@article { author = {Parvinzadeh, M. and Eslami, Sh. and Almasian, A.}, title = {Thermal Oxidation of Iron on Clay to Obtain Clay-Nano Iron Oxide (II) Pigment: Evaluation of Thermal, Colorimetric and Electromagnetic Properties}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {1-11}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, nano-iron oxide was synthesized on the surface and between clay layers using sodium carbonate and iron nitrate after thermal oxidation in 400 ° C. X-ray diffraction from synthesized pigment showed the presence of nano-iron oxide II crystals on the surface of the pigment. Moreover, thermal measurement of nano-iron oxide-clay pigment showed an improvement of thermal stability in comparison with clay. SEM and EDX results showed the presence of chemical elements of Fe, Al and Si on the surface of clay. Reflectance properties of nano-iron oxide-clay pigment showed that the intensity of reflectance in visible region and lightness value of pigment is decreased which is due to deposition of iron oxide nano-particle in the final pigment compound. Results from electromagnetic test showed an increased electromagnetic absorbance in clay/nano-iron oxide pigment in comparison with clay.}, keywords = {Iron particles on clay,Thermal Oxidation,Reflectance spectrophotometer,Electromagnetic waves instrument}, title_fa = {اکسیداسیون حرارتی آهن بر روی رس جهت تهیه رنگدانه رس- نانواکسید آهن (2): بررسی خصوصیات حرارتی، رنگی و الکترومغناطیسی}, abstract_fa = {در این تحقیق نانوذرات اکسید آهن در سطح و در میان لایه‌های رس با استفاده از کربنات سدیم و نیترات آهن پس از اکسیداسیون حرارتی در دمای 400 درجه سانتی‌گراد تهیه شدند. پراش پرتو ایکس از رنگدانه سنتز شده وجود بلور‌های نانواکسید آهن 2 در سطح رنگدانه را نشان داد. به علاوه آزمون حرارتی از رنگدانه نانواکسید آهن-رس بهبود مقاومت حرارتی رنگدانه را در مقایسه با رس نشان داد. نتایج آزمون‌های میکروسکوپی و اسپکترومتر تفرق پرتو X حضور عناصر آهن، آلومینیم و سیلیسیم را بر سطح رس نشان دادند. بررسی خصوصیات انعکاسی رنگدانه نانواکسید آهن-رس نشان داد که به دلیل قرارگیری نانوذرات اکسید آهن در ترکیب نهایی رنگدانه، شدت انعکاس نور در ناحیه مرئی و میزان روشنایی رنگدانه کاهش می‌‌یابد. نتایج آزمون الکترومغناطیس نشان دهنده افزایش جذب امواج در رنگدانه نانواکسید آهن ـ رس در مقایسه با رس می‌‌باشد.}, keywords_fa = {ذرات آهن اکسید شده بر رس,اکسیداسیون حرارتی,اسپکتروفتومتر انعکاسی,دستگاه تولید امواج الکترومغناطیس}, url = {https://jcst.icrc.ac.ir/article_76109.html}, eprint = {https://jcst.icrc.ac.ir/article_76109_eae3de64ca4a3b68af62dd4179015dab.pdf} } @article { author = {Fathyunes, L. and Azadbeh, M.}, title = {Mechanical Activation Effect of Plain Carbon Steel on Morphology and Paint Adhesion Quality of Zinc Phosphate Coating}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {13-25}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, the effect of different surface activation methods on characteristics of phosphate coating, such as morphology and paint adhesion quality, was investigated. The SEM micrographs showed that, surface activation by sandblasting, leads to formation of fine-grained and more compact coating including phosphate crystallites with the average length of 57.65 μm due to increasing the active centers for nucleation. While, the phosphate crystallites size of formed coating on the shot blasted or grinded surface were with the average length of 169.72 μm and 118.14 μm, respectively. Also, the SEM investigations showed that by