflective coating for laser beam.
https://jcst.icrc.ac.ir/article_76207_2d6cdff42c718092e00a6e9b97c33fa0.pdf
پوشش ضدبازتاب
لیزر
کربن متخلخل
CMK
1
3
Antireflective Coating
Laser
Porous carbon
CMK-1
CMK-3
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
23
34
76208
بررسی کارآیی اندیس سفیدی یوچیدا در محدوده تهرنگ اصلاح شده CIE
Evaluation of Performance of Uchida Whiteness Formula in CIE Modified Tinting Region
راضیه جعفری
jafari-ra@icrc.ac.ir
1
مینا شاه محمدی
m.sh.shahmohamadi@gmail.com
2
گروه پژوهشی فیزیک رنگ، مؤسسه پژوهشی علوم و فناوری رنگ و پوشش
دانشکده مهندسی نساجی، موسسه آموزش عالی کار، قزوین
با توجه به اهمیت و کاربرد گسترده محصولات سفید در صنایع مختلف، بررسی کارآیی فرمولهای سفیدی و میزان انطباق آنها با نتایج ارزیابیهای چشمی ضروری میباشد. با توجه به اصلاحیه اخیر CIE مبنی بر تغییر محدوده تهرنگ برای تعریف نمونههای سفید، کارآیی اندیس سفیدی یوچیدا در ارزیابی نمونههای سفید فلورسنتی مورد بررسی قرار گرفت. در این راستا میزان پذیرش سفیدی نمونههای سفید فلورسنتی با مقادیر مختلف اندیس سفیدی و تهرنگ، مطابق نظر ارزیابان بهدست آمد. همچنین همبستگی میان دو اندیس سفیدی CIE و یوچیدا با یکدیگر و با درصدپذیرش سفیدی نمونههای سفید محاسبه شد. نتایج نشان میدهد هرچند عملکرد اندیس سفیدی یوچیدا با اصلاح محدوده تهرنگCIE بهبود یافته است اما همچنان کارآیی اندیس سفیدیCIE به مراتب مطلوبتر میباشد. به این معنی که با تغییر در مرزهای تهرنگ نمونههای سفید، تطابق درصد پذیرش سفیدی نمونهها با فرمول سفیدی CIE بهتر از فرمول سفیدی یوچیدا بوده است. ضمن آنکه، به نظر میرسد در محدوده اصلاح شده تهرنگ CIE نتایج فرمول سفیدی یوچیدا به نتایج اندیس سفیدی CIE نزدیک شده است.
Regarding the commercial importance and industrial application of white products, investigation into the performance of whiteness indices and their conformity to the visual assessments is essential. In this paper, the performance of Uchida whiteness index for the evaluation of fluorescent whitening agents (FWAs) treated white specimens is investigated based on the modified CIE tinting formula. In this way, the percentage of whiteness acceptance of the fluorescent white samples with different whiteness and tinting attributes, are achieved based on the observers visual assessments. Besides, the correlations between CIE and Uchida whiteness indices as well as with the results of visual assessments are calculated. The results show that while the performance of Uchida whiteness index has been improved by modifying CIE tinting formula, the CIE whiteness index access white specimens, better. It means that, in the modified tinting region the results of visual assessments conform to CIE whiteness index better than Uchida formula. Moreover, it seems that the results of the Uchida whiteness formula closes to those achieved from CIE whiteness index in the modified tinting region.
