@article { author = {Mahdavian ahadi, M. and Tehrani-Bagha, A.R. and Ashhari, Sh.}, title = {Study of Anticorrosive Behavior of a Gemini Cationic Surfactant and Its Monomeric Counterpart on Mild Steel in Hydrochloric Acid During Immersion Time}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {1-7}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Anticorrosive property of a gemini cationic surfactant (12-4-12) and its monomeric counterpart, dodecyl trimethyl ammonium bromide (DTAB), on mild steel in 1M hydrochloric acid solution was investigated by electrochemical impedance spectroscopy (EIS). The results revealed the corrosion inhibition effect of these two surfactants on mild steel in acidic solution. It was observed that by increasing the immersion time in test solutions, corrosion resistance of mild steel increased, reaching a constant value after 2 h and 4 h immersions for 12-4-12 and DTAB, respectively. The monomeric surfactant, DTAB, had better corrosion inhibition effect compared to 12-4-12. The lower performance of 12-4-12 could be related to steric hindrance of the free head group.}, keywords = {Corrosion Inhibition,Mild steel,Hydrochloric acid,cationic surfactant,Gemini surfactant,electrochemical impedance spectroscopy}, title_fa = {بررسی رفتار ضدخوردگی یک سطح فعال کاتیونی دو قلو در مقایسه با نمونه مونومری آن بر روی فولاد نرم در محلول اسیدکلریدریک طی زمان غوطه‌وری}, abstract_fa = {خاصیت ضد خوردگی سطح فعال دو قلوی کاتیونی (12-4-12) در مقایسه با نمونه مونومری آن، دودسیل تری متیل آمونیوم بروماید (DTAB)، بر روی فولاد نرم در محلول 1 مولار اسیدکلریدریک به کمک آزمون طیف‌سنجی امپدانس الکتروشیمیایی (EIS) مورد بررسی قرار گرفت. نتایج نشان‌دهنده اثر بازدارندگی خوردگی این دو ترکیب بر روی فولاد نرم در محیط اسیدی است. همچنین مشاهده شد که با افزایش زمان غوطه‌وری نمونه‌ها در محلول‌های آزمون، مقاومت در برابر خوردگی فولاد نرم افزایش یافت و به یک حد ثابت برای سطح فعال دو قلو 12-4-12 (طی 2 ساعت) و DTAB (طی 4 ساعت) رسید. سطح فعال مونومری DTAB در مقایسه با نمونه دوقلوی خود 12-4-12 اثر بازدارندگی خوردگی بهتری داشت که این موضوع احتمالاً به سبب ممانعت فضایی ایجاد شده توسط یک سر آزاد سطح فعال دو قلو است.}, keywords_fa = {بازدارندگی خوردگی,فولاد نرم,اسید کلریدریک,سطح فعال کاتیونی,سطح فعال دوقلو,طیف‌سنجی امپدانس الکتروشیمیایی}, url = {https://jcst.icrc.ac.ir/article_75965.html}, eprint = {https://jcst.icrc.ac.ir/article_75965_8adfa5825a05466bf4c7f48d11485211.pdf} } @article { author = {Rasouli, S. and Oshani, Fatemeh and Abdollahi, S.}, title = {Use of Organic and Inorganic Pigments for Preparation of Colored Mica}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {9-15}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In recent years hybrid pigments based on mica and an organic pigment have been prepared and used in different applications. In this paper, preparation of a colored mica was investigated and the samples were characterized by ultraviolet visible spectroscopy, optical and electronic microscopes. Results showed that the dye-uptake (%) on the mica surface varied from 10 to 80 percent depending on pH. Maximum dye-uptake was observed for pH 5-6. L*, a*, b*, h and C* values from colorimetric investigation demonstrated that colored mica samples of yellow, blue, gray and purple were prepared. It was shown that by this method not only the primary colors but also the secondary colors can be prepared.