@article { author = {Almasian, A. and Parvinzadeh, M.}, title = {Discoloration of a Basic Dye on Wool Fibers Coated with Nano-ZrO2 under UV Irradiation}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {1-13}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The present research carried out to stabilize nano-zirconium dioxide on a wool fabric using citric acid as a crosslinking agent and sodium hypophosphite as a catalyst under UV irradiation. The influence of the amount of nano-ZrO2 on the performance of wool fiber was investigated using Fourier transform infrared spectrophotometer (FTIR), scanning electron microscope (SEM), energy dispersive X-ray microanalysis (EDX), water contact angle test (WCA) and reflectance spectrophotometer (RS). The possible interactions between nano-zirconia particles, cross-linking agent and wool free radicals were elucidated by the FTIR spectroscopy. Results indicated that the stabilized nano-zirconia is capable for discoloration of methylene blue on wool under UV irradiation.}, keywords = {wool,Citric acid,Reflectance spectra,Discoloration,Nano-ZrO2}, title_fa = {رنگبری رنگزای بازیک بر روی الیاف پشم پوشش داده شده با نانو ذرات دی‌اکسید زیرکونیم با پرتودهی فرابنفش}, abstract_fa = {پژوهش حاضر به منظور تثبیت نانو ذرات دی اکسید زیرکونیم برروی پشم با استفاده از اسید سیتریک به ‌عنوان عامل اتصال‌دهنده عرضی و هیپوفسفیت سدیم به‌عنوان کاتالیزور با پرتودهی فرابنفش انجام شده است. تأثیر مقدار نانوذرات بروی عملکرد لیف پشم توسط طیف‌سنجی زیر قرمز تبدیل فوریه (FTIR)، میکروسکوپ الکترونی (SEM)، اسپکترومتر الکترونی تفرق پرتو X (EDX)، آزمون زاویه تماس قطره آب (WCA) و اسپکتروفوتومتر انعکاسی (RS) بررسی شده است. برهم‌کنش مابین نانو ذرات دی اکسید زیرکونیم، ماده تثبیت‌کننده و رادیکال‌های آزاد پشم توسط طیف FTIR ارزیابی شده است. نتایج نشان می‌دهد که پشم پوشش داده شده با نانو ذره قابلیت رنگبری رنگزای متیلن آبی با پرتودهی فرابنفش را دارد.}, keywords_fa = {پشم,اسید سیتریک,طیف انعکاسی,رنگبری,نانو دی‌اکسید زیرکونیم}, url = {https://jcst.icrc.ac.ir/article_76073.html}, eprint = {https://jcst.icrc.ac.ir/article_76073_7f2f5b4bd6da081fe9c2188d25522f19.pdf} } @article { author = {Shams nateri, A. and Hajipour, A.}, title = {The Measuring Opacity of Paper by Scanner}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {15-24}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The opacity is one of the important properties of various commercial products such as paper. The common opacity measurement method by using spectrophotometer is expensive. This work explains the novel method for measuring opacity by using scanner as a lower cost instrument. The opacity is evaluated by using RGB value of paper image which was obtained by scanner. The obtained results indicate that opacity measurement performance of scanner is comparable with spectrophotometer. The best opacity estimation is obtained conversion RGB to CIELab color space.}, keywords = {Opacity,paper,Measurement,Scanner,Spectrophotometer}, title_fa = {اندازه‌گیری ضریب پشت‌پوشی کاغذ با استفاده از پویشگر}, abstract_fa = {پشت‌پوشی، یکی از خصوصیات مهم محصولات تجاری مختلف از جمله کاغذ می‌باشد. روش معمول اندازه‌گیری به کمک اسپکتروفوتومتر گران می‌باشد. این کار تحقیقاتی روش جدیدی برای اندازه‌گیری پشت‌پوشی به کمک پویشگر به‌عنوان یک ابزار کم‌هزینه‌تر بیان می‌کند. پشت‌پوشی براساس مقادیر RGB تصاویر کاغذ حاصله از پویشگر محاسبه می‌گردد. نتایج حاصله بیانگر این است که قابلیت اندازه‌گیری پشت‌پوشی توسط پویشگر با اسپکتروفوتومتر قابل مقایسه می‌باشد. بهترین نتیجه بر اساس تبدیل RGB به فضای رنگی CIELab حاصل گردید.