using rephosphating as an innovative method, further reduction in the phosphate crystallites size to about 24.99 μm was obtained. EDX analysis and further SEM investigation confirmed that the formation of such coating could be in consequence of dissolution of base metal during first stage coverage and entrapping the small debris of initial phosphate layer in these regions, which can be act as nucleation sites during rephosphating. However, paint adhesion increases using phosphate coating, significant improving in adhesion was obtained with applying dense phosphate layer. On the other hand, by formation of denser coating with improved protective properties, the quality of wet adhesion of paint increases.}, keywords = {Mechanical activation,Rephosphating,Fine grain and compact structure,Quality of paint adhesion}, title_fa = {تاثیر روش‌های مختلف فعال‌سازی مکانیکی سطح فولاد ساده کربنی بر ساختار پوشش فسفاته روی و کیفیت چسبندگی رنگ}, abstract_fa = {در تحقیق کنونی به بررسی تاثیر روش‌های مختلف فعال‌سازی مکانیکی سطح فولاد ساده کربنی، بر ویژگی‌های پوشش فسفاته حاصله نظیر ساختار و قدرت بهبود چسبندگی رنگ پرداخته شد. تصاویر SEM نشان داد که فعال‌سازی سطح توسط عملیات ماسه‌پاشی، به دلیل افزایش مراکز فعال جوانه‌زنی، سبب تشکیل پوشش ریزدانه و متراکم‌تر شامل بلورهای فسفاته با متوسط ابعاد طولیm μ 57.65 شد که در مقایسه با بلورهای تشکیل شده بر روی سطوح فعال‌سازی شده توسط ساچمه‌پاشی و سنباده‌زنی به ترتیب با متوسط ابعاد طولی 169.72 وm μ 118.14، کاهش چشمگیری را داشت. همچنین، بیشترین و چشمگیرترین کاهش در متوسط ابعاد طولی بلورهای فسفاته به حدودm μ 24.99، در پوشش اعمالی به روش ابداعی معرفی شده در این تحقیق تحت عنوان فسفاته‌کاری مجدد مشاهده شد. مقایسه نتایج آنالیز عنصری EDX و SEM از سطح فلز پایه پس از سنباده زنی اولیه و نیز پس از پوشش‌زدایی سطح توسط سنباده‌زنی مجدد نشان داد که ذراتی از بلورهای فسفاته اولیه در طول پوشش‌زدایی در نواحی انحلال یافته سطح فلزپایه و شیارهای حاصل از سنباده‌زنی مجدد به دام افتاده‌اند که این ذرات در طول فسفاته‌کاری مجدد به عنوان مراکز جوانه‌زنی عمل می‌کنند. نتایج آزمون چسبندگی نیز نشان داد که فسفاته‌کاری، قدرت اتصال لایه رنگ به سطح فلز پایه را افزایش می‌دهد و هر چه ساختار پوشش اعمالی ریزدانه و یکنواخت‌تر باشد، بهبود بیشتری در کیفیت چسبندگی رنگ حاصل می‌شود. از طرفی نتایج نشان داد که با اعمال لایه عایق فسفاته بر روی سطح و افزایش خواص حفاظتی آن در نتیجه کاهش اندازه بلورهای فسفاته و تراکم بالای پوشش، کیفیت چسبندگی‌تر به دلیل ممانعت بیشتر از خوردگی زیر لایه رنگ، ترفیع یافت.}, keywords_fa = {فعال‌سازی مکانیکی سطح,فسفاته‌کاری مجدد,ساختار ریز‌دانه و متراکم,کیفیت چسبندگی رنگ}, url = {https://jcst.icrc.ac.ir/article_76110.html}, eprint = {https://jcst.icrc.ac.ir/article_76110_4e2b498854bbc1f0e4db93742ad5d013.pdf} } @article { author = {Karimi, A. and Vatankhah, Gh.}, title = {Characterization of Paint Binder in Historical Persian Paintings by ATR-FTIR}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {27-36}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {One of important aspects in the field of Art technology and conservation of Persian historical paintings is the characterization of binder (or binding medium) used in paints. The basic rule in this field is identification of historic materials without destruction of the works or the sample taken from them. ATR-FTIR (attenuated total reflectance-FTIR) is one of the common non destructive methods for characterizing organic materials in paintings. In this paper samples prepared using common binders of Persian paintings, have been tested for the evaluation of ATR-FTIR method. In the second step real historic samples have been tested. Results showed that the method is efficient in classification of binders (to hydrocarbon, protein and drying oil groups), but is not perfectly successful in detailed identification. Detailed research needs other test methods.