}, keywords = {MICA,Organic pigment,Inorganic pigment,Hybrid pigment}, title_fa = {استفاده از رنگدانه‌های آلی و معدنی در تهیه میکای رنگی}, abstract_fa = {در سال‌های اخیر، رنگدانه‌های ترکیبی که از ترکیب یک رنگدانه صدفی و یک رنگدانه آلی تهیه می‌شوند تهیه شده و به بازار عرضه شده‌اند. در این مقاله، تهیه میکای رنگی با استفاده از رنگدانه‌های آلی و معدنی مورد بررسی قرار گرفته و مشخصات نمونه‌های ساخته شده با به کارگیری روش‌های رنگ‌سنجی، UV-Visible و میکروسکوپ‌های نوری و الکترونی مطالعه شدند. نتایج نشان دادند که میزان جذب رنگدانه‌ها بر سطح پولک‌های میکا از 10 الی 80 درصد متغیر بوده و بستگی زیادی به pH محیط واکنش دارد و بیشترین جذب در pH 5 الی 6 به دست می‌آید. نتایج رنگ‌سنجی برای متغیرهای h،C*، b*، a* و L* نشان دهنده تهیه رنگدانه‌های زرد نسبتاً پر رنگ، آبی با خلوص رنگی مناسب، خاکستری روشن و یک رنگ قرمز با ته رنگ آبی است. تهیه رنگ ارغوانی که از نشاندن رنگدانه‌های آبی و قرمز به طور همزمان بر سطح پولک‌های میکا به دست آمد مؤکد این نظر است که با این روش نه تنها رنگ‌های اصلی بلکه امکان تهیه محدوده وسیعی از رنگ‌های ثانویه نیز وجود دارد.}, keywords_fa = {میکا,رنگدانه آلی,رنگدانه معدنی,رنگدانه ترکیبی}, url = {https://jcst.icrc.ac.ir/article_75966.html}, eprint = {https://jcst.icrc.ac.ir/article_75966_f7c693cd63b2eb05b835a2c74361a5b6.pdf} } @article { author = {Rasoulifard, M. H. and Taheri Qazvini, N. and Farhangnia, E. and Heidari, A. and Doust Mohamadi, S. M. M.}, title = {Removal of Direct Yellow 9 and Reactive Orange 122 from Contaminated Water Using Chitosan as a Polymeric Bioadsorbent by Adsorption Process}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {17-23}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The present study was carried out to investigate the effect of chitosan on the removal of Direct Yellow 9 and Reactive Orange 122 from contaminated water in comparison to activated carbon using batch adsorption studies.Chitosan has been selected as an adsorbent because of advantages such as high adsorption capacity, potential of variety of pollutants removal, non toxicity, availability, low cost and high rate of adsorption. Also the effect of contact time, initial dye concentration, adsorbent dosage, temperature and pH were examined and then removal efficiency of chitosan as compared to activated carbon was investigated. The results showed that removal of dyes increased by increasing contact time, adsorbent dosage, temperature and dye initial concentration decreasing. Also it may be concluded that chitosan was more effective than activated carbon.}, keywords = {Chitosan,Adsorption,Direct yellow 9,Reactive orange 122,Wastewater Treatment}, title_fa = {حذف رنگزای آلی آنیونی زرد مستقیم 9 و نارنجی راکتیو 122 از آب آلوده با استفاده از جاذب زیست پلیمری کیتوسان}, abstract_fa = {در تحقیق حاضر، هدف بررسی تأثیر کیتوسان بر حذف دو رنگزای آلی زرد مستقیم 9 (DY9) و نارنجی راکتیو 122 (RO122) از آب آلوده شده در مقایسه با کربن فعال در یک سیستم ناپیوسته می‌باشد. این جاذب با توجه به برتری‌هایی نظیر ظرفیت جذب بالا و قابلیت جذب انواع آلاینده‌ها بخاطر وجود گروه‌های عاملی فعال در ساختار کیتوسان، غیر سمی بودن، ارزانی، فراوانی و همچنین سرعت بالای جذب برای مطالعه انتخاب شده است. همچنین اثر عوامل مختلف نظیر زمان تماس، غلظت اولیه رنگزا، مقدار مصرفی جاذب، دما و pH بررسی شده و در نهایت میزان کارایی کیتوسان در حذف این دو رنگزا با کربن فعال مقایسه گردیده است. نتایج حاصل نشان داد که با افزایش زمان تماس، مقدار جاذب مصرفی، دما و کاهش غلظت اولیه رنگزا میزان جذب افزایش یافته است و به علاوه بیشترین میزان حذف در pH خنثی بوده است. همچنین نتایج حاصل بیانگر برتری و کارایی بالای کیتوسان نسبت به کربن فعال می‌باشد.