per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
137
144
76192
تخریب ماده رنگزای بازیک قرمز 13 با فرآیند ترکیبی سونوالکتروشیمی در حضور نانوذرات TiO2
Discoloration of Basic Red 13 with Hybrid Process of Sonoelectrochemistry in Presence of TiO2 Nanoparticles
نوید نصیری زاده
nasirizadeh@iauyazd.ac.ir
1
محمد دهقانی
mohamad.deh@gmail.com
2
سعید جعفری
saeidjafari91@yahoo.com
3
دانشکده مهندسی نساجی و پلیمر، دانشگاه آزاد اسلامی، واحد یزد
باشگاه پژوهشگران جوان و نخبگان، دانشگاه آزاد اسلامی، واحد یزد
باشگاه پژوهشگران جوان و نخبگان، دانشگاه آزاد اسلامی واحد یزد
شرایط رنگبری از محلولهای حاوی ماده رنگزا بازیک قرمز 13 با سیستم ترکیبی سونوالکتروشیمی با کمک نانوذرات دیاکسید تیتانیم با استفاده از رویه سطح پاسخ بهینهسازی شد. اثر عوامل مختلف مؤثر بر فرآیند، شامل مدت زمان اعمال فرآیند، مقدار نانوذرات دیاکسید تیتانیم، pH محلول و مقدار ولتاژ اعمالی مورد بررسی قرار گرفت. براساس نتایج حاصل، کمترین مقدار حذف ماده رنگزا در 5=pH و بیشترین مقدار رنگبری در شرایط محیطی قلیایی ملایم (8=pH)حاصل شد. با افزایش مقدار نانوذرات دیاکسید تیتانیم تا g/l 0.68، روند رنگبری افزایشی بوده و سپس اندکی کاهش مییابد، با افزایش مقدار ولتاژ اعمالی تا V 0.85، میزان حذف رنگزا نیز با شیب ملایم به میزان 57% افزایش یافته و بعد از آن تقریباً ثابت شده است. مدت زمان فرآیند فراصوت ـ الکتروشیمی تاثیر مستقیمی بر رنگبری داشته است. آنالیز واریانس دادهها مشخص کرد که pH عامل تاثیرگذار اصلی بوده و زمان و مقدار ولتاژ اعمالی و مقدار نانوذرات دیاکسید تیتانیم به ترتیب در رده بعدی تاثیرگذاری قرار دارند. بهترین شرایط جهت انجام فرآیند رنگبری شامل 8=pH ، زمان 91 دقیقه، ولتاژ V 0.85 و g/l 0.685 نانوذرات دیاکسید تیتانیم بهدست آمد. نتایج نشان داد که روش ترکیبی فراصوت-الکتروشیمی با کمک نانوذرات دیاکسید تیتانیم قابلیت حذف رنگزا را داشته و میتواند همواره در کاهش و حذف ماده رنگزا مورد توجه قرار گیرد.
The decolorization conditions of aqueous solutions containing basic red 13 with sonoelectrochemistry system by titanium dioxide nanoparticles using central composite design was optimized. The effect of different parameters affecting on decolorization process, including time, the amount of TiO2 nanoparticles, initial pH and the applied potential was investigated. Based on the results, lowest amount of color removal at pH = 5.0 and the highest amount of decolorization in moderate alkaline environment (pH=8) has been achieved. Decolorization was increased by increment the amount of titanium dioxide nanoparticles to 0.68 g/l and then slightly decreases. By increasing the applied potential up to 0.85 V, the Decolorization increases with mild slope and then remains constant. The time of sonoelectrochemistry process has a direct effect on decolorization.The analysis of variance (ANOVA) showed that the main influencing factor was the pH and amount of TiO2 nanoparticles, the time and amount of applied potential followed in order to be effective. The optimum conditions for the degradation of dye were found to be as follows: pH= 8, time = 91 min, applied voltage = 0.85 V and nano TiO2 amount = 0.685 g/l. The present results showed that sonoelectrochemistry assisted by TiO2 nanoparticles have a good potential for dye removal from aqueous solution in the industrial application.