}, keywords = {binder,Persian Painting,Proteins,Drying oils,ATR,FTIR}, title_fa = {شناخت بست‌‌ (پیونده) در رنگ نقاشی‌های تاریخی ایران به روش ATR-FTIR}, abstract_fa = {شناخت بست یا پیوند در رنگ‌ نقاشی‌های تاریخی ایران یکی از جنبه‌های مهم در شناخت و حفاظت این آثار هنری است. اصل مهم در روند شناخت آثار هنری، اجرای روش شناسایی بدون تخریب اثر تاریخی یا تخریب نمونه‌ی برداشت شده از آن است. روش ATR-FTIR از روش‌های غیرتخریبی مرسوم در جهان برای شناخت مواد آلی در نقاشی است. در تحقیق حاضر برای بحث در مورد کارایی این روش در مورد بست‌های مرسوم در نقاشی ایران، به نمونه‌سازی و آزمایش نمونه‌های جدید و سپس آزمون این روش بر روی نمونه‌های تاریخی پرداخته شده است. در نتیجه‌ی این بررسی، می‌توان روش مذکور را برای شناخت و دسته‌بندی انواع بست‌ها در مرحله اولیه (هیدروکربن‌ها، پروتئین، روغن خشک‌شونده) کارآمد دانست، ولی شناخت جزیی‌تر بست‌های هر گروه نیاز به آزمایش با روش‌های دیگری وجود دارد.}, keywords_fa = {بست,نقاشی ایران,پروتئین,روغن‌های خشک‌شونده,FTIR,ATR}, url = {https://jcst.icrc.ac.ir/article_76111.html}, eprint = {https://jcst.icrc.ac.ir/article_76111_9801b180cf48dc8c5fc495db6cbd5115.pdf} } @article { author = {Talebnia, F. and Nourmohammadian, F. and Bastani, S.}, title = {Investigation on Effects of Different Resin Media on Reflectance Properties of Disperse Yellow 232}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {37-46}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this research, disperse yellow 232 was synthesized, purified and subjected to spectroradiometric study in different resin media. Alkyd, maleic and phenolic resins as common useful resins in offset printing inks were applied to study the effects of different media on fluorescent emission of the dye. Reflectance curves in two UV-cut and UV-add statuses were measured under A light source. The emissions in the different media were calculated in two different ways. First, calculation of emission intensities differences in UV-cut and UV-add reflection curves in maximum emission wavelength, and second, calculations of difference area between the two curves were measured, and the results were in good accordance.}, keywords = {Coumarin,Fluorescent dye,reflectance,Printing ink,Offset printing}, title_fa = {بررسی اثر بسترهای رزینی بر خواص نشری- انعکاسی ماده رنگزای فلورسنت زرد دیسپرس 232}, abstract_fa = {در این تحقیق ماده رنگزای فلورسنت زرد دیسپرس 232 سنتز گردید و خواص نشری و رنگ‌سنجی این رنگزای خالص در بستر رزین‌های مورد استفاده در چاپ افست با استفاده از دستگاه اسپکترورادیومتر مورد مطالعه قرار گرفت. رزین‌های مورد آزمایش رزین آلکید بلند روغن، ورنی مالئیک و ورنی فنولیک هیت ست می‌باشند. منحنی انعکاسی برای تمامی نمونه‌ها در دو حالت حذف و اضافه شدن منبع نوریUV به منبع نوری A اندازه‌گیری شد و میزان نشر فلورسانس به دو روش محاسبه گردید. روش اول اختلاف انعکاس دو منحنی انعکاسی در طول موج بیشینه نشر و روش دوم اختلاف سطح زیر دو منحنی انعکاسی می‌باشد. مشاهده شد که نتایج هر دو روش، روند مشابهی را نشان می‌دهند.}, keywords_fa = {کومارین,ماده رنگزای فلورسنت,انعکاس,مرکب چاپ,چاپ افست}, url = {https://jcst.icrc.ac.ir/article_76112.html}, eprint = {https://jcst.icrc.ac.ir/article_76112_9b70486fdfb6a3269707ea24567951c4.pdf} } @article { author = {Ahmadi Moghaddam, H.