https://jcst.icrc.ac.ir/article_76208_ccc33b202f7ece9aa0bca4c933cb1dfe.pdf
اندیس سفیدی CIE
محدوده تهرنگ CIE
اندیس سفیدی یوچیدا
ارزیابی سفیدی
CIE Whiteness index
CIE tinting formula
Uchida whiteness index
Whiteness assessment
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
35
44
76209
بررسی تغییرات خواص مکانیکی و حرارتی چسبهای حساس به فشار برپایه لاستیک بیوتیل با استفاده از نانوذرات سیلیکای اصلاح شده با مرکاپتوسیلان
Evaluation of Hybrid Organosilane Surface-Treated Nanoparticles on Physical and Mechanical Performance of IIR Based Pressure-Sensitive Adhesives
سید ادریس حسینی
edris.icst@gmail.com
1
مهران رستمی
rostami-m@icrc.ac.ir
2
رضا امینی
amini-re@icrc.ac.ir
3
گروه پژوهشی نانو فناوری رنگ و پوشش، موسسه پژوهشی علوم و فناوری رنگ و پوشش
گروه پژوهشی نانوفناوری رنگ، موسسه پژوهشی علوم و فناوری رنگ و پوشش
گروه پژوهشی پوششهای سطح و خوردگی، موسسه پژوهشی علوم و فناوری رنگ و پوشش
خواص محافظتی نوار چسبهای سرد ضدخوردگی وابسته به خواص فیزیکی و مکانیکی چسب لاستیکی مورد استفاده در تولید این محصول میباشد. این چسبها بر پایه لاستیک بیوتیل میباشند. یکی از اجزاء تعیینکننده در محصولات لاستیکی نوع پرکننده معدنی مورد استفاده میباشد. در این پژوهش اصلاح سطحی نانو ذرات سیلیکا OX50 توسط تری مرکاپتوپروپیل تری متوکسی سیلان به روش سل-ژل انجام شده و نتایج اصلاح سطحی توسط آزمونهای TGA و FT-IR مورد بررسی قرار گرفت. با توجه به اینکه تری مرکاپتوپروپیل تری متوکسی سیلان دارای گروه عاملی –SH میباشد، با پیوندهای غیراشباع لاستیک بیوتیل واکنش داده و سبب پخت لاستیک میگردد. برای مطالعه تاثیر نانوذرات اصلاح سطحی شده بر چسب حساس به فشار ضدخوردگی از آزمونهای نقطه نرمی، چسبندگی و تنش برشی استفاده شد. نتایج، بهبود خواص مکانیکی و حرارتی را نشان میدهد.
The aim of this Research is assessment of surface treatment effect with mercapto silane on nano silica (OX50) on mechanical and heat properties of pressure sensitive adhesive. In this study, at first, the surface of nano silica were treated by mercapto silane through sol-gel method. To studying silanization and functional group of nano particles, using TGA, FTIR analysis. Also, to investigating of chemical and physical interaction of treated and untreated particles with polymeric matrix, softening point, adhesion and lab shear tests were performed. Results revealed that the mechanical and thermal properties of pressure sensitive increased with silica treated.
https://jcst.icrc.ac.ir/article_76209_5c178e3d18ccf91f68cff6ac79b34f18.pdf
چسب حساس به فشار
اصلاح سطحی
پیوند دهنده سیلان
لاستیک بیوتیل
نانو ذرات
Pressure sensitive adhesive
surface treatment
Silane Coupling Agents
Butyl rubber
Nanoparticle
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
45
57
76210
مطالعه سینتیک رنگرزی نخ پلیاتیلن ترفتالات یکسره با جمعشدگی دوگانه (BSY) از نوع اینترلیس شده با ماده رنگزای دیسپرس انتخابی
A Study of Dyeing Kinetics of the Poly(Ethylene Terephthalate) Interlaced Bi-Shrinkage Filament Yarn with Selective Disperse Dye
محمد علی توانایی
ma.tavanaie@yazd.ac.ir
1
فرزانه انتظاری
farzane.entezari@yahoo.com
2
رقیه خواجه تاج یزدی
khajetaj1369@gmail.com
3
دانشکده مهندسی نساجی، دانشگاه یزد
دانشکده مهندسی نساجی، دانشگاه یزد
دانشکده مهندسی نساجی، دانشگاه یزد
در این مطالعه، سینتیک رنگرزی نخ پلیاتیلن ترفتالات یکسره با جمع شدگی دوگانه (BSY) تولیدشده به روش اینترلیس و نخ پلیاتیلن ترفتالات تکسچره معمولی مورد مطالعه قرار گرفته است. رنگرزی با استفاده از ماده رنگزای دیسپرس C.I. Disperse Blue 183 در دماها و زمانهای مختلف انجام شد. به منظور محاسبه ثابت سینتیک رنگرزی و ضرایب نفوذ در دماهای مختلف، دادههای حاصل از نتایج تجربی با رابطههای سینتیک شناختهشدهای چون ویکراستاف، پترسون، مکگرگور و سگارا-پوآنته برازش گردیدند. نتایج نشان داد در هر دو نوع نخ معمولی و نخ با جمعشدگی دوگانه پلیاتیلن ترفتالات، با افزایش دما و زمان رنگرزی، میزان رمقکشی، ثابت سرعت رنگرزی و ضریب نفوذ افزایش مییابد. همچنین در تمامی دماها و زمانهای مشابه رنگرزی، میزان رمقکشی و ضریب نفوذ برای نخ پلیاتیلن ترفتالات BSY از نخ پلیاتیلن ترفتالات معمولی بیشتر است. افزایش دمای رنگرزی از 120 به ˚C130، زمان رسیدن به نقطه عطف در منحنی رمقکشی نخ پلیاتیلن ترفتالات BSY را 50 درصد کاهش داد. همچنین مقدار انرژی فعالسازی نخ پلیاتیلن ترفتالات تکسچره معمولی، 22.3 درصد بیشتر از نخ پلیاتیلن ترفتالات یکسره BSY، مشاهده شد. در هر دو نوع نخ معمولی و BSY، تغییرات ثابت سرعت با افزایش دما براساس رابطه ویکراستاف از دقت بیشتری نسبت به سایر روابط برخوردار بود.