https://jcst.icrc.ac.ir/article_76192_6f72ac79cdaf722094be3a7f07e27374.pdf
ماده رنگزای بازیک قرمز
تخریب مادهرنگزا
سونوالکتروشیمی
نانوذرات دیاکسید تیتانیم
Basic red dye
Discoloration
Sonoelectrochemistry
TiO2 nanoparticles
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
145
154
76193
مطالعه عوامل مؤثر بر رسانایی نانوذرات پلیپیرول (دوپ شده با کلرید آهن III) تهیه شده به روش پلیمریزاسیون امولسیونی
Study of Effective Factors on the Conductivity of Polypyrrole Nanoparticles (Doped with FeCl3) Synthesized via Emulsion Polymerization
فاطمه خادم
f.khadem84@yahoo.com
1
ملیحه پیشوایی
pishvaei@icrc.ac.ir
2
فرهود نجفی
fnajafi@icrc.ac.ir
3
مهدی سلامی کلجاهی
m.salami@sut.ac.ir
4
دانشکده مهندسی پلیمر، دانشگاه صنعتی سهند، تبریز
گروه پژوهشی رزین و افزودنی ها، موسسه پژوهشی علوم و فناوری رنگ و پوشش
گروه رزین و افزودنیها، پژوهشکده پوششهای سطح و فناوریهای نوین، موسسه پژوهشی علوم و فناوری رنگ و پوشش
دانشکده مهندسی پلیمر، دانشگاه صنعتی سهند، تبریز
در این پژوهش نانوذرات شبه کروی پلیپیرول با ابعاد کوچکتر از 100 نانومتر با کمک آغازگر کلرید آهن III که همزمان نقش دوپنت را برای پلیمر ایفا میکند، به روش پلیمریزاسیون امولسیونی تهیه شدند. ساختار شیمیایی پلیپیرول با استفاده از آزمون طیفسنجی زیر قرمز تبدیل فوریه تأیید شد؛ شکل و ابعاد نانوذرات پلیپیرول نیز از طریق تصاویر میکروسکوپ الکترونی مورد بررسی قرار گرفت. آزمون پراش پرتو ایکس جهت شناسایی نظم ساختاری و آزمون هدایتسنجی الکتریکی چهارنقطهای برای اندازهگیری میزان رسانایی نمونهها انجام شد. در پژوهش حاضر دمای واکنش، غلظت آغازگر و نحوه خوراکدهی از جمله عوامل مؤثر بر رسانایی پلیپیرول حاصله هستند که بررسی شدهاند. در این پژوهش بسادگی بدون استفاده از تجهیزات پیچیده سنتز و یا به کارگیری مواد اولیه متفاوت، با بهینهسازی شرایط واکنش محصولی با رسانایی S/cm 8.5 به دست آمد. به علاوه اثر گذشت زمان بر رسانایی محصول بررسی شده است.
In this study, spherical-like polypyrrole nanoparticles with diameter smaller than 100 nm were synthesized via emulsion polymerization using FeCl3 as dopant and initiator simultaneously. Chemical structure of polypyrrole was confirmed with FTIR spectra. Furthermore, the morphology and the size of polypyrrole nanoparticles were investigated by SEM images. The structural order of samples was investigated using XRD analysis and the conductivity of samples was measured by four point probe method. In this work, effective factors on the conductivity of resulted polypyrrole including reaction temperature, initiator concentration and feeding strategy were investigated. In this study, without the use of complex equipment of synthesis or the use of different raw materials simply by optimizing the reaction conditions, a product with a conductivity of 8.5 S/cm was obtained. Moreover the aging effect on the conductivity of product was discussed.