}, keywords_fa = {پشت‌پوشی,پویشگر,کاغذ,اندازه‌گیری,اسپکتروفوتومتر}, url = {https://jcst.icrc.ac.ir/article_76074.html}, eprint = {https://jcst.icrc.ac.ir/article_76074_76ab16721a1009a020d64e2accba847f.pdf} } @article { author = {Goudarzi, U. and Mokhtari, J. and Nouri, Mahdi}, title = {Camouflage of Cotton Fabrics in Visible and Near Infrared Region Using Vat Dyes}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {25-35}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Three vat dyes, namely C.I. Vat Blue 6, C.I. Vat Yellow 2 and C.I. Vat Red 13, were employed on cotton fabrics in order to provide camouflage in NIR region and imitate reflectance profile of greenish leaves. Results showed that the reflectance curve of dyed fabric with the mixture of dyes when concentration of Vat Blue 6 is 0.85% (owf) and 1.2% (owf), has more similarity with reflectance profile of greenish leaf, which states that vat blue 6 plays an important role in NIR camouflage. Green shades related to deciduous tree leaf and coniferous needle, NATO and forest green were received on cotton fabrics with color difference less than 2, in CIE1976 color space. The results of statistical analyses confirmed the matching of reflectance curves of the samples and the standard (0}, keywords = {Camouflage,NIR,cotton fabric,NATO green,Forest green,Vat Dye}, title_fa = {استتار منسوج پنبه‌ای در ناحیه مرئی و زیر قرمز نزدیک با استفاده از رنگزای خمی}, abstract_fa = {سه رنگزای خمی آبی 6، زرد 2 و قرمز 13 برای ایجاد استتار در ناحیه زیر قرمز نزدیک و تقلید طیف انعکاسی سه نوع برگ سبز استاندارد روی کالای پنبه‌ای به کار گرفته شد. نتایج نشان داد که طیف انعکاسی کالای رنگرزی شده با مخلوطی از رنگزاها هنگامی که درصد رنگزای خمی آبی 6 نسبت به وزن کالا برابر 0.85 % و 1.2 % باشد، بیشترین شباهت را با طیف انعکاسی برگ سبز دارد که نشان‌دهنده نقش مهم خمی آبی 6 در استتار زیر قرمز نزدیک است. شیدهای سبز مربوط به برگ درختان برگ‌ریز و سوزنی‌برگ، سبز ناتو و سبز جنگلی با اختلاف رنگ کمتر از دو واحد در فضارنگ CIE1976 روی پارچه پنبه‌ای به دست آمد. نتایج آنالیز آماری نیز همانندی منحنی‌های انعکاسی نمونه‌ها و استاندارد را تأیید کرد (1>}, keywords_fa = {استتار,زیر قرمز نزدیک,پارچه پنبه‌ای,سبز ناتو,سبز جنگلی,رنگزای خمی}, url = {https://jcst.icrc.ac.ir/article_76075.html}, eprint = {https://jcst.icrc.ac.ir/article_76075_d684bb9681375e3fe4972e6049ac57e6.pdf} } @article { author = {Hashemi-Nasab, S.R. and Mirabedini, S.M. and Khorasani, M. and Kalaee, Mohammadreza}, title = {Surface Modification of Fumed Silica Nanoparticles with a Methacryloxypropyltrimethoxy Silane Coupling Agent and the Effect of Nanoparticles Surface Treatment on the In-situ Polymerization of Styrene - Butyl Acrylate}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {37-46}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this work, the effects of methacryloxypropyltrimethoxy silane (MPTMS) molar ratio, reaction’s pH and time, and water amount on the surface modification of fumed silica nanoparticles were studied. Possible interactions between the silane coupling agent and the functional groups on the surface of the silica nanoparticles were studied using Fourier Transform Infrared (FTIR) spectroscopy. The grafting of MPS compounds on the nanoparticles surface was characterized using Thermo Gravimetric Analysis (TGA) technique. Then untreated (PSB-Si) and treated (PSB-MPS) fumed silica nanoparticles were included into the styrene: butyl acrylate wt. % ratio of 1:1 emulsion latex, throughout in-situ polymerization method. The synthesized latex samples were characterized using; FTIR and Laser Light Scattering (LLS) techniques. The results of characterization studies revealed the chemical interactions of silane compounds with silica nanoparticles with about 32 wt. % grafting. The silane and water amount, reaction time and pH, have significant effect on the nanoparticles grafting as a result of higher silane hydrolysis. The result of LLS and FTIR studies indicated that the polymerization reaction performed successfully and the inclusion of either untreated or treated nanoparticles has a main effect on the latex particles size.