}, keywords_fa = {کیتوسان,جذب سطحی,زرد مستقیم 9,نارنجی راکتیو 122,تصفیه پساب}, url = {https://jcst.icrc.ac.ir/article_75967.html}, eprint = {https://jcst.icrc.ac.ir/article_75967_2022dafa245145b1da2ebb2d0b591563.pdf} } @article { author = {Khatibzadeh, M. and Mohseni, M. and Moradian, S.}, title = {Studying the Dyeing of Fiber Grade PET Using a Hyperbranched Polymeric Additive}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {25-32}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {In this study, a hyperbranched dendritic additive was used to improve the dyeability of a fibre grade PET. Various samples were prepared in an internal mixer at different concentrations of this additive. DSC was used to study the thermal behavior of the resultant compounded samples. It was shown that Tg of samples decreased as the concentrations of the additive increased. This difference in Tg between the neat PET and the compounded samples composed of 3 wt% hyperbranched was about 11 ºC. Sheet films were prepared and were subsequently dyed using C. I. Disperse Yellow 114 in presence and absence of a carrier. K/S, the dye uptake parameter increased from 1.2 to 3.0 as the concentration of additive increase for samples dyed in the absence of a carrier. The results showed that the need for use of a toxic carrier can be eliminated by this procedure.}, keywords = {PET,Hyperbranched additive,dyeing,Carrier,Disperse dye}, title_fa = {بررسی رنگرزی پلی‌اتیلن ترفتالات مورد مصرف در الیاف با ماده رنگزای دیسپرس زرد 114 در حضور یک افزودنی پلیمر شاخه‌ای}, abstract_fa = {در این مقاله از یک پلیمر شاخه‌ای به عنوان یک ماده افزودنی از مولکول‌های درختی برای بهبود قابلیت رنگرزی پلی اتیلن ترفتالات مورد مصرف در الیاف استفاده گردید. نمونه‌های مختلفی با نسبت وزنی 0.5 تا 3.0 درصد از پلیمر شاخه‌ای و پلی‌استر به وسیله دستگاه مخلوط کن داخلی تهیه گردید. بررسی رفتار حرارتی آمیزه‌های حاصله بوسیله دستگاه DSC، حاکی از کاهش مقدار دمای شیشه‌ای نمونه‌ها با توجه به افزایش درصد ماده افزودنی بود. این کاهش Tg بین نمونه خالص پلی‌اتیلن ترفتالات و نمونه حاوی 3 درصد پلیمر شاخه‌ای، حدود 11 درجه سانتیگراد بود. نمونه‌های ورقه‌ای فیلم از آمیزه‌های مذکور تهیه و با ماده رنگزای زرد دیسپرس 114 در شرایط مختلف (در حضور حامل و بدون حامل و در دمای 130 درجه سانتیگراد) رنگرزی گردید. K/Sبه عنوان پارامتری جهت تعیین میزان رنگ‌پذیری نمونه‌ها محاسبه شد و نشان داد که با افزایش درصد پلیمر شاخه‌ای، قابلیت رنگرزی در حمام‌های بدون حامل از 1.2 به 3.0 و در حمام حاوی حامل به مقدار بیشتری افزایش می‌یابد.}, keywords_fa = {پلی اتیلن ترفتالات,افزودنی پلیمر شاخه‌ای,رنگرزی,حامل,ماده رنگزای دیسپرس}, url = {https://jcst.icrc.ac.ir/article_75968.html}, eprint = {https://jcst.icrc.ac.ir/article_75968_085eea7e4424343dcfc0de56e296e832.pdf} } @article { author = {Khani, H. and Aghdaee, S. R. and Ajeian, R.