https://jcst.icrc.ac.ir/article_76193_69e433e723d33b6d32d31942c2abf3bf.pdf
پلیپیرول
پلیمریزاسیون امولسیونی
رسانایی
کلرید آهن III
دمای واکنش
Polypyrrole
Emulsion polymerization
conductivity
FeCl3
reaction temperature
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
155
167
76194
بررسی نسبت برخی از اشیاء در شناخت رنگ
Reviews of Objects in Color Recognition
کاظم استادی
ostadikazem@yahoo.com
1
محقق و نویسنده
پدیده رنگ از جمله موضوعات و مسائلی است که سالهای زیادی به صورت معما بین برخی فیلسوفان و دانشمندان باقیمانده است و هنوز نظریه قابل قبولی که بتواند تمام مسائل رنگ را توضیح دهید ارائه نشده است. در دوران معاصر، معرفتشناسی یا شناختشناسی در هر موضوعی دارای اهمیت فراوانی شده است. بنابراین پرداختن به پدیده رنگ با روش شناختشناسی نیز، مورد توجه فیلسوفان و دیگر دانشمندان (خصوصاً دانشمندان غربی) واقع شده است. شاید تمامی سؤالات معرفتشناسی را بتوان در مسأله رنگ مورد دقت و تأمل قرار داد. اما پرداختن به این سؤالات شناختشناسی، نیاز به مبانی روشنی از نسبت برخی اشیاء با «رنگ» و نیز «شناخت رنگ» دارد. به نظر میرسد نمیتوان بدون این بررسی نسبتها، جوابگوی سؤالات شناختشناسی رنگ بود. در این نوشتار به عنوان اولین گام، حداقل به پنج عنوان بسیار مهم یعنی «جسم، نور، دستگاه بینایی، مغز و ذهن» و نسبت آنها در شناخت رنگ پرداخته میشود.
The color phenomenon is one of the subjects and matters that has remained as a secret among some of philosophers and scientists and has not been still presented an acceptable theory to explain all the questions and issues of the color.In contemporary times, the epistemology has acquired a great importance in every matters, so the philosophers and some other scientists - specially the western scientists- take the color phenomenon with the epistemological methods into account.Maybe it Will be possible to contemplate and investigate all the epistemological questions about the subject of color, but investigating these kinds of epistemological questions requires the precise basis in the relation of some solids with the color and also knowing the color.It seems that it is impossible to answer the epistemological questions about color without considering those relations.This research would assert to at least five great important subjects as, solid(body), light , sight system , brain, mind and their relation in knowing the color as the first step.
https://jcst.icrc.ac.ir/article_76194_34d50e9023d43527ee82762223be36b5.pdf
رنگ
شناخت رنگ
جسم
نور
دستگاه بینایی
مغز
ذهن
Color
Color epistemology( knowing the color)
solid
light
Sight system
brain
Mind
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
169
176
76195
ارزیابی تأثیر افزودن نانوذرات کاربید سیلیسیم و آلومینا بر خواص مکانیکی نانوکامپوزیت پلییورتان
Evaluation of Mechanical Properties of Polyurethane Nanocomposite Coatings Reinforced with Silicon Carbide and Alumina Particles
آزاده زمانی
azadeh.zamani60@gmail.com
1
علی دهقانی
alidehghani90@gmail.com
2
سید حسین میرحسینی
mirhosseini.jd@gmail.com
3
لیلا شریفی
sharifi.leila.jd@gmail.com
4
دانشگاه آزاد اسلامی واحد نیشابور، دانشجو
نانومواد، جهاد دانشگاهی یزد
نانومواد، جهاد دانشگاهی یزد
نانومواد، جهاد دانشگاهی یزد
هدف از اضافهکردن نانوذرات به پوششهای پلیمری، افزایش مقاومت مکانیکی این نوع پوششها است. در این تحقیق، سه نوع پوشش پلییورتان خالص و پلییورتان حاوی نانوذرات کاربید سیلیسیم و آلومینا با درصد وزنی 1، 2.5، 5 نسبت به وزن پلییورتان آماده شد. پراکندگی و توزیع ذارت در زمینه پلییورتان با استفاده از تصاویر میکروسکوپ الکترونی روبشی بررسی گردید. جهت بررسی خواص پوشش از آزمونهای چسبندگی، سختی و سایش استفاده شد. نتایج آزمونها نشان داد، با افزایش نانوذارت کاربید سیلیسیم تا 5 درصد وزنی، چسبندگی پوشش، سختی و مقاومت سایشی نسبت به پلییورتان خالص کاهش یافت. در حالی که افزایش نانوذارت آلومینا تا 5 درصد وزنی، چسبندگی پوشش تا 25 درصد، سختی از H3 به H5 و مقاومت سایشی حدود 23 درصد نسبت به پلییورتان خالص بهبود بخشید.