}, keywords = {Silica Nanoparticles,Alkoxy silane,Surface modification,In-situ Polymerization}, title_fa = {اصلاح نانو ذرات سیلیکا با متاکریلواکسی پروپیل تری‌متوکسی سیلان و بررسی اثر نانو ذرات اصلاح شده بر پلیمریزاسیون درجای کوپلیمر استایرن- بوتیل اکریلات}, abstract_fa = {در این تحقیق، اثر مقدار متاکریلواُکسی پروپیل تری متوکسی سیلان (MPTMS)، زمان و pH واکنش و نیز مقدار آب بر اصلاح سطحی نانوذرات سیلیکا بررسی شده است. برهم‌کنش‌های شیمیایی احتمالی بین ترکیب سیلان‌دار و گروه‌های عاملی سطح نانوذرات سیلیکا به روش طیف‌سنجی FTIR و میزان جذب شیمیایی و یا فیزیکی ترکیب سیلان‌دار بر روی سطح نانوذرات با استفاده از روش گرما وزن سنجی TGA بررسی شد. در مرحله بعد، 1 % وزنی نانوذرات اصلاح نشده و اصلاح شده به روش پلیمریزاسیون درجا، در کوپلیمر استایرن-بوتیل اکریلات (1:1) پخش گردید. با استفاده از روش‌های LLS و FTIR هویت‌شناسی لاتکس‌های سنتز شده انجام گرفت. نتایج به دست آمده از آزمون‌های هویت‌شناسی نانوذرات آماده‌سازی شده با ترکیب آلکوکسی سیلان، حاکی از برهم‌کنش‌های شیمیایی ترکیب سیلان‌دار با نانوذرات سیلیکا بود. بیشترین میزان پیوندخوری با سطح نانوذرات، حدود 32 % وزنی، در شرایط بهینه حداکثر میزان سیلان و آب، زمان طولانی‌تر واکنش و در pH معادل با 4 به دست آمد. همچنین نتایج آزمون‌های FTIR و LLS حاکی از موفقیت واکنش پلیمریزاسیون بود. نتایج به دست آمده نشان داد که استفاده از افزودن نانوذرات سیلیکا (اصلاح شده و اصلاح نشده) موجب افزایش اندازه ذرات لاتکس شده و اصلاح سطحی تأثیر زیادی بر اندازه ذرات لاتکس تشکیل شده ندارد.}, keywords_fa = {نانوذرات سیلیکا,آلکوکسی سیلان,اصلاح سطح,پلیمریزاسیون درجا}, url = {https://jcst.icrc.ac.ir/article_76076.html}, eprint = {https://jcst.icrc.ac.ir/article_76076_fecfe826f5979529685868bec35ca5f7.pdf} } @article { author = {Poursaaberi, T. and Torkestani, S. K. and Rezapour, M. and Hassanisadi, M.}, title = {Design of a Sulfate Selective Optode Based on the Fluorescence Characteristics of the Pyrylium Derivative Dye}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {47-52}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Fluorescent materials are some kind of reagents with vast applications in sensors. Considering the importance of the deremination of sulfate ion in environmental, chemical, pharaceuticals and food samples, in this research we used the fluorescence properties of 2,6-diphenyl-pyrylium tetrafluoroborate (DPF) for the design and construction of an optical sensor for the determination of SO42- ions. The results showed that the fluorescence intensity of DPF quenched upon the addition of sulfate ions, which was proportional to the sulfate concentration. Effective parameters were optimized and under optimal conditions the proposed optode was successfully applied to the determination of sulfate content in a drug sample.}, keywords = {Optical sensor,Sulfate ion,2,6-diphenyl-pyrilium tetrafluoroborate,Salbutamol sulfate}, title_fa = {استفاده از خصلت فلوئورسانس مشتق رنگزای پیریلیومی جهت طراحی حسگر نوری سولفات گزین}, abstract_fa = {مواد فلوئورسنت جزء معرف‌هایی هستند که درحسگرها کاربردهای فراوانی یافته‌اند. با توجه به اهمیت تعیین آنیون سولفات در نمونه‌های زیست محیطی، شیمیایی، دارویی و خوراکی، در این تحقیق از خاصیت فلوئورسانس ماده رنگزای 2و6-دی فنیل پیریلیوم تترافلوئوروبورات جهت طراحی و ساخت حسگر نوری سولفات گزین استفاده شد. نتایج نشان داد که شدت فلوئورسانس ماده رنگزا در اثر افزایش یون سولفات کاهش می‌یابد. به طوری که این کاهش متناسب با غلظت یون سولفات می‌باشد. عوامل مؤثر بر اندازه‌گیری شرایط بهینه از حسگر جهت اندازه‌گیری یون سولفات در دارو به طور موفقیت‌آمیزی استفاده شد.