}, title = {Optimum Grain Size of Copper Phthalocyanine Pigments in Organic Thin Film Photoreceptors}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {33-39}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {One of the great concerns in the study of organic thin film photoreceptors is to enhance the efficiency of thin film photoreceptors. This efficiency is to a great degree, affected by pigment grain size dispersed in charge generation layer. In the first part of the project the average crystallite domain size and the root-mean-square strain of non milled sample of copper phthalocyanine and samples milled for 90, 180, 270 minutes have been determined using X-ray diffraction data and variance method. These samples were used as charge generation layers in the organic photoreceptors and their performances were evaluated. In the second part, copper phthalocyanine pigments were milled for 15, 30, 60, 90, 180, 270, 360, 600 minutes and their microstructures were studied as a function of milling time. Then the optimum grain size of pigments (in organic photoreceptors) were investigated.}, keywords = {Photoreceptors,X-ray diffraction,Line broadening,Microstructure,Copper phthalocyanine}, title_fa = {اندازه بهینه بلورک‌های رنگدانه فتالوسیانین مس در فیلم‏های نازک گیرنده‏های نوری‏آلی}, abstract_fa = {بهینه‌سازی کیفیت فیلم‌های نازک گیرنده‌های نوری آلی از مهمترین مباحث در زمینه درام‌های زیراکس و چاپگرهای لیزری به شمار می‏آید. یکی از عوامل مؤثر در آن، اندازه دانه‌های مواد تشکیل دهنده لایه تولیدکننده حامل بار می‏باشد. در نخستین بخش این پژوهش با استفاده از پراش پرتوهایX ، اندازه بلورک‌ها و کرنش شبکه نمونة آسیا نشده فتالوسیانین مس و نمونه آسیا شده آن در مدت زمان‌های 180،90 و270 دقیقه به روش واریانس تعیین شده است. این نمونه‌ها در لایه تولیدکنندة حامل‌های بار درگیرنده‌های نوری زیراکس به‏کار برده و کیفیت این گیرنده‌ها با یکدیگر مقایسه شده است. در بخش دیگر با استفاده از پراش پرتوهای X ، ریزساختار نمونه‌های آسیا شده فتالوسیانین مس در مدت زمان‌های 15، 30، 60، 90، 180، 270، 360 و600 دقیقه به روش واریانس تعیین و مقدار بهینه اندازه بلورک‌‌های فتالوسیانین مس(درفیلم‌های نازک گیرنده‌های نوری) معرفی شده است.}, keywords_fa = {گیرنده‌های نوری,پراش پرتوهای X,پهن‌شدگی خطوط پراش,ریزساختار,فتالوسیانین مس}, url = {https://jcst.icrc.ac.ir/article_75969.html}, eprint = {https://jcst.icrc.ac.ir/article_75969_200ac98c015186188e9630c1a9a96c02.pdf} } @article { author = {Goodarz, M. and Amani Tehran, M. and M. A. Malek, R. and Mazaheri, F. M.}, title = {Review of Expert Systems in the Coloration and Textile Industry}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {41-53}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {Artificial intelligence is an advanced technology which is recently taking into account by researchers. In fact, Artificial intelligence is a method that provides required base to do intelligent processes by computer. A branch of artificial intelligence is Expert systems. These systems are computer tools that imitate knowledge and inference procedures of human experts to solve problems related to a specialized domain, so they consult at the level of a human expert and necessarily decide. The aim of this paper is to review Expert systems and some recent applications of it in various areas of coloration and textile industry.