The presence of nanoparticles in the polymer matrix will cause an increase in the mechanical performance of nano-composite. In this research the nature of reinforcing material was investigated by mixing pure polyurethane with two different nanoparticles, silicon carbide or alumina. The composition was selected in three levels; 1, 2.5 and 5 in weight percent. The dispersion and distribution of nanoparticles were examined by scanning electron microscopy (SEM). Adhesion, abrasion and hardness tests were applied to study the physical properties of the coated layers. The results were confirmed that in case of silicon carbide by increasing the amount of additive to 5%, all the adhesion, abrasion and hardness values reduced. While by substituting alumina with silicon carbide this trend has been changed to a positive value. Polyurethane-5% Alumina nanoparticles shows 25% increase in adhesion, 23% increase in abrasion and the hardness increases from 3H to 5H.
https://jcst.icrc.ac.ir/article_76195_9baf186713cb8824808a89ef746b9a75.pdf
کاربید سیلیسیم
آلومینا
نانوکامپوزیت
پلییورتان
خواص مکانیکی
Silicon carbide
Alumina
Nano-composite coating
Polyurethane
Mechanical properties
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
177
184
76196
جداسازی و شناسایی جدایه قارچی Neosartorya sp. به عنوان جاذب زیستی ماده رنگزا کنگو قرمز
Isolation and Identification of Fungus Isolated Neosartorya sp. as Congo Red Biosorbent
حمید مقیمی
hmoghimi@ut.ac.ir
1
احسان آذین
ehsanazin@ut.ac.ir
2
رضوان حیدری تبار
rezvan_heidary@ut.ac.ir
3
بیوتکنولوژی، بخش بیوتکنولوژی میکروبی دانشگاه تهران
بیوتکنولوژی، بخش بیوتکنولوژی میکروبی دانشگاه تهران
بیوتکنولوژی، بخش بیوتکنولوژی میکروبی دانشگاه تهران
مواد رنگزای آزو گروهی از مواد رنگزای سخت تجزیهپذیر با پیوندهای آزو میباشند. هدف از این مطالعه جداسازی قارچهای توانمند در جذب مواد رنگزا آزو میباشد. در این مطالعه جداسازی قارچهای توانمند بهطریق غنیسازی صورت گرفت. بررسی توانمندی جدایه منتخب در جذب ماده رنگزا نشان داد که بیشترین حذف ماده رنگزا بعد از 5 روز در غلظت 1000 میلیگرم بر لیتر به میزان 90% میباشد. همچنین این ایزوله توانمندی رشد در 100 گرم بر لیتر نمک را دارا میباشد. شناسایی مولکولی مشخص کرد که این ایزوله 99% مشابه Neosartorya fischeri میباشد. بررسی واجذب ماده رنگزا نشان داد که استون بهترین حلال جهت واجذب میباشد. همچنین نشان داده شد که این جدایه توانمندی بالایی را در جذب مواد رنگزا از پساب نساجی دارا میباشد. بر اساس نتایج بهدستآمده Neosartorya sp. برای اولین بار جهت جذب مواد رنگزا آزو در محیط نمکی مورد استفاده قرار گرفته و میتوان آن را به عنوان جاذب زیستی توانمند بهمنظور تیمار پساب صنایع نساجی معرفی کرد.