In this study, dyeing kinetics of the poly(ethylene terephthalate) (PET) interlaced bi-shrinkage and normal textured yarns were considered. The dyeing processes were carried out using C.I. Disperse Blue 183 at different times and temperatures. The experimental data were adjusted to well-known dyeing kinetic equations, i.e. Vickerstaff, Patterson, McGregor and Cegarra-Puente to determine the constant rate of dyeing and diffusion coefficient at different temperatures. The results showed that the exhaustion, constants rate of dyeing and diffusion coefficients were increased with increasing the time and temperature of dyeing process for both normal and interlaced bi-shrinkage PET yarns. Also in all similar dyeing times and temperatures, the exhaustion values and diffusion coefficients of interlaced bi-shrinkage PET yarns are higher comparing to normal PET yarns. The turning point of the exhaustion curve for the BSY PET yarn significantly was decreased (-50%) with increasing the dyeing temperature from 120 oC to 130 oC. Also activation energy of conventional PET yarn was observed 22.3% more than BSY PET yarn. The best adjustments of the both normal and interlaced bi-shrinkage PET yarns with applied dyeing kinetic equations were observed for the Vickerstaff equation.
https://jcst.icrc.ac.ir/article_76210_e1b90982b3ba49b688405792f424eecd.pdf
نخ فیلامنت پلیاستر با جمع شدگی دوگانه
ماده رنگزای دیسپرس
سینتیک رنگرزی
دمای رنگرزی
زمان رنگرزی
Interlaced bi-shrinkage PET yarn
Disperse dye
Dyeing kinetic
Dyeing temperature
Dyeing time
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
59
68
76211
اصلاح سطحی و مشخصهیابی پلیمر پرشاخه پلیاستر آمیدی با استفاده از مرکاپتو سیلان به روش سل-ژل
Surface Modification and Characterization of Polyester Amide Hyperbranched Polymer with 3-Mercapto Propyl Trimethoxy Silane from Sol-gel Method
میثم شکراله نیا روشن
roshan-ms@icrc.ac.ir
1
سعید باستانی
bastani@icrc.ac.ir
2
مرتضی گنجایی ساری
ganjaee-mo@icrc.ac.ir
3
گروه پژوهشی پوششهای سطح و خوردگی، موسسه علوم و فناوری رنگ و پوشش
گروه پژوهشی پوششهای سطح و خوردگی، موسسه پژوهشی علوم و فناوری رنگ و پوشش
گروه پژوهشی نانوفناوری رنگ، موسسه پژوهشی علوم و فناوری رنگ و پوشش
در این تحقیق پلیمر پرشاخه پلیاستر آمیدی با 10 گروه انتهایی هیدروکسیل با استفاده از 3- مرکاپتو پروپیل تری متوکسی سیلان اصلاح گردید. فرآیند اصلاح تحت شرایط سل-ژل در دو pH 4.5 و 7 در 4 بازه زمانی 30 دقیقه، 2، 8 و 24 ساعت انجام گرفت. شناسایی محصول به دست آمده با استفاده از آزمونهای طیف زیر قرمز (FT-IR)، رزونانس مغناطیسی هستهای (NMR) و آنالیز وزنسنجی گرمایی (TGA ) مورد ارزیابی قرار گرفت. نتایج به دست آمده بیانگر قرارگیری گروه مرکاپتان به جای گروه هیدروکسل بوده است. نمونههایی که در pH خنثی مورد واکنش قرار گرفتهاند به دلیل سرعت پایین واکنش آبکافت و بالاتر بودن سرعت واکنش تراکم از درصد تبدیل بالاتری برخوردار بودهاند. از میان نمونههای ارزیابی شده نمونه 8 ساعت در pH خنثی دارای بالاترین بازده اصلاح بوده است. همچنین افزایش زمان در هر دو pH موجب افزایش میزان اصلاح شده است. در نهایت شرایط مناسب برای انواع میزان اصلاح سطحی ارائه شده است.