}, keywords_fa = {حسگر نوری,یون سولفات,2و6,دی فنیل پیریلیوم تترافلوئوروبورات,سالبوتامول}, url = {https://jcst.icrc.ac.ir/article_76077.html}, eprint = {https://jcst.icrc.ac.ir/article_76077_db56a6a1220218dc7b1f6b504d36443d.pdf} } @article { author = {Kheirabadi, S. and Khorasani, M. and Sarabi, A. A.}, title = {Investigation on the Effect of Physical Properties on Adhesion and Corrosion of Latex Paints Applied on Ferrous Substrates}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {53-59}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The sipomer Pam 100(sp100) monomer is introduced by Rodia company as adhesion promoter of lattices. In this research, an acrylic- styrene latex is synthesized. Sp100 was included in the range of 1-10% by the weight of the monomers. The other monomers were styrene methyl methacrylate (MMA), ethyl acrylate(EA) and acrylic acid(AA). Optimum contenet of sp100 was obtained at 10%. In the next step the effect of Tg on corrosion and adhesion in the absence of sp 100 was investigated using Fox equation . The best result of adhesion was obtained at Tg 30°C; and the least corrosion occurred at -10°C.In the third step of this research the synthesized lattices were neutralizeaed with different bases: NaOH, amonia and monoethanolamine then they compared with their acid form.The best adhesion and corrosion resistance was obtained by the sample which neutralized by NaoH and Ammonia respectively. Adhesion evaluated by cross cut test and corrosion was studied by salt spray under the standards ASTM D3359 and ASTM D714 respectively.}, keywords = {Adhesion,corrosion,Emulsion polymerization,sipomer pam 100}, title_fa = {بررسی اثر ویژگی‌های فیزیکی رزین براستحکام چسبندگی و مقاومت خوردگی پوشش‌های لاتکس در زیرآیندهای آهنی}, abstract_fa = {منومر sipomer pam 100sp محصول Rhodia به عنوان عامل بهبود دهنده چسبندگی سیستم‌های اکریلیکی معرفی شده است. در این تحقیق یک لاتکس بر پایه اکریلیک ـ استایرن سنتز شد .منومر sp در محدوده 10%-1 وزنی منومرها استفاده شد. سایر منومرها عبارت بودند از استایرن، متیل متاکریلات، اتیل اکریلات و اسید اکریلیک.در لاتکس نرم با محتوای 10% sp بهترین نتایج چسبندگی و خوردگی به دست آمد. افزایش sp تاثیر مثبتی بر چسبندگی لاتکس سخت نداشت. در مرحله بعدی با به کارگیری قانون FOX اثر تغییرات Tg برچسبندگی و خوردگی لاتکس بدون حضور sp بررسی شد. بهترین نتیجه چسبندگی در دمای انتقال شیشه‌ای oC 30-20 و کمترین خوردگی در oC 10- به دست آمد. در بخش سوم این تحقیق لاتکس‌های سنتز شده بدون sp با عوامل سود، آمونیاک و آمین خنثی‌سازی و با فرم اسیدی مقایسه گردید .بهترین چسبندگی از نمونه خنثی‌سازی شده با سود و کمترین خوردگی از نمونه خنثی شده با آمونیاک حاصل شد. بررسی چسبندگی توسط کراس کات و خوردگی با آزمون مه نمکی طبق استانداردهای ASTM D3359و ASTM D714صورت گرفت.}, keywords_fa = {چسبندگی,خوردگی,پلیمریزاسیون امولسیونی,sipomer pam 100}, url = {https://jcst.icrc.ac.ir/article_76078.html}, eprint = {https://jcst.icrc.ac.ir/article_76078_e6624e3f27c0480be286587e37e59b25.pdf} } @article { author = {Hossein nezhad, M. and Gharanjig, K. and Moradian, S.