Azo dyes are a group of hardly degradable dyes characterized by existence of azo group in their structure. The purpose of present study is the isolation of capable fungi for azo dyes biosorption. Fungi strains isolation was performed by enrichment method. The ability of selected fungal isolate in bio-decolorization was examined using different concentrations of dye. The best dye removal with a rate of 90% at concentration of 1000 mg/l was achieved after 5 days. This fungal isolate is capable to grow in 100 g/L NaCl. Molecular identification revealed 99% similarity to Neosartorya fischeri. Investigation of dye desorption showed that acetone is the best solvent for desorption. It is worth mentioning that, this strain has high ability for biosorption of dyes from textile wastewater. To our knowledge, this is the first report regarding the biosorption potential of Neosartorya sp., and it can be a potent biological agent for treatment of textile effluent.
https://jcst.icrc.ac.ir/article_76196_b156716617f19120edbcea530eadb493.pdf
ماده رنگزا کنگو قرمز
پساب صنایع نساجی
جذب زیستی
Neosartorya Sp
Congo red dye
Textile Effluent
Biosorption
Neosartorya Sp
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
185
193
76197
تأثیر برخی عوامل جلوه ظاهری خودرو بر درک چشمی سیاهی از دیدگاه مشتری
Effect of Some Appearance Factors on Blackness Perception of Automotive Finishes from the Customer Viewpoint
راضیه جعفری
jafari-ra@icrc.ac.ir
1
فرهاد عامری
2
نجمه خلیلی
nkhalili@icrc.ac.ir
3
گروه پژوهشی فیزیک رنگ، مؤسسه پژوهشی علوم و فناوری رنگ و پوشش
گروه پژوهشی فیزیک رنگ، مؤسسه پژوهشی علوم و فناوری رنگ و پوشش
گروه پژوهشی فیزیک رنگ، مؤسسه پژوهشی علوم و فناوری رنگ و پوشش
در این تحقیق تأثیر صفات جلوه ظاهری روکشهای سطح خودرویی در میزان درک سیاهی آنها تحت شرایط نوردهی متفاوت بررسی میگردد. به منظور کاهش اثر مشخصههای رنگی نظیر روشنایی، فام و خلوص در درک چشمی سیاهی، نمونههایی با ویژگیهای رنگی تقریباً یکسان انتخاب میشوند. همچنین با توجه به رویکرد صنعتی- تجاری موضوع، پنلهای انتخابی جهت آزمون از فاکتورهای هندسی بهینه جلوه ظاهری (میزان وضوح تصویر و براقیت بالا و میزان پوست پرتقالی کم) که اغلب مورد پسند مشتریان خودروهای لوکس است، برخوردار بودند. از آزمون مقایسه جفتها جهت ارزیابی چشمی پنلهای مشکی متالیک و تعیین ترتیب سیاهی آنها استفاده شد. نتایج نشان داد که تحت شرایط نوردهی متفاوت (کابینت نوری، نور پراکنده و نور تکسویه)، هیچیک از صفات هندسی جلوه ظاهری خودرو تأثیر معنیداری در درک بصری سیاهی روکشهای سطح خودرویی ندارند.
In this research the effect of appearance factors of automotive finishes on their blackness perception is investigated under various types of illumination. In order to decrease the effect of colorimetric attributes on perceived blackness of panels, samples with nearly identical colorimetric properties, i.e., lightness, chroma and hue, are selected. Regarding the industrial and commercial approach of the subject, the selected panels benefit from the optimum geometric appearance factors (higher values of distinctness of image and gloss as well as lower orange peel values) which are preferred by the majority of luxury vehicles customers. The pair comparison method was used to visually rank the blackness perception of metallic black panels. Results showed that there is not any significant relationship between the geometric appearance factors of automotive finishes and their blackness perception under different types of illumination, i.e., light booth, diffuse illumination and the unidirectional illumination.