In this investigation, a polyester-amide hyperbranched polymer possessing 10 hydroxyl end-groups was modified by 3-mercaptopropyle tri-methoxy silane through the well-known sol-gel chemistry. The modification process was carried out using two different independent variables, i.e. pH and duration of the reactions, at two and 4 various levels, respectively. The formers levels were 4.5 and 7 and the latters levels were 0.5, 2, 8 and 24 hrs. To characterize the obtained products, Fourier transform infrared (FTIR) spectroscopy, Nuclear Magnetic Resonance (NMR) and Thermo-gravimetric analysis (TGA) were exploited. The outcomes demonstrated that the replacement of hydroxyl end-groups by mercapto functionalities had already happened. The samples at neutral pH, due to lower speed of hydrolysis reactions and higher speed of condensation ones, showed higher conversions. Among the assessed samples, the one at neutral pH and 8 hours of reaction duration, owed the maximum efficacy. Also, it was concluded that the longer the reaction duration, the higher the modification progress is obtained at both pH levels. Eventually, the optimum conditions for various kinds of modification levels are proposed.
https://jcst.icrc.ac.ir/article_76211_480cebe57197d63f922dff4b8c024706.pdf
پلیمر پرشاخه
سل
ژل
اصلاح سطحی
3
مرکاپتو پروپیل تری متوکسی سیلان
Hyperbranched polymer
Sol-Gel
Surface modification
3-mercapto propyl tri methoxy silane
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2017-03-21
11
1
69
77
76212
رابطه رنگ و درخشش فلزی با اندازه نانوذرات فلزی در تزئینات زرین فام
Relationship Between Color and Metallic Shine With the Size of Metal Nanoparticles in Luster Decorations
حسین احمدی
h.ahmadi@aui.ac.ir
1
احمد صالحی کاخکی
salehi.k.a@aui.ac.ir
2
عباس عابد اصفهانی
abedesfahani@gmail.com
3
گروه مرمت اشیاء تاریخی و فرهنگی، دانشکده مرمت، دانشگاه هنر اصفهان
دانشکده حفاظت و مرمت، دانشگاه هنر اصفهان
دانشکده مرمت، دانشگاه هنر اصفهان
تزئین زرینفام لایه نازکی باساختار نانو است که ازنانوبلورهای مس و نقره فلزی پراکنده در یک بافت شیشهای تشکیل شده است. درمورد لعابهای با تزئین زرینفام آنچه مشاهده میشود اعم از رنگ و یا درخشش، نتیجه جذب و پخش (بازتاب پخشیده) نور میباشد. اندازه نانوذرات فلزی بر رفتار متقابل این ذرات با نور و درنتیجه رنگ آنها تاثیری اساسی دارد. آنچه ناظر میبیند نتیجه جذب بعضی ازطول موجها و پخش و/ یا بازتاب بعضی دیگر از طول موجهای نورمرئی از روی نانوذرات میباشد و نسبت بین این دو مقدار برکیفیت آنچه دیده میشود تاثیر بسزایی خواهد داشت. در این پژوهش با به کارگیری پوشرنگها با فرمولبندی متفاوت بر روی یک نمونه لعاب ماتشده با اکسید قلع و پخت نمونهها در شرایط مناسب از نظر اکسایش و کاهش، انداز نانوذرات تشکیل شده در زرینهای با رنگ و درخششهای مختلف مورد تجزیه و تحلیل قرار گرفته است. اندازهگیریهای کمی و تعیین اندازه نانوذرات با استفاده از روشهای 1SEM-EDS ، 2FE-SEM صورت گرفت. نتایج حاصل از این بررسیها نشان داد که رنگ و متوسط اندازه نانوذرات به ترکیب پوشرنگ مورد استفاده بستگی داشته و با حضور مس در پوشرنگ اندازه ذرات کاهش مییابد.
Luster decoration is a thin layer of copper and/or silver nanocrystals dispersed within the glassy matrix. Color and shine of luster decorations depend on absorption and reflection of light. The sizes of metallic nanoparticles have an important effect on interaction of light and these particles. The quality of the thing is seen is related to amount of absorption and reflection light. In this paper different luster raw paints are applied over a tin-opacified glaze and then the samples was fired under suitable oxidation and reduction atmosphere. The sizes of formed nanoparticles in lusters with different color and shine were investigated. Scanning Electron Microscopy-Energy Dispersive Spectrometry (SEM-EDS) and Field Emission Scanning Electron Microscopy (FE-SEM) was used to quantitative analysis and determination of nanoparticle sizes. Experiments showed that color and average size of metallic nanoparticles depend on luster raw paints and the presence of copper in raw paint reduces the size of nanoparticles.
https://jcst.icrc.ac.ir/article_76212_80860eb8a44e2d12380f9172a3733741.pdf
درخشش
زرینفام
نانوذرات
پوشرنگ
SEM
EDS
Fe
Luster
Metallic shine
paint
Firing
SEM-EDS
FE-SEM