}, title = {Fabricating, Determining Stability and Study of Optical Properties of Novel Glazes Based on Nb2O5, La2O3 and PbO-B2O3 Glass Systems}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {47-57}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {B2O3-PbO, La2O3, Nb2O5 base glasses have uses in electro-optics, special reflective glazes and semi-mirror glasses. The aim of utilising of these glass systems as glaze bases is to attain special optical properties, for example, ultra high refractive index and low dispersion. In this research, B2O3, as a strong glass-former, hosted great amounts of PbO, La2O3 and Nb2O5. They were mostly colourless, or had low colour shades. The challenge was to achieve ultra-high optical properties stable glasses. Thermal Differential Analysis, DTA, experiments were carried out to determinate the glass stability. From the stable glasses, accurate slabs, circular bars and prisms were prepared for measuring optical properties. High refractive index and light dispersion were measured by minimum angle of deviation in prism. Results indicated that the stable glasses were limted. The light dispersion was low i.e. Abbe No.>10, and the relative reflection was 8-14.}, keywords = {Glaze base,High refractive index and glazes,Heavy element oxides,Stable glassy structures}, title_fa = {ساخت، تعیین محدوده پایداری و بررسی خواص نوری لعاب‌های ویژه پایه شیشه‌ای PbO- B2O3، La2O3 و Nb2O5}, abstract_fa = {شیشه‌های پایه بوراتی PbO-B2O3 La2O3- و Nb2O5 در ساخت ابزار فوتونیک، اوپتوالکترونیک، نیمه آینه‌ها، انامل، پوشش‌ها یا لعاب‌های براق و آویزهای شیشه‌ای با خواص انعکاسی بالا برای تزیینات خانگی و غیره، کاربرد فراوان دارند. هدف از به کارگیری این نوع شیشه‌ها به عنوان لعاب پایه، نیل به خواص نوری ویژه نظیر ضریب شکست بالا و خواص تجزیه نوری پایین می‌باشد. در این تحقیق ابتدا، شیشه‌ساز قوی B2O3، با مقادیر بالا و مختلفی از اکسیدهای عناصر سنگین مانند: PbO، La2O3 و Nb2O5 مخلوط و ذوب شدند. این شیشه‌ها ظاهری شفاف، بدون رنگ یا کم رنگ داشتند. چالش قابل توجه در این تحقیق، دستیابی به شیشه‌های پایدار و یکنواخت با خواص نوری بالا بود. به منظور تعیین محدوده‌های حرارتی مانند: ذوب، بلوری شدن، دگرگونی و میزان پایداری، آنالیز حرارتی (DTA) از نمونه‌های پایدار انجام گرفت. از نتایج حاصله، محدوده شیشه‌ای پایدار در نمودارهای سیستم شیشه‌ای B2O3-PbO-La2O3 و B2O3-PbO-Nb2O5، در نواحی PbO بالا، مشخص شد. برای اندازه‌گیری خصوصیات نوری از قبیل: ضریب شکست و خواص تجزیه نوری دقیق، از نمونه‌های پایدار شکل‌های مختلف مانند: قطعات نازک، میله و منشورهای مناسب، طراحی، تراشیده و صیقل شدند. نتایج و منحنی‌های حاصله در این تحقیق بیانگر خواص تجزیه پایین (عدد آبه}, keywords_fa = {لعاب پایه,ضریب شکست و انعکاس بالا,تجزیه نور,اکسیدهای عناصر سنگین,ساختار شیشه‌ای پایدار}, url = {https://jcst.icrc.ac.ir/article_76113.html}, eprint = {https://jcst.icrc.ac.ir/article_76113_f657f7bc0f7eb71c149629c0486d47a8.pdf} } @article { author = {Tahmassebi, N. and Marashi, R.}, title = {The Effect of Industrial and Marine Industrial Atmospheres on Performance of Zinc Rich Epoxy and Zinc Ethyl Silicate Coating Systems}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {59-74}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, the influences of thickness on the weathering performance of coating systems including zinc rich epoxy or ethyl silicate primer, epoxy/polyamide surfacer and polyurethane topcoat were investigated. Natural weathering was evaluated in Arak in center of Iran and Mahshahr located