https://jcst.icrc.ac.ir/article_76197_069d33e4a33ed392ca2e739321c4f538.pdf
جلوه ظاهری مشتریپسند
روکشهای سطح خودرویی
مؤلفههای رنگی
درک چشمی سیاهی
Customer-friendly appearance
Automotive finishes
Colorimetric coordinates
Visually perceived blackness
per
پژوهشگاه رنگ با همکاری انجمن علمی رنگ ایران
علوم و فناوری رنگ
1735-8779
2383-2169
2016-09-22
10
3
195
206
76198
مطالعه رفتار سینتیکی و قابلیت رنگرزی نخ پشمی با مواد رنگزای طبیعی روناس و قرمزدانه
Study on Kinetic Behavior and Dyeability of Woolen Yarn With Madder and Cochineal Natural Dyes
محمدرضا شاهپروری
mrshahparvari@yahoo.com
1
سیامک صفاپور
s.safapour@gmail.com
2
کمالالدین قرنجیگ
gharanjig@icrc.ac.ir
3
فرش، هنر اسلامی تبریز
دانشکده فرش، دانشگاه هنر اسلامی تبریز
گروه پژوهشی مواد رنگزای آلی، قطب علمی رنگ، موسسه پژوهشی علوم و فناوری رنگ و پوشش
در این پژوهش رفتار سینتیکی و قابلیت رنگرزی نخ پشمی با دو ماده رنگزای طبیعی روناس و قرمزدانه مورد مطالعه قرار گرفت. سرعت رنگرزی نخ پشمی با دو ماده رنگزای روناس و قرمزدانه در دماها و زمانهای مختلف بررسی شد. نتایج نشان داد که سرعت رنگرزی نخ پشمی با دو ماده رنگزا از رابطه سرعت پترسون پیروی کرده و مقادیر ثابت سرعت آنها برای مواد رنگزای قرمزدانه و روناس به ترتیب برابر با 0.0341- 0.0031 و 0.0318- 0.0024 به دست آمد. همچنین نتایج نشان داد که دما عامل موثری در تغییر رفتار سینتیکی رنگرزی نخ پشمی میباشد. به طوری که با افزایش دمای حمام، سرعت رنگرزی و زمان تعادل رنگرزی با هر یک از مواد رنگزا افزایش مییابد. بررسی قابلیت رنگرزی نخ پشمی نشان داد که ماده رنگزای قرمزدانه از قابلیت رنگرزی بالاتری در مقایسه با ماده رنگزای روناس برخوردار است، به طوری که نخ پشمی با غلظت حدود 20% از ماده رنگزای قرمزدانه و 60% از ماده رنگزای روناس نسبت به وزن کالا به نقطه اشباع میرسد. محاسبه ضریب نفوذ دو ماده رنگزا بر روی نخ پشمی با استفاده از رابطه هیل نشان داد که دما نقش موثری در تعیین میزان ضریب نفوذ مواد رنگزا دارد، به طوری که با افزایش دمای حمام رنگرزی از 30 به 95 درجه سانتیگراد، مقادیر ضریب نفوذ ماده رنگزای روناس از 11-10×0.83 تا 11-10×7.4 و ماده رنگزای قرمزدانه از 11-10×1.02 تا 11-10×11.32 افزایش یافته است. به طور کلی نتایج این مطالعه نشان داد که مقادیر ثابت سرعت و ضریب نفوذ ماده رنگزای قرمزدانه بر روی نخ پشمی از ماده رنگزای روناس بیشتر است.
In this study, kinetic behavior and dyeability of woolen yarns with madder and cochineal natural dyes were investigated. Dyeing rate was separately calculated for each dye at different times and temperatures. Results showed Patterson’s rate equation as the best model to describe dyeing rate in which rate constants in the range of 0.0031-0.0341 and 0.0024-0.0318 were obtained for cochineal and madder, respectively. Dyeing temperature had essential role on kinetic behavior and with the increase of temperature, dyeing rate and equilibrium time increased. Cochineal demonstrated better dyeability on wool than madder. Saturation point on wool was achieved using 20% and 60% owf of cochineal and madder dyes, respectively. Diffusion coefficient values at different temperatures were calculated from Hills’ equation, and it was found that temperature had key role on diffusion values. As temperature raised from 30 to 95 °C, diffusion coefficients increased from 0.83×10-11 to 7.4×10-11 in the case of madder and from 1.02×10-11 to 11.32×10-11 in the case of cochineal dye. Overall, the results of this study confirmed better dyeing performance, higher rate constant and diffusion coefficient for cochineal on wool compared to madder.
https://jcst.icrc.ac.ir/article_76198_c76ab9d32651cbb69484d1fc26e279c2.pdf
سینتیک رنگرزی
روناس
قرمزدانه
مواد رنگزای طبیعی
الیاف پشم
Dyeing kinetic
Madder
Cochineal
Natural Dye
Wool fiber