}, title = {The Synthesis and Application of a New Disperse Dye Based on Indoline on Polyester Fibers}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {61-68}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, a novel disperse dyestuff based on indoline derived from phenothiazine as the starting material using a standard methods was prepared. To this end, phenothiazine was exposed to some consecutive reactions including alkylation, oxidation, nitration, and redox reactions in order to obtain the synthesized disperse dyestuff. All intermediates and the final disperse dyestuff were purified and then characterized by the use of DSC, FTIR, 1HNMR, 13CNMR, elemental analysis and UV-Visible spectrophotometry. Spectrophotometric properties of the prepared dyestuff in various solvents such as toluene, DMF and acetone showed that the synthesized dyestuff has a positive solvatochromism effect as well as appropriate color strength. Finally, the synthesized dyestuff was used to dye polyester fibers at high temperature (i.e. 130 ºC). The measured spectrophotometric attributes of dyed fibers showed that the synthesized dyestuff has a good build up on polyester fibers. In addition, assessment of fastness properties of dyed fibers showed that the synthesized dyestuff has excellent wash and sublimation fastnesses as well as good to very good light fastness.}, keywords = {Phenothiazine,polyester,Disperse dyestuff,Alkyltion,Synthesis}, title_fa = {سنتز و کاربرد یک ماده رنگزای دیسپرس جدید بر پایه ایندولین بر روی الیاف پلی‌استر}, abstract_fa = {یک ماده رنگزای جدید بر پایه ایندولین با استفاده از فنوتیازین به عنوان ماده اولیه سنتز شد. در این راستا فنوتیازین با انجام یک‌سری واکنش‌های متوالی از قبیل آلکیل‌دار کردن، اکسایش، نیترودار کردن و احیاء به ماده رنگزای دیسپرس تبدیل شد. تمامی مواد واسطه و ماده رنگزای سنتز شده خالص گردید و به روش‌های دستگاهی مختلف از قبیل UV-Vis, DSC, FTIR, 1HNMR, 13CNMR و آنالیز عنصری شناسایی شدند. بررسی خواص اسپکتروفوتومتری ماده رنگزای سنتز شده در حلال‌های تولوئن، استن و DMF نشان داد که ماده رنگزای سنتز شده دارای قدرت رنگی نسبتاً خوبی بوده و دارای اثر سولواتوکرومیزم مثبت است. در نهایت دیسپرسیونی از ماده رنگزای سنتز شده برای رنگرزی الیاف پلی‌استر به روش دما بالا (HT) به کار برده شد. نتایج نشان داد که ماده رنگزای سنتز شده دارای خواص و قابلیت رنگرزی خوبی بر روی الیاف پلی‌استر است. ضمناً اندازه‌گیری خواص ثباتی ماده رنگزا بر روی الیاف پلی‌استر نشان داد که ماده رنگزای سنتز شده دارای ثبات شستشویی و سایشی عالی و ثبات نوری متوسط است.}, keywords_fa = {فنوتیازین,پلی‌استر,ماده رنگزای دیسپرس,آلکیل‌دار کردن,سنتز}, url = {https://jcst.icrc.ac.ir/article_76079.html}, eprint = {https://jcst.icrc.ac.ir/article_76079_08d9a34b5886ab411d4b050e1b3b057d.pdf} } @article { author = {Rashvand, M. and Ranjbar, Z.}, title = {Study of the Effect of Nano Zinc Oxide and Nano Titania Particles as UV Stabilizer in the Waterborne Polyurethane Coatings in Accelerated Weathering Conditions}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {69-74}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Recently, demands for the automotive coatings with good protective resistance and better appearance are grown up. So that in this research two kinds of UV stabilizer, nano Zinc Oxide and nano Titania were used in an automotive corrosion resistant primer to improve the light resistance of coatings. After that the corrosion resistance of the nano composite coatings, under some accelerated weathering condition like dry UV cabin and immersion in 3.5 wt% NaCl solutions were studied. The results show that presence of these additives even in a small amount could improve about 10 times the UV stability and corrosion resistance of coatings.