near Persian Gulf. The results showed that gloss retention of the systems exposed to Arak was higher and there was a relatively low variation in yellowness index of the systems that can be attributed to gradual surface erosion. Surface erosion, postcuring and photodegradation of the topcoat also caused a fluctuating variation in hardness of the systems. In addition, the results presented that 800 hours accelerated weathering was equal to 7 months natural weathering in Mahshahr. It was also found that an increase in thickness increased cyclic corrosion resistance of the epoxy systems, while, no defects were detected on surface of all the systems during salt spray and natural weathering.}, keywords = {Zinc rich epoxy,Zinc ethyl silicate,Natural weathering,Accelerated weathering,Salt Spray,Cyclic corrosion}, title_fa = {تاثیر شرایط جوی صنعتی و دریایی صنعتی بر عملکرد سامانه‌های پوششی اپوکسی غنی از روی و اتیل سیلیکات روی}, abstract_fa = {در این مطالعه تاثیر ضخامت آسترهای اپوکسی و اتیل سیلیکات، پوشش‌های میانی و رویه اپوکسی آمید و پلی یورتان بر عملکرد یک ساله آنها در شرایط جوی اراک و ماهشهر بررسی شد. نتایج نشان داد که افت براقیت سامانه‌ها در ماهشهر بیشتر است و با وجود افزایش اولیه شاخص زردی، فرسایش تدریجی سطح سامانه‌ها موجب گردید تا تغییرات چندانی در این عامل مشاهده نشود. همچنین واکنش‌های تکمیل پخت و نوراکسایشی همراه با فرسایش سطحی موجب بروز تغییرات نوسانی در سختی سامانه‌ها گردید. مقایسه افت براقیت در آزمایش‌های طبیعی و شتاب یافته جوی نیز نشان داد که 800 ساعت آزمایش شتاب یافته معادل با 7 ماه شرایط جوی ماهشهر است. بعلاوه درحالی که مقاومت به خوردگی چرخه‌ای سامانه‌های اپوکسی تحت تاثیر ضخامت آنها بود، اثری از خوردگی طی آزمایش‌های مه نمکی و شرایط جوی طبیعی بر روی هیچ یک از سامانه‌ها مشاهده نگردید.}, keywords_fa = {اپوکسی غنی از روی,اتیل سیلیکات روی,شرایط جوی طبیعی,شرایط جوی شتاب‌یافته,مه نمکی,خوردگی چرخه‌ای}, url = {https://jcst.icrc.ac.ir/article_76114.html}, eprint = {https://jcst.icrc.ac.ir/article_76114_2e599a14f18a4a7d3dbc8af74fe04c8d.pdf} } @article { author = {Razavi, F. and Ghahari, M. and Rashidi-Huyeh, M.}, title = {Production and Characterization of a Lustre Glaze on Arcopal Body}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {75-83}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Lustre production technique is one of the oldest methods of metal nanoparticles fabrication depended on chemical reducing atomosphere. This kind of ceramics is consisted of three steps; body production, applying white glaze on a body and after baking, recovering the lustre glaze on the opaque white glaze. Lustre has fascinating features due to the formation of a thin layer and metal nanoparticles. In this situation, the sample appears in different colors by changing the incident light angle. This happens due to the nano structures created during the manufacturing of the glaze. In this research, a new combination of lustre glaze was produced which is suitable for Arcopal body. Therefore, numbers of thermal treatment steps were reduced from 3 steps to one step. SEM analysis was used to identify the thickness of the thin layer. The layer varies between 200 to 400 nm. The theoretical studies and stimulation of the reflection spectra at different angles show that these results have good agreements with the experimental ones.