}, keywords = {Expert System,automation,Textile,Coloration}, title_fa = {مروری بر سامانه‌های خبره در صنعت رنگرزی و نساجی}, abstract_fa = {هوش مصنوعی فناوری پیشرفته‌ای است که اخیراً از سوی محققان علوم مختلف بسیار مورد توجه قرار گرفته است. هوش مصنوعی در واقع روشی است که ساختارهای ضروری برای انجام عملیات هوشمند توسط رایانه را فراهم می‌نماید. یکی از کاربردهای هوش مصنوعی، ایجاد سامانه‌های خبره می‌باشد. این سامانه‌ها ابزارهای کامپیوتری هستند که فرآیند استنتاج و دانش افراد خبره را در حل مسائل یک حوزه تخصصی شبیه‌سازی می‌کنند و در نتیجه همانند یک فرد خبره در حوزه تخصصی خود، در مسائل مربوط به آن حوزه مشاوره می‌دهند و در صورت لزوم تصمیم‌گیری می‌نمایند. هدف این مقاله، مرور سامانه‌های خبره و کاربردهای جدید آن در صنعت رنگرزی و نساجی می‌باشد.}, keywords_fa = {سامانه خبره,خودکارسازی,نساجی,رنگرزی}, url = {https://jcst.icrc.ac.ir/article_75970.html}, eprint = {https://jcst.icrc.ac.ir/article_75970_0eb57631f3c838a39c69bd9b08329580.pdf} } @article { author = {Gharanjig, K. and Sadeghi-Kiakhani, M. and Tehrani-Bagha, A.R.}, title = {Solubilization of a Monoazo Naphthalimide Disperse Dye in the Presence of Gemini Cationic Surfactants}, journal = {Journal of Color Science and Technology}, volume = {4}, number = {1}, pages = {55-64}, year = {2010}, publisher = {Institute for Color Science and Technology with scientific cooperation of Iran Color Society}, issn = {1735-8779}, eissn = {2383-2169}, doi = {}, abstract = {The solubilization of a monoazo disperse dye based on naphthalimide containing an ester group in the presence of DTAB and two gemini cationic surfactants was investigated. The results showed that the solubilization power of gemini surfactants micelles was greater than that of conventional surfactant micelles (DTAB) for this dye. The nature of the visible absorption spectra in aqueous surfactant solutions above CMC was very similar to those in the ethanol solution. The solubilization power is strongly dependent on the surfactant structure and nature of micelles. The absorption of used disperse dye into polyester fabrics in the presence of cationic surfactants increased in the order of DTAB>12-4-12>14-414, once again confirming the higher solubilization power for gemini surfactants even at elevated temperatures.}, keywords = {Disperse dye,Solubilization,Gemini cationic surfactants,dyeing,Fastness properties}, title_fa = {انحلال یک ماده رنگزای مونو آزو دیسپرس نفتالیمید در حضور مواد فعال سطحی دو قلوی کاتیونی}, abstract_fa = {انحلال یک ماده رنگزای مونو آزو دیسپرس بر پایه نفتالیمد حاوی گروه استر در حضور مواد فعال سطحی کاتیونی مونومری (DTAB) و دو قلو مورد بررسی قرار گرفت. نتایج نشان می‌دهد که قدرت انحلال ماده رنگزای مورد بررسی در مایسل‌های مواد فعال سطحی کاتیونی دو قلو بیشتر از نمونه مرسوم مونومری می‌باشد. مطالعه اسپکتروفوتومتری ناحیه مرئی نشان داد که طیف جذبی و طول موج بیشینه جذب ماده رنگزای دیسپرس در حضور مایسل‌های سطح فعال‌های دوقلو بسیار شبیه رفتار جذبی در حلال اتانول است. توانایی انحلال به شدت وابسته به ساختار مواد فعال سطحی و طبیعت مایسل‌های آنها می‌باشد. جذب ماده رنگزای دیسپرس بر روی پارچه‌های پلی‌استری در حضور سطح فعال‌های کاتیونی به این صورت است : DTAB>12-4-12>14-414 که مجدداً قدرت حل‌کنندگی بالاتر سطح فعال‌های دوقلو را حتی در دماهای بالا نشان می‌دهد.}, keywords_fa = {ماده رنگزای دیسپرس,حلالیت,سطح فعال‌های دوقلوی کاتیونی,رنگرزی,خواص ثباتی}, url = {https://jcst.icrc.ac.ir/article_75971.html}, eprint = {https://jcst.icrc.ac.ir/article_75971_2d5e16cd8cd0085960805d07ab0ba0ff.pdf} }