}, keywords = {Light stabilizer,Nano zinc oxide,Nano titania,Coating film,Polyurethane}, title_fa = {بررسی اثر نانوذرات اکسیدی روی و نانوتیتانیا بر خواص حفاظتی پوشش‌های پلی‌یورتانی آب‌پایه در محیط شتابیده محفظه نور فرابنفش}, abstract_fa = {با وجود اینکه اخیراً صنعت خودرو پیشرفت قابل توجهی در تولید پوشش‌های خودرویی با کارایی بسیار خوب داشته است، در حال حاضر تقاضاهای مردمی برای پوشش‌هایی با پایداری نوری خوب و ظاهری بهتر بیشتر شده است. از این رو در تحقیق حاضر برای افزایش پایداری نوری سیستم پوششی، از دو ماده پایدارکننده نوری UV با نام‌های نانو اکسید روی و نانو تیتانیا استفاده شد و این مواد به لایه آستر ضدخوردگی یک سامانه پوشش خودرویی افزوده شدند. پس از آماده‌سازی نمونه‌ها اثر این مواد جاذب بر روی مقاومت به خوردگی پوشش تحت شرایط جوی شتابیده از قبیل آزمون های محفظه UV، غوطه‌وری در محلول 3.5 درصد کلرید سدیم مورد بررسی قرار گرفت. نتایج نشان داد که حضور بسیار اندک این جاذب‌های نور UV باعث بهبود پایداری جوی و خواص ضدخوردگی پوشش تا 10 برابر بیشتر نسبت به پوشش بدون پایدارکننده می‌شود.}, keywords_fa = {پایدارکننده‌های نوری,نانو اکسید روی,نانو تیتانیا,فیلم پوششی,پلی‌یورتان}, url = {https://jcst.icrc.ac.ir/article_76080.html}, eprint = {https://jcst.icrc.ac.ir/article_76080_97ba947c6d0f2ee410a6069dc770a34c.pdf} } @article { author = {Ameri, F. and Moradian, S. and Gharanjig, K.}, title = {Assessment of Various Color-Matching Procedures Utilizing Spectral Decomposition Theory}, journal = {Journal of Color Science and Technology}, volume = {7}, number = {1}, pages = {75-83}, year = {2013}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The aim of the present study was to investigate and compare the performance of various color matching procedures inclusive of color matching based on Allens rough match and an iterative procedure using the CIELAB color difference formula, spectrophotometric procedures such as McGinnis least square method, iterative method, weighted iterative method and spectrophotometric color matching based on fundamental color stimulus. To this end, 165 samples were dyed. Initially, the comparisons were made theoretically on the basis of color differences and indices of metamerism. Additionally, such comparison was extended practically by dyeing 24 real dyed samples. Practical results were in good agreement with the theoretical results, showing a relatively better performance of the spectrophotometic color matching procedure based on the fundamental color stimulus.}, keywords = {Color Matching,Kubelka-Munk theory,Fundamental color stimulus,Metamerism}, title_fa = {ارزیابی روش‌های رنگ همانندی با به کارگیری تئوری تجزیه طیفی}, abstract_fa = {هدف از این تحقیق بررسی و مقایسه عملکرد روش‌های مختلف رنگ همانندی می‌باشد. روش‌های بررسی شده در این تحقیق شامل رنگ همانندی بر اساس حدس اولیه آلن و روش تکرار بر اساس معادله اختلاف رنگ CIELAB (روش‌های کالریمتری) می‌باشد. علاوه بر این، روش‌های اسپکتروفوتومتری همچون روش حداقل مربعات مک گینس، روش تکرار، روش تکرار وزن داده شده و رنگ همانندی اسپکتروفوتومتری با استفاده از مقادیر محرکه رنگ پایه نیز مورد بررسی قرار گرفتند. با به کارگیری نسخه‌های متفاوت از مواد رنگزا، تعداد 165 نمونه مورد رنگرزی قرار گرفتند. جهت بررسی میزان موفقیت هر یک از روش‌های مذکور در تخمین این 165 نمونه، برای هر روش مواردی همچون اختلاف رنگ و اندیس متامریزم مورد ارزیابی قرار گرفت. در نهایت جهت بررسی عملی، پیشگویی‌های انجام شده توسط برخی از این روش‌ها در مورد 24 نسخه از 165 نسخه رنگرزی شدند که نتایج حاصله هم راستا و موید نتایج تئوری بوده و نشان‌دهنده برتری نسبی روش رنگ همانندی اسپکتروفوتومتریک با استفاده از مقادیر محرک رنگ پایه می‌باشد.}, keywords_fa = {رنگ همانندی,تئوری کیوبلکا,مانک,محرک رنگ پایه,متامریزم}, url = {https://jcst.icrc.ac.ir/article_76081.html}, eprint = {https://jcst.icrc.ac.ir/article_76081_6ffa6d84dba78cfeb2c0d40653640e34.pdf} }