}, keywords = {lustre,Silver nanoparticles,Arcopal}, title_fa = {بررسی و ساخت مینای زرین‌فام روی بدنه آرکوپال}, abstract_fa = {مینای زرین‌فام پوششی دکوری است که از دیرباز، سفالگران آن را به عنوان لعاب تزئینی به کار می‌برده‌اند. مشخصه‌ی بارز این نوع لعاب، تلالو و درخشندگی منحصر به فرد آن است. به گونه‌ای که در زوایای مختلف به رنگ‌های متفاوت دیده می‌شود. این ویژگی‌ها از یک سو به تشکیل لایه‌های نازک و از سوی دیگر به تشکیل نانوذرات فلزی، در اینجا نقره، حین فرآیند تولید است. در این تحقیق، لعاب زرین فام با ترکیب جدید مناسبی برای بدنه آرکوپال تهیه شد و در نتیجه تعداد مراحل پخت از 3 به 1 مرحله کاهش یافت. آنالیزهای SEM و الگوی عنصری انجام شده روی نمونه‌های تولید شده، مبین وجود لایههای نازک مینای زرینفام، متشکل از نانوذرات محصور در محیط سیلیس، با ضخامت متوسط حدود 200 الی nm 400 می‌باشد. نتایج حاصل از مطالعات نظری و شبیه‌سازی از طیف بازتابی در زوایای مختلف تطابق بسیار خوبی را با نتایج تجربی نشان می‌دهد.}, keywords_fa = {لعاب زرین فام,نانو ذرات نقره,‌آرکوپال}, url = {https://jcst.icrc.ac.ir/article_76115.html}, eprint = {https://jcst.icrc.ac.ir/article_76115_7c50bcd33caf903329736328c06d98e9.pdf} } @article { author = {Mahyar, F. and Izadan, H. and Taghavi, L. and Sadeghian Nodoushan, S.}, title = {An Investigation into the Meaning of Colour Harmony Using Psychophysical Techniques}, journal = {Journal of Color Science and Technology}, volume = {8}, number = {1}, pages = {85-92}, year = {2014}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Due to the lack of consistency in defining colour harmony by different people, the present research was focused on finding the meaning of colour harmony. The relationships between colour harmony and colour pleasantness, beauty, calmness, and hue contrast were examined in order to fascinate the selections of the most harmonious colour combinations in different applications. A psychophysical experiment carried out for two colour combinations. On the basis of a novel method of data analysis, the results show that the term of colour harmony is not the same as any of the inspected colour terms. However, the meaning of colour harmony is much closer to the meaning of the colour beauty and the colour calmness. The concepts of colour beauty and colour pleasantness are also similar to each other. Furthermore, it seems that the male observers have a less tendency in selecting the complementary colour harmony pairs than the female observers.}, keywords = {Colour harmony,Colour beauty,Colour pleasantness,Colour calmness,Hue contrast}, title_fa = {بررسی معنایی هارمونی رنگی با استفاده از روش‌های روان- فیزیکی}, abstract_fa = {به نظر می‌رسد تعریفی واحد برای هارمونی رنگی وجود ندارد و افراد مختلف، هارمونی رنگی را مشابه یا نزدیک به مفهوم رفتارهای مختلف رنگی ارزیابی می‌کنند. با هدف بررسی مفهوم هارمونی رنگی و در صورت وجود، یافتن تعریفی واحد برای آن، روابط بین هارمونی رنگی با خوشایندی، زیبایی، آرامش و تباین فام رنگی، با تدوین و ارائه یک آزمایش روان- فیزیکی مورد بررسی قرار گرفت. بر پایه روش‌های آماری نوین در تجزیه و تحلیل داده‌ها، نتایج نشان می‌دهد که هیچ یک از رفتارهای احساسی مورد بررسی نمی‌توانند دقیقا هم معنی با مفهوم هارمونی رنگی باشند. در میان رفتارهای رنگی مورد بررسی، زیبایی و آرامش رنگی ارتباط معنایی بهتری را با هارمونی رنگی دارند. همچنین دو رفتار خوشایندی و زیبایی رنگی ارتباط خوبی را با یکدیگر نشان می‌دهند. بر اساس نتایج تحقیق، مشاهده‌کننده‌های مذکر تمایل کمتری به انتخاب ترکیب‌های رنگ‌های هارمونی مکمل نشان می‌دهند.}, keywords_fa = {هارمونی رنگی,زیبایی رنگی,خوشایندی رنگی,آرامش رنگی و تباین فام رنگی}, url = {https://jcst.icrc.ac.ir/article_76116.html}, eprint = {https://jcst.icrc.ac.ir/article_76116_9c114d6ace8952fc46c4454271fcc961.pdf} }